Nice updates, too bad I m on hollidays and I don't have access to my masternode and wallet to do the updates, I hope that my masternode is still active !
Yup, dont worry. Im still on old wallet and al my masternodes are running. I recommend to you update your wallets, because I'm planning add new feature for masternodes and protocol cut is coming. So old wallets will be cut off from staking wallets. You will not get reward. Have you already added the new release on the website? Yes. It have latest version. |
|
|
|
Nice updates, too bad I m on hollidays and I don't have access to my masternode and wallet to do the updates, I hope that my masternode is still active !
Yup, dont worry. Im still on old wallet and al my masternodes are running. I recommend to you update your wallets, because I'm planning add new feature for masternodes and protocol cut is coming. So old wallets will be cut off from staking wallets. You will not get reward. |
|
|
|
Having an issue,
I was trying to send some fund from my masternode wallet, i have coin control active. First thing i notice it that i dont see the 500 on the list but i see all 0.66, when i select the amount i want to send the wallet asks for the password, i input and nothing happens. Why?
When you enter "masternode start", the 500 coin transaction is being disabled in your masternode wallet. It's normal. If you enter "masternode stop" it's appears in inputs list. Mmmm..this is strange, becuase in some wallets i see tht 500 in others i dont, but they are all staking. If you use masternodes with own wallets then it's not normal that they still show it's 500 coins transaction after masternode start. |
|
|
|
|
BTW!
New release: v2.0.4.1
*Mac OS compilation fix
*Boost linux_x64 compile fix
*Removed "Rank" column (no more UI freezes)
*Decreased maximum inputs in stake combine
*New feature in advanced coin control (Lock/Unlock inputs) (Resets after wallet reload)
Please update your PoS wallets.
|
|
|
|
Having an issue,
I was trying to send some fund from my masternode wallet, i have coin control active. First thing i notice it that i dont see the 500 on the list but i see all 0.66, when i select the amount i want to send the wallet asks for the password, i input and nothing happens. Why?
When you enter "masternode start", the 500 coin transaction is being disabled in your masternode wallet. It's normal. If you enter "masternode stop" it's appears in inputs list. |
|
|
|
|
And the next!
New release: v2.0.4.0
*Codebase upgrade and bugfix
Please update your PoS wallets and masternodes.
|
|
|
|
|
Hi everyone!
New release: v2.0.3.8
*Decreased keypool size (from:1000 to 100)
*Fixed wrong calculation for incoming connections.
Please update PoS wallets and masternodes for network stability.
|
|
|
|
Hi. I know that now blockchain have two forks. The one with the most people and the other with connection to yobit wallet. I know that old wallet is extremly bugged and if you lost connection to blockchain it's completely death because wallet can't complete sync blockchain from beginning. I have made fast compiled new wallet for sling that can sync blockchain completely. It's contain many typos but work stable, and have stable staking. I have uploaded new wallet with blockchain database which can connects to the yobit. Download archive, unpack it and run "stake off.cmd" or "stake on.cmd". Then import your private keys from old wallet. //Note Yobit wallet work very slow and is late for ~200 blocks now, because many orphans generated from other blockchain. If we migrates to the yobit blockchain it will normalizes after some time. https://cloud.mail.ru/public/Ayi5/pKrxafXpy |
|
|
|
hi i send crave from my wallet to cryptopia 2 hours ago
is it normal it is not received yet
regards
In your wallet check if your transaction has confirmations. Status: 0/unconfirmed, broadcast through 2 nodes i just found my password from an old wallet  Restart the wallet, the transaction should be rebroadcasted after few minutes. sorry still nothing on cryptopia Status: 0/unconfirmed Enter in debug console "repairwallet" and restart your wallet after scanning. Your coins returns in your wallet. Then send it again. still doesn't want to go thru what wallet version do you have? v1.4.5.0-g32a928e Please, update your wallet. |
|
|
|
hi i send crave from my wallet to cryptopia 2 hours ago
is it normal it is not received yet
regards
In your wallet check if your transaction has confirmations. Status: 0/unconfirmed, broadcast through 2 nodes i just found my password from an old wallet Restart the wallet, the transaction should be rebroadcasted after few minutes. sorry still nothing on cryptopia Status: 0/unconfirmed Enter in debug console "repairwallet" and restart your wallet after scanning. Your coins returns in your wallet. Then send it again. still doesn't want to go thru what wallet version do you have? |
|
|
|
hi i send crave from my wallet to cryptopia 2 hours ago
is it normal it is not received yet
regards
In your wallet check if your transaction has confirmations. Status: 0/unconfirmed, broadcast through 2 nodes i just found my password from an old wallet Restart the wallet, the transaction should be rebroadcasted after few minutes. sorry still nothing on cryptopia Status: 0/unconfirmed Enter in debug console "repairwallet" and restart your wallet after scanning. Your coins returns in your wallet. Then send it again. |
|
|
|
I've had it where I had to start once it twice before staying up. Probably just something weird with the ports, idk.
