Latest posts of: HASHRA

Show Posts
Pages: « 1 2 [3] 4 5 6 7 »

Alternate cryptocurrencies / Service Discussion (Altcoins) / Re: hashra.com asic scrypt.... scam?

on: April 23, 2014, 06:16:25 PM

Quote from: usao on April 23, 2014, 05:01:27 PM Quote from: dloganbill on April 23, 2014, 04:47:36 PM When is the Hashra Controlla going to be updated to include basics such as failover? LightningAsic's software is looking really promising, but I haven't tried it yet. They are doing auto-overclocking per chip. Very cool stuff. Having the ability to define multiple pools would be nice, if HASHRA can implement such a change. Right now, im experiencing instability in both my Raspberry pi nodes and have updated to the latest image. Seems every few hours the miners go offline and need a hard power cycle to get them back. It's problematic since my miners are at home and im at work all day, so I miss a good portion of daytime mining as a result. As a company, HASHRA is an excellent and reliable company. The only down side is the long-time it takes to ship to the US. It took 2 weeks to get my GSDs from them, about half that in the pre-shipping status internal to HASHRA. Hi Usao Thanks for the feedback. Not sure what version you are on now but the latest version 1.4.0, now has failover support. This can be downloaded at hashra.com/support Obviously they should not be shutting down every few hours, please make sure the "restart" is set to "0". There are obviously a number of reasons as to why this could be happening with your miners, there is a good thread here about the firmware, someone here maybe able to help too: bitcointalk.org/index.php?topic=524770.0 Sorry about any long wait in getting your miners out to you, something we are continuously working on I assure you.

Alternate cryptocurrencies / Service Discussion (Altcoins) / Re: hashra.com asic scrypt.... scam?

on: April 23, 2014, 06:00:11 PM

Quote from: dloganbill on April 23, 2014, 04:47:36 PM When is the Hashra Controlla going to be updated to include basics such as failover? LightningAsic's software is looking really promising, but I haven't tried it yet. They are doing auto-overclocking per chip. Very cool stuff. Failover is available now in the latest version of HASHRA CONTROLA (Now called MINI because we have ATLANTIS and BLADE version coming). Can be downloaded at hashra.com/support

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 23, 2014, 05:17:54 PM

Quote from: compumine on April 22, 2014, 08:40:41 PM HASHRA, I like the new feature on the mini controla that I can add multiple pools. Finnally I don't have to cut/paste all the time. I would like to see you guys add the ability to get some more mining control settings though, like in scripta. The reason is, I like to mine on p2pools and I need to tweak the settings for optimum mining. With scripta it's possible. NOT with Hashra. Another thing is, it would be nice for us to know what you are changing or tweaking in every update so that we could give you feed backs. Still, over 850Mhz is not possible to mine without huge HW and still "some" HW under 850Mhz speeds. Thanks for the input. Were working on it and will take what you said on board, thanks.

Alternate cryptocurrencies / Service Discussion (Altcoins) / Re: hashra.com asic scrypt.... scam?

on: April 23, 2014, 04:41:43 AM

Quote from: klondike_bar on April 22, 2014, 11:42:38 PM they now sell 5MH blades - thoughts? I want to get one but there is not much review of them on the forums recently Hi, I can guarantee you that we do have stock and are shipping as of now : ) As for pricing, we offer free shipping plus a HASHRA BLADE CONTROLA firmware specially designed for Blades. Hope you would consider us : )

Economy / Computer hardware / Re: [SELLING NOW] Gridseed Blade 5 MH/S + ASIC SCRYPT Miner ($1500 + FREE SHIPPING)

on: April 22, 2014, 04:26:39 PM

Quote from: emmettoc on April 22, 2014, 04:13:17 PM I ordered and paid BTC for the blade 2 days ago, but it's not shipped yet and no support response to my message. Was I scammed? Hi! Very sorry for the delay. I have flagged this case as high importance for our shipping staff to follow up. Thank you for your patience for the time being.

