Show Posts
|
Pages: « 1 2 [3] 4 5 »
|
I am still on version 2.4, does the newest version improve mining efficiency? i am not keen to keep uninstalling and reinstalling new versions and reconfiguring batch files each time.
Im also looking for diferences... apart from each miner for algo used(ps1 files inside miner folder), I found the earning tracker and brainplus (the ps1 files) have changed CPU priority 'below normal' on 3.0 maybe the new GUI stuff consume a bit more resources, not sure yet.
|
|
|
Can i just run bat with commands as before 3.0? I want to make a batch for different pools and GPUs as before
|
|
|
2018-03-21 08:29:05] Stratum connection failed: Failed to connect to mine.zergpool.com port 8533: Timed out [2018-03-21 08:29:05] ...retry after 30 seconds [2018-03-21 08:29:56] Stratum connection failed: Failed to connect to mine.zergpool.com port 8533: Timed out [2018-03-21 08:29:56] ...retry after 30 seconds [2018-03-21 08:30:47] Stratum connection failed: Failed to connect to mine.zergpool.com port 8533: Timed out [2018-03-21 08:30:47] ...retry after 30 seconds
Same here
|
|
|
Looking Last version 3.0 with Gui...Thats good advance even when im familiarized with bats and codes Few Questions: What if i Select many pools at time? Looks like I can check everything... Will it change pools if one down (Like ASIC)? Since it have GPU count... will it automatically adjust Hashrates depending of number of active GPUs for? I explained this few post above (Im keeping 2 Copies of Nemosminer to avoid Stats changed when using one or more GPUs)
|
|
|
Testing That New Ravenminer, hashrate is fluctuating between 17~12MH/S (1080Ti 65%TDP) some jumps up to 20Mh/s
After almost 10 mins of running, hashrates media for 2x 1080ti = 30Mh/s Compared to Ccminer 2.2.5 = 25.12 Mh/s from many days
Will keep running
After 2h of running: the average Hashrate dropped a bit Lot of fluctuation on hashrate Found a drops on hashrate per single GPU low as 8Mh/s Final Avg I got from both GPU is 28.5Mh/s
|
|
|
Testing That New Ravenminer, hashrate is fluctuating between 17~12MH/S (1080Ti 65%TDP) some jumps up to 20Mh/s
After almost 10 mins of running, hashrates media for 2x 1080ti = 30Mh/s Compared to Ccminer 2.2.5 = 25.12 Mh/s from many days
Will keep running
|
|
|
Even so, nemos leaves something to be desired. Even mining a single currency more or less good you get more benefits, or even just mining a single thing like X17 with Nvidia cards. Of the three sets, normal, 24h and plus, is that most often give benefits is 24, according to all my tests, but far from what can be obtained only by undermining a something or a currency of the TOP that makes nemo. This means that it has not yet defined the Switching of ALGOs. Moreover, it should change to currencies and not to something. Sometimes mine the second Something in profits, but within that SOMETHING there are good and bad currencies, and mine as much as others, instead of mining the right currency. You have to tune in to change something and mine the right coins. The same rig, according to statistics, would earn $ 16, but get $ 9, and if I do it looking for the currency with another program, my benefit may be 16 or more. The idea is good, it is still fresh, it still needs to mature. Maybe more quickly in the currency exchange to avoid losing in pumping or peaks, but I think the most natural way to work would be in the normal, real time, as long as exchange to BTC is done quickly. I like Nemo a lot, and I will continue to give you opportunities later on, but you still have to improve when it comes to changing something, and you should also choose currency. Many times we see as mine for example X17 and some coins with a ridiculous benefit and other good profit. That has to be improved, it is the key that the program needs to make a leap in quality. To me right now that a rig of 6 x 1080ti get as much as 16-17 $, it is lost of money, you get more if you lose time in looking for the currency of the moment. I wish great success to this product and I am looking forward to try version 0.3, and I hope to see more specialized miners in certain currencies, there are many more variants of ccminer for each something For example this next one is 15% faster in Lyra2rev2 and it is a fork of the Trupocvt https://hardwaresfera.com/traemos-minero-optimizado-protocolo-lyra2rev2-monacoin-vertcoin/I have also tried it with X17 and it gives very good results. To see the surprises that version 0.3 will bring us, to me the interface or some information options I do not care, I want a better switch of ALgos and coins By now you can set to mine a Single Coin on Nemos...just adding single coin on commands per algo also depends of the pool if allows to mine single coin. Will need gather info like what showed on Whattomine for most profitable SINGLE COINS, if Not just we are trusting on pools switching coin per algo BTW... can me explain how to use the earningtracker.bat on Nemos?
|
|
|
How to setup earnings tracker.bat? Works for any pool?
|
|
|
Hello! I want to mine on Nvideo, that you will advise mine and how many video cards you need for an income of $ 1000 per month?
