Who can help me with, how to change the drive from wallet to where i want the blockchain to sync...from C: to drive D: ....kind regards

yea, i was workin with xvg to...now xvg is fucked up too... :/ I cant switch to nothing...i abendoned digibyte....the price is just ridicules

What is going on with the sudden myr-groestl network difficulty, it was always between 5000-9000 , now its 22000 to 64000 ...what's up with that? Are there some new myr-groestl Asic's? Or some new batch of Asic's for diffrent algos affecting the overall network? I think the network from every diffrent algo was affected by some procentage of the other networks or something like that? Am i right?

I dont understand the sudden interest in mining digibyte with myr-groestl algorithm ...the network diff went up from 5000-9000 to wooping 26000-64000 ..what's up with that?

Try raising the voltage a bit, or downclocking the memory......amd has driver issus's for older cards, even with cars such as 7970(special one's, with custom onboard h/w controllers)....sometimes they freeze for no appperent reason.....it is something to do with the memory controller/software control....It is not fixed in ages.

Aurora Coin myr-groestl pool is down for couple of days? Because i dont see any hashrate on the pool...is it an error on the web-site?

Mr. Claymore , pls implement nvidia in the miner. See the EWBF's code is kind a porn , utilize with yours, Kind regards Ivo

7970 is doing fine with sgminer 5.1.1. - 35 mh/s ....but my R9 290X is bonkers, only 40-42 mh/s is very low :/ Can someone help, pls send me a kernel or bin so i can make it work...I've tryied ghostlenders myriad-groestl.cl ...still 7970 - 35 mh/s and R9 290X - 40-42 mh/s :/ If someone needs work with video editing, i can make it happen....privat message me, Kind Regards Ivo Icevski

@Socket54 , i think you are having problem with the power draw...check cables and everything....if you elemenate all problems with cabling, try mesuaring inside you PSU, capacitors etc with multimeter

@CharNoir , try with significant downclock on the memory of the problematic card, or maybe slight downclock, you can check what are the best settings after a while...for exemple, my 7970 is stable on 1300 Mhz (patched bios) , but sometimes i can run for hours with 1315 Mhz....

Why no one mines on this pool? https://zecmine.pro  ? It has 0% fee ...i'm currently mining on https://zclmine.pro and it is super fast and adorable profit. But, we have to work out zec pool, only 2 miners :/

VOTES for v 12.5

Yeap, this is true...the new version atributes better with core then memory

Also, I think suprnova's pool is better then flypool's....

i think etherion is a troll...he is purposely doing this....is there a moderator to give him a warning?

I'm getting 330 h/s in 12.4 with modded 7970

12.4 version for the win...you just have to figure it out....ive tested 12.2 and 12.0 ....nothing beats 12.4....im using moded 7970 and 290X ....290X is always on default because i'm having heat issues..it is in my case...but 7970 is doing fine, 1300-1325 on the memory ...and 1125 on the core....The problem with the 12.4 is that it is way to much optimized actually thus is more power hungry...and memory intensive ...that's why you are having stability issues ....you must check ur psu cabling, ur PSU stability....in one word general system stability.  12.0 and 12.2 are more lightly on the system and thats why in general you are thinkig that you are having better results....but, if all is good, 12.4 is the best version. Trust me, i too was having problems at the beginning...done some re-flashing on the bios(es), changing volts on the gpus...frequencys....in the end i found that 7970 works better with 1325 max on memory frequency.....also modded 290X is having problems with higher freq on memory and high -intensity at the same time....back down the intensity settings...i find it -i5 and -6 works ok with 7970 ....for 290X -6 , -7 and -9 (if i'm not on my pc)

Etherion, can you tell me the specs of your system? what cards are the firts 5? from GPU0 to GPU4 ? are they 7970/280x? ...also the last three, are they R9 290X/390X ? I can guess, if you are using 15.12 drivers.....for 7970/280X best intensity is 6 ....tryed with 7 , they do better job with -i 6 , so you wanna do that ....set -i 9 for the faster cards, and -6 for the slower one's ...
If u think it is a bug with the miner, then dont use , -tt , tstop, -di , -a and -r 1 commands....you don't need them basicaly. If you want to control the temp, just set it in the drivers control panel , SET 87 Celsius max temperature for all cards. Also, there is auto restart whatch dog auto command build in the miner if something is wrong with the cards or system, the miner restars itself.  
Pls do tell the specs of yout system, i'm very curios if you are using all 8 cards on 1 PSU ...Last summer/fall i was having touble with old Cooler Master Vaunguard 850W (seasonic tier 1 psu) , with just one moded and overclocked 7970,  290X (default) and overclocked Q9550 .....Every single connector had fryed :/ literary, pci-e, sata's and cpu connectors,every single one of them, on both ends  PSU-GPU vice versa although the 290X connectors are fine, the 7970 ones i had to replaced them ...... I had to replaced 6 or 7 capacitors in order to fix the PSU and came back in life
In my personal opinion, u should check entire system, cables, stability of the system....i dont think you have a stable system there...

Cards with lower Asics have VRM's that signals higher voltage then cards with higher asics. Cards with higher asics their VRM signals lower voltage, so lowering the voltage do tend to make problems. So that is why, cards with lower asics works better with undervolting Cant' explain better then this in layman's terms

- But, all summed up, the total power consumption is equivalent in both cases, wheter you think that the card with lower asic can be undervolt lower....basically you get the same result as the cards with higher asics, ...in the end, the power consumption is the same.

dwarwpool is so fast, lets make it great pool, it needs more workers. It does not need ssl/tlc connection btw...you dont need to worry about 2.5 dev fee

You can always modify the bios with Polaris bios editor....raise the throtling temp, it has very simple user interface, you can done it by without asking for help if you have general knowledge for Computer's.