It's absolutly random, so it's normal)) Thanks, I'll have a look. Last question about rewards. Do you get them constantly? My rewards right now: 0.66666 for node #2 0.66666 for node #1 0.66666 for node #1 Thats all for 3 hours, nothing about node #3 and #4 etc. Seems something is buggy, or it take a while dont know. It's absolutly random, so it's normal)) |
|
|
|
Unfortunately new problems came up.
Started all the nodes with the configuration from Slothman.
Nodes successfully started
Wallet says: "Masternode is Running" for all nodes.
But in the masternode list they are active: 00m:00s
After 30min to 1 hour alle nodes are not in the list anymore.
That's what happens now...
Don't know if this is affected by autolocking wallet?
If so, how to permantentely unlock wallet?
If you use controller wallet for starting masternodes, it needs to be unlocked once for starting remote masternodes. After that remote masternodes will work autonomously and controller wallet do not needed anymore. If your masternodes normaly starts but disappears after some time, check ip:port settings of your masternodes. They must be reachable from internet. Have correct ip and open port. Good to know, checked again my firewall... misstyped something with the rules, phew  now its gonna working fine yay Good))) I think I need to add checking connection to masternodes while starting in controller wallet)) And they are delisted again... I don't know what to do else. There is something wrong.. But what or where... These are my configs now:
Masternode #1 config (started with: ./craved1 -daemon -datadir=/home/mn/.crave)
Masternode #2 config (started with: ./craved2 -daemon -datadir=/home/mn/.crave2)
... and so on
~/.craveX/crave.confrpcuser=user
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=30105
bind=127.0.0.2
bind=vps-ip
externalip=vps-ip
listen=1
server=1
daemon=1
staking=0
logtimestamps=1
port=9999
masternode=1
masternodeaddr=vps-ip:9999
masternodeprivkey=privkey
addnode=173.48.167.209:30104
addnode=107.170.147.51:9999
addnode=81.191.27.5:19914
addnode=195.154.163.121:30104 Other node configs are the same, but: - rpcport gets a higher number (next is: 30106) - bind gets a higher number (next is: 127.0.0.3) - port gets a lower number (next is: 9998) - masternode outputs are fine - masternode keys are fine - masternode conf looking well ufw settings: 9990:9999/tcp ALLOW Anywhere
30100:30120/tcp ALLOW Anywhere
30100:30120/udp ALLOW Anywhere
9990:9999/udp ALLOW Anywhere
9990:9999/tcp (v6) ALLOW Anywhere (v6)
30100:30120/tcp (v6) ALLOW Anywhere (v6)
30100:30120/udp (v6) ALLOW Anywhere (v6)
9990:9999/udp (v6) ALLOW Anywhere (v6) I run them on a 1 GB Ram Ubuntu 16.04 VPS with 4 GB Swap File, Does it need more ram or should this be fine? You use ipv4 or ipv6 address? |
|
|
|
Unfortunately new problems came up.
Started all the nodes with the configuration from Slothman.
Nodes successfully started
Wallet says: "Masternode is Running" for all nodes.