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 21, 2014, 05:59:38 PM

Quote from: compumine on April 21, 2014, 05:44:02 PM The SD card I got with my PI is a 16GB. I read that some of you able to use 8GB! Will the new 1.4 fit on an 8GB? What class of cards better to use with PI? New IMG file is 3.88GB, I would suggest to use an 8GB card. Please see this list for details on SD cards best for the Pi. http://elinux.org/RPi_SD_cards

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 21, 2014, 03:35:33 AM

Quote from: nogdog21 on April 21, 2014, 01:27:08 AM Just wanted to say thank you to the Hashra guys and everyone else who helped me narrow down the possible issues with my machines. As it turns out a bad ethernet hub was creating a data collision domain with all the machines. Once removed all was well. Thanks again!! -Andrew Good to hear!

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 20, 2014, 04:06:59 PM

Quote from: bexwhitt on April 20, 2014, 04:01:23 PM what's the root password for 1.4? it's not root, hashra or pi Sorry Bexwhitt but the user and password will not be public for this version. We are working on some features for the future where having the user and password public is just not going to work. Sorry about that.

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 20, 2014, 12:42:07 PM

Please see hashra.com/support to download version 1.4.0 Now called "HASHRA MINI CONTROLA" as we will have a version for BLADE and another for ATLANTIS. "MINI" is what we are now calling the Gridseed "5 Chip Devices".

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 19, 2014, 10:46:32 AM

Quote from: nogdog21 on April 18, 2014, 07:04:11 PM Quote from: HASHRA on April 18, 2014, 06:02:23 PM Quote from: AmDD on April 17, 2014, 11:10:57 PM i know you said you have re-imaged multiple times, but have you used the same image file each time? Maybe thats the issue. Try re-downloading the file and go from there if you havnt already. Spot on… Yes please try this out. Regarding HUBs we suggest to use the most powerful you can get, the 20 port versions we have on our site for the Atlantis is one we get made to order here in Shenzhen… uses 90W power… I am sure there was a stability increase when we started using these. I'm sure someone is selling these on ebay. Could you link me to this exact hub by chance? Thanks! Yes sorry, that would help… http://www.aliexpress.com/item/DHL-Free-Shipping-20-Port-USB-Hub-2-0USB-High-Speed-Industrial-Grade-TF-Card-U/1657611461.html

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 18, 2014, 06:04:22 PM

Quote from: omgitsjoe on April 18, 2014, 04:49:25 PM On the next update could we get the ability to tune individual miners? We made a decision not to go for this for now I'm afraid.

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 18, 2014, 06:02:23 PM

Quote from: AmDD on April 17, 2014, 11:10:57 PM i know you said you have re-imaged multiple times, but have you used the same image file each time? Maybe thats the issue. Try re-downloading the file and go from there if you havnt already. Spot on… Yes please try this out. Regarding HUBs we suggest to use the most powerful you can get, the 20 port versions we have on our site for the Atlantis is one we get made to order here in Shenzhen… uses 90W power… I am sure there was a stability increase when we started using these. I'm sure someone is selling these on ebay.

Economy / Computer hardware / Re: [SELLING NOW] Gridseed Blade 5 MH/S + ASIC SCRYPT Miner ($1500 + FREE SHIPPING)

on: April 17, 2014, 07:25:09 AM

Quote from: w00tcoin on April 17, 2014, 02:57:42 AM I ordered one of these ... can't wait to get it! Thanks : D If you just ordered, should arrive early next week!

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 17, 2014, 04:31:59 AM

Quote from: nogdog21 on April 16, 2014, 09:50:49 PM I wanted to post a picture of the message I am seeing on the GUI when it locks up, this may point to me having received trashy SD cards or possibly a corrupted image file on the cards. I am going to use Apple Pi Baker to re image the SD cards to see if this fixes anything tonight. Yes, think this is wise to do. Make you obviously click update firmware once downloaded to make sure you have the latest version running.

