Halledebildiğine çok sevindim bol kazançlar şimdiden

Yararli olduysa ne mutlu bana 😃

Derin hayallere daldirdi herkesi )

Merhaba,

Özel Mesaj yolu ile bilgileri aldım ancak diğer arkadaşlarada yardımcı olması adına buradan yazayım

Öncelikle Betarigs üzerinden  "Rig" lerinizi olusturun.( Oluşturduğunuz ilk rig için 2 adet s3 kullanağınızı var sayıyorum)

Size verdiği kod içindeki sizi ilgilendiren kısım "cgminer -o stratum+tcp://xxxx.xxxx.rigs.eu.betarigs.com:xxxxxx -u xxxxxx-xxxxx -p x" bunları s3ün  miner config menusu altındaki pool1-pool1 worker-pool1 password kısımlarına resimdeki gibi ekliyoruz (2 adet olduğu için 2 s3ede aynı bilgileri giriyoruz 10 adet olsaydı 10 s3de aynı bilgileri girecektik)

Pool1                        stratum+tcp://xxxx.xxxx.rigs.eu.betarigs.com:xxxxxx
pool1 worker              xxxxxx-xxxxx
poo1 password           x



pool2 ve 3 kısımlarına kendi mining pool bilgilerinizi girin  (resimde benimkiler açıkça gözüküyor belki benim için kazı yapmak isteyen olur )

Bu işlem bittikten sonra  "Save & Apply" diyip bekliyoruz.

Yükleme bittikten sonra betarigs üzerinden kontrol edin kiralanmaya hazır olması gerekli artık

 "Miner Status" kısmına geçiyoruz eğer betarigs üzerinden rig kiralanmışsa resimdeki gibi bir görüntü oluyor




Takıldığınız biryer olursa eger tekrar yardımcı olabilirim

Merhaba,

Elinde olan varsa almak istiyorum iletişime geçebilirse çok memnun olurum

2 adet antminer s3 ile gnash.ioda kazıyorum birkaçgün geçtikten sonra sonuçları paylaşabilirim verimlilik ve getiri ile ilgili olarak.  Ama sunu söyleyebilirimki tamamen sans meselese aynı zamanda ordan GHS aldım 3 gunde 0.01800000 BTC kazdım sonraki 4 gunde0.01500000 BTC  blokların bulunma hızından kaynaklı sanırım

Arkadaşlar merhaba hepinize çok teşekkür ederim sıkıntıyı çözdün iplere gerekli çıkış izinlerini vermemişiz

o sekilde düzelttim reboot ettim ancak durum hala aynı değişen birşey yok

yerel ağ üzerinde çalışıyor ve 192.168.1.99 ipden girebiliyorum acaba suanda ikiside şirkette sistem odasında kurulu şirketin firewallundan kaynaklı bir sorun olabilirmi onu nasıl anlarız

evet aynı

@hosunn hala aynı durumda malesef internet bağlantısında bir sorun olabilir mi acaba