But in the masternode list they are active: 00m:00s
After 30min to 1 hour alle nodes are not in the list anymore.
That's what happens now...
Don't know if this is affected by autolocking wallet?
If so, how to permantentely unlock wallet?
If you use controller wallet for starting masternodes, it needs to be unlocked once for starting remote masternodes. After that remote masternodes will work autonomously and controller wallet do not needed anymore. If your masternodes normaly starts but disappears after some time, check ip:port settings of your masternodes. They must be reachable from internet. Have correct ip and open port. Good to know, checked again my firewall... misstyped something with the rules, phew now its gonna working fine yay Good))) I think I need to add checking connection to masternodes while starting in controller wallet)) |
|
|
|
Unfortunately new problems came up.
Started all the nodes with the configuration from Slothman.
Nodes successfully started
Wallet says: "Masternode is Running" for all nodes.
But in the masternode list they are active: 00m:00s
After 30min to 1 hour alle nodes are not in the list anymore.
That's what happens now...
Don't know if this is affected by autolocking wallet?
If so, how to permantentely unlock wallet?
If you use controller wallet for starting masternodes, it needs to be unlocked once for starting remote masternodes. After that remote masternodes will work autonomously and controller wallet do not needed anymore. If your masternodes normaly starts but disappears after some time, check ip:port settings of your masternodes. They must be reachable from internet. Have correct ip and open port. |
|
|
|
|
Hello everybody!
New release: v2.0.3.7
*New new commandline option for wallet database "-dbwalletcache"
Give you control of wallet database cache. By default cache database reduced to 1Mb.
*Blockchain database cache decreased to 10Mb by default
*New build option for more memory usage optimization
For masternode holders. I have added new buildoption "LOWMEM" (disabled by default). If enabled, usage of memory can be reduced by an additional 37Mb (from ~315Mb to ~277Mb with default database caches). But it brokes compatibility with blockchain database and you will need to resync database. The choice yours.
Recommended for masternode holders. Update your wallets.
|
|
|
|
Im skeptical about ICM gone tbh...  he was a genius...one of the most impressive devs i ever came across, its a shame he couldnt be honest  crave couldve easily been a top 50 coin today worth $50mill+ also the biggest reason for craves downfall , was the MN pools.. to many people gave sologap and a few others trust and coins for MN, they stole the coins and dumped them everyday then along came the fud and the dev ran off, it got delisted from trex and then cryptsy stole alot of crave coins...fun times lol (sarcasm, those days it was tough) (i lost cravecoins to the dev..i donated lol, i lost crave coins on blur..i burnt them ..lol...i lost crave coins on cryptsy they got stolen lol) now , i still got crave...alot of em, stored in a few places... i used to crave pos alot, as my old screenshots can confirm i might start pos with them again im def not buying any crave, no chance lol gd luck on this venture... the only warning i can give you all is...DO NOT GIVE ANY COINS TO ANYONE if you cant set up a mn , go pos, its simple and easy and you have your coins If you can to start PoS then start it ) |
|
|
|
I need an explanation, i have 5 nodes on 1 server, all configured right and working, the first 24hrs i got approx 2 coins per node. Now they been up 48hrs and in the second 24hrs i only got 2 transactions of 0.66 only on one node, i see on the masternode list that my nodes are all online. Is this normal to see nothing the following day?
sure its normal, more masternodes in the network must share the same amount of blockreward. Correct, but the other day they were 202 and now 165, so something is not right Yes, it's not normal. But it happens because some nodes created wrong. They are announced in network but disappears after checking by other nodes. The main error why they working wrong is closed port. Masternode ip:port must be reachable from internet. I have made an protection from unworking nodes. Now staking wallet check masternode while adding it to list and wallet exclude bad masternodes from payment list. Those masternodes never recieve reward. |
|
|
|
|
Hi everyone!
New release: v2.0.3.6
*Fix network troubles after checking masternodes
Now bad masternodes will be listed, but with unactive status. This nodes will be excluded from the payout list.
Update your PoS wallets. Masternodes don't need this update.
|
|
|
|
|
Show Posts