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 16, 2014, 08:24:19 PM

Quote from: nogdog21 on April 16, 2014, 08:00:53 PM Quote from: HASHRA on April 16, 2014, 07:45:49 PM Quote from: nogdog21 on April 16, 2014, 07:24:59 PM Can anyone assist me on this issue? It seems to crash at the point that it is set to autorestart, I guess it just forgets about the restart part... they dont all crash at the same time. I has one crash after 4 hours then 3 crashed at 8 hours then the last one at 12 hours. Very odd and I have not sure where to go from here... any help would be VERY much appreciated. Thanks. How many MINI's you have on the Pi? We suggest 20 in Scrypt.... 10 in Dual mode. I have 20 units on a single Pi. They boot up and all run perfectly fine until the shutdown command gets sent from the GUI and they just don't boot back up it would seem. I'm running them off a 30AMP 360w 12v power brick which I really doubt is an issue as they run flawlessly when they are online... Could the Pi SD card be corrupted? Keep in mind I have 100 units across 5 Pi's and this is happening on all machines so whatever the issue is it would have to apply to everything not just one or two machines. And since they dont all seem to crash at the same intervals the issue gets a bit more convoluted.... Hopefully someone can assist. I really like the Controla interface so I hope that is not the issue. -Andrew 20 units should be fine with Controla at 850 Clock speed. What USB hub you using? sounds alike it could be a hardware issue. Really want to use really good quality powerful HUBs if possible, does make a big difference.

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 16, 2014, 07:45:49 PM

Quote from: nogdog21 on April 16, 2014, 07:24:59 PM Can anyone assist me on this issue? It seems to crash at the point that it is set to autorestart, I guess it just forgets about the restart part... they dont all crash at the same time. I has one crash after 4 hours then 3 crashed at 8 hours then the last one at 12 hours. Very odd and I have not sure where to go from here... any help would be VERY much appreciated. Thanks. How many MINI's you have on the Pi? We suggest 20 in Scrypt.... 10 in Dual mode.

Alternate cryptocurrencies / Mining (Altcoins) / Re: HASHRA - Overall experience and some thoughts

on: April 16, 2014, 07:04:29 PM

Quote from: nikolaz on April 16, 2014, 04:32:07 PM I have to say this wire transfer from UK HSBC to HK HSBC completed and confirmed in my account less than 24 hours... Just looking forward to receiving the blades sometime next week as I my rack is already prepared for them Great news! Thanks for your order with us!

Economy / Computer hardware / [ON SALE NOW] [SHIPPING NOW] $1000 GRIDSEED MINI 10 (3.5MH)

