 Show Posts
|
|
Pages: « 1 2 [3] 4 5 6 »
|
How can I write lets say -clkernel 3 for GPU 1 2 3 5 9 and -clkernel 2 for GPU 4,6,7,8,10
Thanks in advance.
***Also, I get slower hash rate with my 4GB cards. I guess that is normal with past the DAG epoch 235?
like this: -clkernel 3332322232 It doesn't work. how about this? -clkernel 3,3,3,2,3,2,2,2,3,2 |
|
|
|
Hi all i have probleme with new version phoenix . With old version on all my r9 290 Trix i have 28 29 mh/s and now i have only 23 mh/s if a member have same probleme and he have resolve whrit here please . Thanks for your help .
What driver are you using?
What OS?
Did you let the auto tun run?
Did you change any settings after the last auto tune was run?
|
|
|
|
will you have support for ProgPoW?
Yes, absolutely. We will be ready for the future switch to ProgPow. Need to enable the user to increase the check interval for -wdog, for example -wdogtime 90. Now it costs 30 seconds, sometimes it’s not enough
We will add a similar option in 4.1b, which will be released in a few days. It should be noted that in this mode -clkernel 3, with the default setting -rvram video cards consume more power on average 2-4% and there will be more virtual memory loading, so maybe someone will need to increase it
Yes, depending on your overclocking settings the turbo kernels may consume more power. Also, you must re-run auto-tuning because the optimal -gt values will most likely be quite different for the new kernels. Note that you must also re-run auto-tune if you have AMD 280/285/290/380/390 GPU, because of updated kernels for these GPUs. any plans for kernal 3 for fury x or vega 64? also the setting of etth (claymore lower limti of 50 being lowered to 25?) i think can help squeeze out some more hashs.. thanks |
|
|
|
Hi, okay i tried those suggestions Phoenix Miner 4.0b Windows/msvc - Release build
-----------------------------------------------
CUDA version: 10.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 970 (pcie 1), CUDA cap. 5.2, 4 GB VRAM, 13 CUs
Nvidia driver version: 416.16
Eth: Loading pools from epools.txt
Eth: the pool list contains 2 pools (0 from command-line)
Eth: primary pool: eu1.ethermine.org:4444
Starting GPU mining
Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy)
Listening for CDM remote manager at port 3333 in read-only mode
GPU1: 39C 0%
Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.106)
Eth: New job #2f953f33 from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #233
Light cache generated in 2.8 s (16.1 MB/s)
GPU1: Allocating DAG (2.84) GB; good for epoch up to #235
GPU1: Generating DAG for epoch #233
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 13%
Eth: New job #5fecb20d from eu1.ethermine.org:4444; diff: 4000MH
GPU1: DAG 28%
GPU1: DAG 44%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 59%
GPU1: DAG 75%
Eth: New job #5aa8689d from eu1.ethermine.org:4444; diff: 4000MH
GPU1: DAG 91%
GPU1: DAG generated in 10.3 s (280.0 MB/s)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
CUDA error in CudaProgram.cu:329 : unspecified launch failure (719)
GPU1 search error: unspecified launch failure
Thread(s) not responding. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Eth: New job #54d320ba from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
CUDART error in CudaProgram.cu:57 : all CUDA-capable devices are busy or unavailable (46)
GPU1 initMiner error: all CUDA-capable devices are busy or unavailable thanks for taking the time, any suggestions? all that i can think of is nvidia driver is issue. tray latest so you can do at least cuda 9 or even try for cuda 10 see what happens. Look carefully. Already cuda10.. Yup I saw but that is now several months old.. here is latest https://www.nvidia.com/Download/driverResults.aspx/141169/en-usTry it then see. Also do you have any integrated motherboard video cards? If so disable them. |
|
|
|
Hi, okay i tried those suggestions Phoenix Miner 4.0b Windows/msvc - Release build
-----------------------------------------------
CUDA version: 10.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 970 (pcie 1), CUDA cap. 5.2, 4 GB VRAM, 13 CUs
Nvidia driver version: 416.16
Eth: Loading pools from epools.txt
Eth: the pool list contains 2 pools (0 from command-line)
Eth: primary pool: eu1.ethermine.org:4444
Starting GPU mining
Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy)
Listening for CDM remote manager at port 3333 in read-only mode
GPU1: 39C 0%
Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.106)
Eth: New job #2f953f33 from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #233
Light cache generated in 2.8 s (16.1 MB/s)
GPU1: Allocating DAG (2.84) GB; good for epoch up to #235
GPU1: Generating DAG for epoch #233
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 13%
Eth: New job #5fecb20d from eu1.ethermine.org:4444; diff: 4000MH
GPU1: DAG 28%
GPU1: DAG 44%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 59%
GPU1: DAG 75%
Eth: New job #5aa8689d from eu1.ethermine.org:4444; diff: 4000MH
GPU1: DAG 91%
GPU1: DAG generated in 10.3 s (280.0 MB/s)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
CUDA error in CudaProgram.cu:329 : unspecified launch failure (719)
GPU1 search error: unspecified launch failure
Thread(s) not responding. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Eth: New job #54d320ba from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
CUDART error in CudaProgram.cu:57 : all CUDA-capable devices are busy or unavailable (46)
GPU1 initMiner error: all CUDA-capable devices are busy or unavailable thanks for taking the time, any suggestions? all that i can think of is nvidia driver is issue. tray latest so you can do at least cuda 9 or even try for cuda 10 see what happens. |
|
|
|
Have you tried increasing the virtual memory to something higher? How much ram does this system have?