The reality is that chasing new coins, creating wallets, dealing with shaky exchanges, etc. is a lot of work and takes experience. It sounds like you are a beginner, so you will/should start out on Nicehash while you learn. he should use MPH instead of Nicehash. Are you a noob too ? I used nicehash long time too, there is concrete proof that profits are lower than another other pools? Pools like Zpool, Zergpool are hard to tell profits since coins mined have to be confirmed first then pass to an exchange and after that you can increase your real balance.
|
|
|
I noticed that most people are using the ccminer from enemy-1.03 for RavenCoin (Info's Source: http://yiimp.eu/site/miners). However I can't find it available as open source and I'm afraid it might be doing something fishy on the background. People are already comenting here http://cryptomining-blog.com/9507-ccminer-enemy-1-03-fork-for-raven-rvn-mining-now-available/ about suspicious activity. TPRUVOT's ccminer is so buggy, it's always crushing even when KlausT's version keeps going with the same clocks. However KlausT hasn't add RVN support (at least yet). So... Is there any stable and safe miner for Raven? PS: TPRUVOT's ccminer hashrate is jumbing between 12 MH/s and 20 MH/s on 1080ti! WTH?! I reduced my clocks to try avoid crashes and I'm at 80% TDP, +70 GPU, +500 Memory. Let's see if it last more than 2 hours. Just using CCminer2.2.5 For me its stable at 65%, 12~15MH/s stock OC
|
|
|
Now that im running my both 1080TI GPU separately i noticed it records the hashrate per single GPU But if i Run one instance for my 2 GPU it displays what is recorded for single GPU, so after the first run it updates the hashrate for the First algo it was running, then it appears to have the double from the rest profit list recorded, so it will stick to that algo
For Example: Running one 1080TI or per instance I have: Equihash 650H/s = 0.260 mBTC/day Neoscrypt 1.45MH/s = 0.210 mBTC/day
if I set miner to run with both GPUs it starts to run the most profitable algo, but then: Hashrate Changes: Equihash: 650H/s -> 1.30 KH/s = 0.520 m/BTCday ¿What happens with the rest algos? Neoscrypt: (wont update) = 1.45MH/s = 0.300 mBTC/day (This was per single GPU)
Even when Neoscrypt per GPU is more profitable, miner wont turn to it, because Equihash shows profit for GPUs and it thinks is the double
My temporary solution for this? I had to make 2 copies of Nemosminer folder, one for batches when i run singles GPU, and another if running all my GPUs together, so profits wont mess.
This to keep on mind wether you change your settings OC, Number of GPUs etc... There isnt an option to make miner a bit smarter enough to know how many GPUs im using ? Since all my GPUs would be the same... there is a way to keep the hashrate per single GPU (with same OC settings) and then just multiply by number of active GPU at that time? Looks like it will need a Benchmark everytime I add or change something on my system (GPUs, OC)
|
|
|
Now that im running my both 1080TI GPU separately i noticed it records the hashrate per single GPU But if i Run one instance for my 2 GPU it displays what is recorded for single GPU, so after the first run it updates the hashrate for the First algo it was running, then it appears to have the double from the rest profit list recorded, so it will stick to that algo
For Example: Running one 1080TI or per instance I have: Equihash 650H/s = 0.260 mBTC/day Neoscrypt 1.45MH/s = 0.210 mBTC/day
if I set miner to run with both GPUs it starts to run the most profitable algo, but then: Hashrate Changes: Equihash: 650H/s -> 1.30 KH/s = 0.520 m/BTCday ¿What happens with the rest algos? Neoscrypt: (wont update) = 1.45MH/s = 0.300 mBTC/day (This was per single GPU)
Even when Neoscrypt per GPU is more profitable, miner wont turn to it, because Equihash shows profit for GPUs and it thinks is the double
My temporary solution for this? I had to make 2 copies of Nemosminer folder, one for batches when i run singles GPU, and another if running all my GPUs together, so profits wont mess.
|
|
|
Look at this... 13 Hours Running 2 1080ti , one on one each pool the 24h variation What causes this crazy peaks? I dont think its a pool issues
|
|
|
How About Zergpool? BTW: Nicehash are making payments faster than treshold stated. Just got a payment of 0.0027BTC, im afraid it doesnt support new algos like phi or X17
|
|
|
1080Ti OC edition here
What would be the best Scenario? For efficiency and Health of GPU? Have Them to 65% TDP Stocks Clocks? Having 65% TDP and give OC to Core Clock?
I noticed that as i keep the TDP a fixed rate (tested with 65%) the temps and wattage keeps the same even i set Clocks to the MAX However the Hashes only increased a tiny bit, not more than 5% If this affect to the health of my GPUs wont worth it though.
|
|
|
Hello, anyone knows, if exists already, any site P2P like Localbitcoins where you can buy/sell Cryptos (BCH, LTC, Dash, ETH, Zcash...) and not just BTC?
Maybe is not the best to exchange everything onto BTC to get FIAT. I would lose money between transactions from a wallet --> exchange and them send to LBC.
|
|
|
If ASICs would mine another algos just like GPUs would be worth, even when its not the best for that algo. Just like Nvidias arent the best mining ETH, but you can put them to mine it at will.
|
|
|
Maybe they have the chip, but different components and no the Nvidia Logo. maybe they lack some factory quality tests. Whatever, if you take a look at your 1080TI it says "Made in China"
Just like diamonds, market makes them expensive and look rare.
|
|
|
Hello, what pool/currency would you recommend for 2x1080TIs? Altminer with Luxcoin Agree with LUXCoin, another pool for LUXCoin is Yiimp if any availability/capacity. Also look at BTX, pool Bitcorepool. This pool dont exchange to BTC, then you have to mess with exchanges, just saying.
|
|
|
|