on: April 16, 2014, 06:53:45 PM

GRIDSEED MINI 10 (3.5MH) http://hashra.com/gridseedmini10/ GRIDSEED MINI 10 3.5 MH/S ASIC SCRYPT & DUAL (SHA) MINER INCLUDING 6 PIN PCIE CABLES & HASHRA MINI CONTROLA FIRMWARE ON SD CARD DETAILS: Package includes 10 x GRIDSEED MINI USB Miners. Each GRIDSEED MINI comes with 5 GC3355 55nm Chips offering very low power consumption. Total power usage is approximately 80W for the MINI 10 in Scrypt mode. Each GRIDSEED MINI can produce 350 KH/S in Scrypt Mode Hashing Power in dual/SHA mode is variable using HASHRA MINI CONTROLA firmware, just change BTC cores to how much you want to hash with. Please note when mining in dual mode the power consumption increases. Total hashing power of the MINI 10 when using HASHRA MINI CONTROLA firmware is 3.5 MH/S in Scrypt mode. WHAT IS INCLUDED: 10 x GRIDSEED MINI (USB Miners) 1 x SD CARD ready for Raspberry Pi with HASHRA MINI CONTROLA firmware. 1 x 6 PIN PCIE to 10 x 2.1mm Barrel tip power cable for MINI's. Please note the PCIE cables we give for free are for Scrypt mining only, when in dual mode you will need to use a higher wattage and these cables can only take a maximum of 250W each. WHAT IS NOT INCLUDED: Raspberry Pi with power supply and USB data cable. USB Hub with power supply & 10 USB ports. 10 x USB to Mini USB cables for DATA PSU - We recommend to use a standard PSU unit (With at least 1 x 6 PIN PCIE Connection) of at least 250W. Make sure your PSU also has the switch to turn on and off, some do not come as standard. Ethernet cable for Raspberry Pi to your router. VIDEO: Coming soon... SHIPPING: These are in stock and SHIPPING NOW! We ship out as soon as payment hits our account or you pay with Bitcoin. We are now an official world-wide partner for Gridseed so we can guarantee stock supply, as our facilities are also in Shenzhen where these are produced we can offer super fast delivery times and constant supply of stock. We can ship to anywhere in the world that DHL, EMS or SF Express can deliver to and all shipping is always free. Delivery time in most cases is 3-4 days after it leaves us. This miner ships from Shenzhen China and then through Hong Kong. You are responsible for paying any Tax, VAT, Import duties or fees into your country. We will help you with this and make sure the import is as painless as possible for you. Please note the Miners are marked with a (CE) mark that you can let customs be aware of if they ask. These units are labeled for the shipment as "Computer Hardware, ASIC Processor with Heat-sink and Fan Cooling Unit". Please see hashra.com/shipping for further details. PAYMENT: We accept Bank wire transfer or you can pay with Bitcoin. The Bitcoin price will be calculated at checkout and is valid for 15 mins (Processed by bips.me) When your payment has been cleared and verified our end your order status will change to "Awaiting Fulfilment", this means your payment has been accepted and your order is in process of getting prepared and sent out to you. When your order ships out the status will change to "Awaiting Shipment" and then "Shipped". When your order status changes to "Shipped" you will get a tracking number. Please see hashra.com/payments for further details. WARRANTY: These miners come with a 30 Day Warranty from Gridseed (Any over clocking or hardware mods voids warranty). Due to the dynamic nature of this item returns or refunds are not accepted and all sales are final. We will provide full support to resolve any technical issues you may have and to have the miner repaired or replaced if needed by Gridseed. FURTHER INFO: https://hashra.com/support http://gridseed.com https://github.com/gridseed If you have any questions then please fee free to get in touch at info@hashra.com

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 16, 2014, 03:03:57 PM

Quote from: daddyfatsax on April 16, 2014, 02:27:08 AM Blades shipping now? Looking at getting one. Blades shipping out towards the end of this week... We will make sure everyone gets a copy of the BLADE CONTROLA on an sd card that buys from us, you will also be able to download it though from our website.

Bitcoin / Hardware / Re: HASHRA CONTROLA on Raspberry Pi for Gridseed

on: April 16, 2014, 02:20:35 AM

Quote from: bexwhitt on April 14, 2014, 12:31:53 PM Quote from: HASHRA on April 13, 2014, 04:39:05 PM Quote from: bexwhitt on April 12, 2014, 07:23:01 PM \i don't really want to bother with the importing of the gridseed blade from hashra as after vat and import tax I would be worse of if I got one it would be from minereu.com My point is can you get the hashra controla for the blade in a download anywhere Not sure that's true.... But yes, we'll have the new HASHRA BLADE CONTROLA free to download on our site. In the UK $1500 imported would be plus 2.1% import tax plus 20% VAT which could be around $1840 unless you were very lucky and it got through customs without anybody tagging it Can't see the script only version of the CONTROLA on the hashra site The BLADE CONTROLA will be up on our site by the end of the week, for those that purchase from us will get it pre-loaded on an SD card.

Pages: « 1 2 [3] 4 5 6 7 »