Also if they are just nvidia based cards try adding -nvidia to your bat.
Seeing your startup command line would help... Thanks for the reply. RAM is 12.GB, I added -nvidia unfortunately no luck: REM
REM Example bat file for starting PhoenixMiner.exe to mine ETH
REM
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig002 is the name of the rig)
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal XXXX.Rig002 - nvidia
pause
Thanks so much. There is an error: PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal XXXX.Rig002 - nvidia Should be: PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal XXXX.Rig002 -nvidia Also Ethermines page shows: PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal YourEthWalletAddress.WorkerName -proto 3 I would try: PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x6b7b526b85F59098c4C9704d4A74b705A743B137.Rig002 -nvidia -coin eth -proto 3 What happens then? If still an issue I have one more idea... |
|
|
|
Hi guys, I have a gtx 1060 6gb mining pretty good on Phoenix i want to add another pc to the pool which has got a GTX 970 OC 4GB when i start Phoenix i get this error CUDA version: 10.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 970 (pcie 1), CUDA cap. 5.2, 4 GB VRAM, 13 CUs
Nvidia driver version: 416.16
Eth: Loading pools from epools.txt
Eth: the pool list contains 4 pools (2 from command-line)
Eth: primary pool: ssl://eu1.ethermine.org:5555
Starting GPU mining
Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
Listening for CDM remote manager at port 3333 in read-only mode
GPU1: 57C 64%
Eth: New job #a528de10 from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #233
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Light cache generated in 4.1 s (10.9 MB/s)
GPU1: Allocating DAG (2.84) GB; good for epoch up to #235
CUDA error in CudaProgram.cu:407 : out of memory (2)
GPU1 initMiner error: out of memory
Thread(s) not responding. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 I have edited the .bat file and added my eth wallet and put .rig002 .. (since my first pc is rig001) Please assist? Have you tried increasing the virtual memory to something higher? How much ram does this system have? Also if they are just nvidia based cards try adding -nvidia to your bat. Seeing your startup command line would help... |
|
|
|
hi guys, im new at Phoenix miner, can someone help me with bat file, what to do to make my miner more stable.i didnt oc to much, i have rx 580 nitro and my oc is cclock 1150 and mclock 2050. and i also get this message, but i see my rig at pool. ''Invalid wallet 'YourWallet.DESKTOP-TJ077KR' specified for pool 1 from epools.txt. Replace with a real wallet' Thanks in advance :-)
this message just means you have no default wallet ID in epools.txt. If you have correct wallet/pool login in start up file then that can be ignored. If not then needs to be corrected. in terms of stability. Let it auto tune first time make note of numbers then. add -gt x,x,x (depends on how many gpus you have one x for each). That will in most cases give you decent speeds. Ah thanks, i was bit confused with that wallet error. I double checked and everything was fine, but error was still there. I have 6 gpu-s on that rig all rx 580 elpida memory. What should i enter for -gt? There will be 6 different numbers for each GPU. It can take 5 mins or so before it complete autotune process. Wait until you get all of them. Note them and voila add to bat startup |
|
|
|
hi guys, im new at Phoenix miner, can someone help me with bat file, what to do to make my miner more stable.i didnt oc to much, i have rx 580 nitro and my oc is cclock 1150 and mclock 2050. and i also get this message, but i see my rig at pool. ''Invalid wallet 'YourWallet.DESKTOP-TJ077KR' specified for pool 1 from epools.txt. Replace with a real wallet' Thanks in advance :-)
this message just means you have no default wallet ID in epools.txt. If you have correct wallet/pool login in start up file then that can be ignored. If not then needs to be corrected. in terms of stability. Let it auto tune first time make note of numbers then. add -gt x,x,x (depends on how many gpus you have one x for each). That will in most cases give you decent speeds. GLTU |
|
|
|
|
Hi a few notes:
Using newer 18.2.2 or 18.2.3 AMD drivers I an not able to make clNew kernels to be used, i define them as 1 but they are set to 0.
this is for vega 64 and fury x
Also the commands -etht its lower limit is 50 but i think going to 25 might allow even faster mining.
Thanks
|
|
|
|
Anyone tried the new amd 18.8.1 driver yet ?
I have I updated to aug windows august update and AMD 18.8.1. works fine Any increase in hashrate after the update to 18.8.1? Still running the blockchain drivers from last year and if they are hashing at around the same then I wouldn't bother to update them since they are stable enough running for the past 6 months. i ve let it run now almost 24hrs, am finding it actually a bit slower. I think the new AMD optimizations in the driver may have reduced some phoneix kernel speed. |
|
|
|
Anyone tried the new amd 18.8.1 driver yet ?