http://hizliresim.com/aPpVW2


http://hizliresim.com/Z2pvJZ


istediğiniz biryerin resmi varsa onuda paylaşabilirim

system log:
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.000000] Memory: 61336k/65536k available (2187k kernel code, 4200k reserved, 588k data, 232k init, 0k highmem)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.080000] pid_max: default: 32768 minimum: 301
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.080000] Mount-cache hash table entries: 512
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.090000] NET: Registered protocol family 16
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.100000] MIPS: machine is TP-LINK TL-WR741ND v4
Thu Jan  1 02:00:11 1970 kern.warn kernel: [    0.100000] MAC FF:FF:FF:FF:FF:FF
Thu Jan  1 02:00:11 1970 kern.warn kernel: [    0.100000] MAC 20:59:a0:c5:4c:68
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.560000] bio: create slab <bio-0> at 0
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.560000] Switching to clocksource MIPS
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.570000] NET: Registered protocol family 2
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.580000] TCP: Hash tables configured (established 512 bind 512)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.590000] TCP: reno registered
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.610000] NET: Registered protocol family 1
Thu Jan  1 02:00:11 1970 kern.debug kernel: [    0.610000] PCI: CLS 0 bytes, default 32
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.640000] msgmni has been set to 119
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.650000] io scheduler noop registered
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.650000] io scheduler deadline registered (default)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.670000] console [ttyATH0] enabled, bootconsole disabled
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
Thu Jan  1 02:00:11 1970 kern.warn kernel: [    0.690000] m25p80 spi0.0: found gd25q64, expected m25p80
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.690000] m25p80 spi0.0: gd25q64 (8192 Kbytes)
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.700000] 5 tp-link partitions found on MTD device spi0.0
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.700000] Creating 5 MTD partitions on "spi0.0":
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.710000] 0x000000000000-0x000000020000 : "u-boot"
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.710000] 0x000000020000-0x000000117db8 : "kernel"
Thu Jan  1 02:00:11 1970 kern.warn kernel: [    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.730000] 0x000000117db8-0x0000007f0000 : "rootfs"
Thu Jan  1 02:00:11 1970 kern.warn kernel: [    0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.750000] mtd: partition "rootfs" set to be root filesystem
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.750000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.760000] 0x000000370000-0x0000007f0000 : "rootfs_data"
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.770000] 0x000000020000-0x0000007f0000 : "firmware"
Thu Jan  1 02:00:11 1970 kern.notice kernel: [    0.770000] 0x0000007f0000-0x000000800000 : "art"
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.790000] libphy: ag71xx_mdio: probed
Thu Jan  1 02:00:11 1970 kern.info kernel: [    0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Thu Jan  1 02:00:11 1970 kern.info kernel: [    1.350000] eth0: Found an AR7240/AR9330 built-in switch
Thu Jan  1 02:00:11 1970 kern.info kernel: [    2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Thu Jan  1 02:00:11 1970 kern.info kernel: [    2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Thu Jan  1 02:00:11 1970 kern.info kernel: [    2.950000] TCP: cubic registered
Thu Jan  1 02:00:11 1970 kern.info kernel: [    2.950000] NET: Registered protocol family 17
Thu Jan  1 02:00:11 1970 kern.info kernel: [    2.960000] 8021q: 802.1Q VLAN Support v1.8
Thu Jan  1 02:00:11 1970 kern.info kernel: [    2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Jan  1 02:00:11 1970 kern.info kernel: [    2.980000] Freeing unused kernel memory: 232K (80316000 - 80350000)
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.740000] usbcore: registered new interface driver usbfs
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.740000] usbcore: registered new interface driver hub
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.750000] usbcore: registered new device driver usb
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.760000] usbcore: registered new interface driver bitmain
Thu Jan  1 02:00:11 1970 kern.warn kernel: [    5.760000] hash ok
Thu Jan  1 02:00:11 1970 kern.warn kernel: [    5.760000] hashtest OK
Thu Jan  1 02:00:11 1970 kern.err kernel: [    5.770000] bitmain-asic: success to register device
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.770000] usbcore: registered new interface driver bitmainbl
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.790000] ehci-platform: EHCI generic platform driver
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.790000] ehci-platform ehci-platform: EHCI Host Controller
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.800000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.830000] hub 1-0:1.0: USB hub found
Thu Jan  1 02:00:11 1970 kern.info kernel: [    5.830000] hub 1-0:1.0: 1 port detected
Thu Jan  1 02:00:11 1970 kern.info kernel: [    6.170000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Thu Jan  1 02:00:11 1970 kern.info kernel: [    6.320000] hub 1-1:1.0: USB hub found
Thu Jan  1 02:00:11 1970 kern.info kernel: [    6.320000] hub 1-1:1.0: 2 ports detected
Thu Jan  1 02:00:11 1970 kern.info kernel: [    6.610000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
Thu Jan  1 02:00:11 1970 kern.info kernel: [    6.740000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
Thu Jan  1 02:00:11 1970 kern.warn kernel: [    6.750000] PIC microchip usb OK
Thu Jan  1 02:00:11 1970 kern.notice kernel: [   10.510000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 19 of xref (0 dead, 4 orphan) found.