I have I updated to aug windows august update and AMD 18.8.1. works fine |
|
|
|
|
see if -gt or -mi help see read me file.
Does it auto tune first time? There is also a - nvidia command did you use thwt?
|
|
|
|
Showing user a higher hashrate requires basic coding skills. Im not sure if this "miner" even mines lol. Its about %70-90 slower than claymore's dual miner.
go bash and waste your time somewhere else... It shows a very good hashrate, most importantly the pool where one mines shows a great hash rate. You get paid by the post to bash? PM is 3 to 5 %faster than CM... Also less wattage and less crashes than 11.9.... |
|
|
|
Anyone found a consistent fix for the Cuda Error 11? I have 4 Nvidia rigs, 2x 1050 TI rigs and 2x 1070 TI rigs ( all 12 cards each ) and they are identical to eachother, but 1 rig just does not want to mine Eth ( one of the 1070TI's), always gives this error. All identical Windows 10, 32GB page file, Driver 388.71 from December 20th with afterburner 4.5.0. 1070TI's both run identical OC settings. I'm tearing my hairs out because of this one, i am an IT guy and really can't handle not being able to fix this  Are the motherboards all the exact same? Same bios versions? Also take a look at one that could be messing up. Check if using Risers you have the GPUs all firmly seated. I had an issue where once one GPU started acting weird and sure enough it was slightly tilted in riser. GLTU |
|
|
|
I was using -gt 15 for 3 cards (480, 570 and 580) and now autotune found -gt 13,18,16.
Usually it is good idea to put them in the .bat file (or in the config.txt file, if you are using it). In such case you will need to run auto-tune again if you change the clocks on any of the cards, if you install new version of the driver, or if you try using the alternative kernels ( -clkernel 2), as the best -gt values could be very different for the two types of kernels. It is also good idea to check if the -gt values are still the best if you upgrade the GPU drivers or install a new version of PhoenixMiner in the future. However if you are restarting your rigs only once a week or so, you can just let auto-tune run at each startup as it takes only a few minutes. Error fan at 3.0s, how to arrange (1060 card 6g, driver 388.13)
Dear PM I was just wondering what is differnece between Kernels 1(optimized)? and 2(alternative)? Are they specific to any type of GPUs? Thanks |
|
|
|
Hey Im hoping someone can help me out with an "out of memory" error I keep getting. I have a rig with the following build:
8 X NVIDIA 1070s
Asus H270-P motherboard
2X EVGA 750 PSUs
Windows 10
120 GB harddrive
8GB RAM
I am mining with PoenixMiner and using Nanopool and keep getting an error message. (I have 2 other rigs built the exact same and havent had any issues with them). Yesterday it was mining fine and the the program launched out, so I reset the rig and have been having issues since. I was able to get 7 GPUs running before but when I plugged in the 8th card, its giving me an error code. I tried switching out the risers and now am only able to get 6 cards working before the same error occurs -- "CUDA error in CudaProgram.cu:377 : out of memory (2)"
MSI Settings:
Power: 64
Temp: 67
Core Clock: 0
Memory Clock: 585
Any ideas??
I have also 1070 gpus and i using 2x 850W PSU. My MSI OC Settings are: Power 65 Temp 76 Core Clock 0 Memory Clock 710 -> The only exception is one gpu because I had problems with this CUDA error. This gpu have memory clock 650 other settings are same.  try increasing your swap memory to at least 24 gig |
|
|
|
Hello, I have issue with my rx480 mining rig, it runs before perfect, but i ahve to change ssd, and after the new win10 installation, the miner stuck after detecting pools. I use latest win10 ltsb, asrock h81 btco pro r2.0 mobo. Onboard display is selected, and gen1 also. I see my cards at the device manager, also installed the chipset driver, but the miner cannot start. OverdriveNtool also detect my gpus. Change the mobo and the cpu as well, it isnt solve the issue, any idea? I think something missing, but i dont have a clue, out of ideas  i have used various drivers from 18.3.4 to present day 18.5.2 all work well . Can you verify when you installed amd drivers did you do so as admin? |
|
|
|
How important is pcie 3.0 4x bandwidth for this FPGA? Because I use 8 gpu riserless Onda mobos; the only way it'll connect is via m2 key host boards on Pcie 1x lanes.
Unfortunately if you don’t have any place with at least 4x PCIe 2.0 it will be difficult to use in the GPU hybrid role. You would be limited to standalone algorithms. I would like to pre order 1 gig version please. thanks |
|
|
|
After autotuning, should I just put the found values in the bat file, or could it change from run to run?
I was using -gt 15 for 3 cards (480, 570 and 580) and now autotune found -gt 13,18,16.
I would put it in BAT. I notice it can change from run to run but usuually its insignificant. Once done use teh numbers i would say. |
|
|
|
|