Tue Aug 19 18:32:00 2014 daemon.info sysinit: Tue Aug 19 15:32:00 UTC 2014
Tue Aug 19 18:32:00 2014 user.emerg syslog: kmodloader: loading kernel modules from /etc/modules.d/**
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.050000] hidraw: raw HID events driver (C) Jiri Kosina
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.060000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.060000] Backport generated by backports.git backports-20130617-4-ge3220f5
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.080000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.100000] usbcore: registered new interface driver usbhid
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.110000] usbhid: USB HID core driver
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.120000] usbcore: registered new interface driver usbserial
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.120000] usbcore: registered new interface driver usbserial_generic
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.130000] usbserial: USB Serial support registered for generic
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.160000] xt_time: kernel timezone is -0000
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.180000] cfg80211: Calling CRDA to update world regulatory domain
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.180000] cfg80211: World regulatory domain updated:
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.190000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.200000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.210000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.210000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.220000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.230000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.240000] ip_tables: (C) 2000-2006 Netfilter Core Team
Tue Aug 19 18:32:00 2014 kern.debug kernel: [   13.390000] ath: EEPROM regdomain: 0x0
Tue Aug 19 18:32:00 2014 kern.debug kernel: [   13.390000] ath: EEPROM indicates default country code should be used
Tue Aug 19 18:32:00 2014 kern.debug kernel: [   13.390000] ath: doing EEPROM country->regdmn map search
Tue Aug 19 18:32:00 2014 kern.debug kernel: [   13.390000] ath: country maps to regdmn code: 0x3a
Tue Aug 19 18:32:00 2014 kern.debug kernel: [   13.390000] ath: Country alpha2 being used: US
Tue Aug 19 18:32:00 2014 kern.debug kernel: [   13.390000] ath: Regpair used: 0x3a
Tue Aug 19 18:32:00 2014 kern.debug kernel: [   13.390000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.400000] cfg80211: Calling CRDA for country: US
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.410000] cfg80211: Regulatory domain changed to country: US
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.410000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.420000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.430000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.430000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.440000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.450000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.460000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Tue Aug 19 18:32:00 2014 kern.info kernel: [   13.470000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Tue Aug 19 18:32:00 2014 user.info syslog: ran 16 iterations
Tue Aug 19 18:32:00 2014 daemon.info sysinit: kmod: ran 16 iterations
Tue Aug 19 18:32:04 2014 cron.info crond[575]: crond: crond (busybox 1.19.4) started, log level 8
Tue Aug 19 18:32:05 2014 authpriv.info dropbear[586]: Not backgrounding
Tue Aug 19 18:32:05 2014 daemon.notice netifd: Interface 'loopback' is now up
Tue Aug 19 18:32:05 2014 kern.info kernel: [   18.470000] device eth0 entered promiscuous mode
Tue Aug 19 18:32:05 2014 daemon.notice netifd: Interface 'wan' is now up
Tue Aug 19 18:32:06 2014 daemon.notice netifd: lan (632): udhcpc (v1.19.4) started
Tue Aug 19 18:32:06 2014 daemon.notice netifd: lan (632): Sending discover...
Tue Aug 19 18:32:06 2014 user.notice firewall: Reloading firewall due to ifup of wan (eth1)
Tue Aug 19 18:32:08 2014 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Aug 19 18:32:08 2014 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Aug 19 18:32:08 2014 daemon.info sysinit: /etc/config/miner_pic.hex
Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: started, version 2.66 cachesize 150
Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: using local addresses only for domain lan
Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: reading /tmp/resolv.conf.auto
Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: using nameserver 192.168.1.1#53
Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: using local addresses only for domain lan
Tue Aug 19 18:32:09 2014 daemon.info dnsmasq[694]: read /etc/hosts - 1 addresses
Tue Aug 19 18:32:09 2014 kern.info kernel: [   21.940000] usb 1-1.1: USB disconnect, device number 3
Tue Aug 19 18:32:09 2014 kern.info kernel: [   21.960000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Tue Aug 19 18:32:09 2014 kern.info kernel: [   22.230000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
Tue Aug 19 18:32:09 2014 kern.info kernel: [   22.370000] bitmainbl 1-1.1:1.0: USB Bitmain bootloader device now attached to USB Bitmain bootloader-0
Tue Aug 19 18:32:09 2014 kern.warn kernel: [   22.380000] PIC microchip bootloader usb OK
Tue Aug 19 18:32:09 2014 daemon.notice netifd: lan (632): Sending discover...
Tue Aug 19 18:32:10 2014 kern.info kernel: [   23.060000] eth1: link up (100Mbps/Full duplex)
Tue Aug 19 18:32:12 2014 daemon.notice netifd: lan (632): Sending discover...
Tue Aug 19 18:32:19 2014 kern.warn kernel: [   31.740000] no int in filled
Tue Aug 19 18:32:19 2014 daemon.info sysinit: pic update
Tue Aug 19 18:32:19 2014 daemon.info sysinit: open /dev/bitmain0 to restart pic
Tue Aug 19 18:32:19 2014 daemon.info sysinit: open /dev/bitmainbl0 ok fd = 0x4
Tue Aug 19 18:32:19 2014 daemon.info sysinit: read data
Tue Aug 19 18:32:19 2014 daemon.info sysinit:

• {0x1}, [1]{0x10}, [2]{0x1}, [3]{0x10}, [4]{0x1}, [5]{0}, [6]{0x10}, [7]{0x1}, [8]{0x10}, [9]{0x4}, [10]{0x4},

Tue Aug 19 18:32:19 2014 daemon.info sysinit: Version 1.0
Tue Aug 19 18:32:19 2014 daemon.info sysinit: open pic update file fail
Tue Aug 19 18:32:19 2014 daemon.info sysinit: Control bootloader to app
Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led WAN
Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led WANL
Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led LAN1
Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led LAN2
Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led LAN3
Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led LAN4
Tue Aug 19 18:32:19 2014 daemon.info sysinit: setting up led WLAN
Tue Aug 19 18:32:20 2014 kern.info kernel: [   33.230000] usb 1-1.1: USB disconnect, device number 4
Tue Aug 19 18:32:20 2014 kern.info kernel: [   33.240000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Tue Aug 19 18:32:20 2014 kern.info kernel: [   33.690000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform
Tue Aug 19 18:32:21 2014 kern.info kernel: [   33.830000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
Tue Aug 19 18:32:21 2014 kern.warn kernel: [   33.840000] PIC microchip usb OK
Tue Aug 19 18:32:23 2014 daemon.info sysinit: --bitmain-options 115200:32:8:18:218.75:1106 -o -o stratum+tcp://uk1.ghash.io:3333 -O batido.worker2:123 -o -o stratum+tcp://uk1.ghash.io:3333 -O batido.worker2:123 -o -o stratum+tcp://uk1.ghash.io:3333 -O batido.worker2:123 --api-listen --api-network --bitmain-checkn2diff --bitmain-hwerror --queue 4096
Tue Aug 19 18:32:23 2014 daemon.info sysinit: - init complete -
Tue Aug 19 18:33:01 2014 cron.info crond[575]: crond: USER root pid 892 cmd /usr/bin/cgminer-monitor
Tue Aug 19 18:33:02 2014 kern.info kernel: [   75.160000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
Tue Aug 19 18:36:01 2014 cron.info crond[575]: crond: USER root pid 955 cmd /usr/bin/cgminer-monitor
Tue Aug 19 18:39:01 2014 cron.info crond[575]: crond: USER root pid 1151 cmd /usr/bin/cgminer-monitor
Tue Aug 19 18:42:01 2014 cron.info crond[575]: crond: USER root pid 5286 cmd /usr/bin/cgminer-monitor
Tue Aug 19 18:45:01 2014 cron.info crond[575]: crond: USER root pid 6838 cmd /usr/bin/cgminer-monitor
Tue Aug 19 18:48:01 2014 cron.info crond[575]: crond: USER root pid 6979 cmd /usr/bin/cgminer-monitor
Tue Aug 19 18:51:01 2014 cron.info crond[575]: crond: USER root pid 7083 cmd /usr/bin/cgminer-monitor
Tue Aug 19 18:54:01 2014 cron.info crond[575]: crond: USER root pid 7105 cmd /usr/bin/cgminer-monitor
Tue Aug 19 18:57:01 2014 cron.info crond[575]: crond: USER root pid 7127 cmd /usr/bin/cgminer-monitor
Tue Aug 19 19:00:01 2014 cron.info crond[575]: crond: USER root pid 7149 cmd /usr/bin/cgminer-monitor
Tue Aug 19 19:03:01 2014 cron.info crond[575]: crond: USER root pid 7171 cmd /usr/bin/cgminer-monitor
Tue Aug 19 19:06:01 2014 cron.info crond[575]: crond: USER root pid 7193 cmd /usr/bin/cgminer-monitor
Tue Aug 19 19:09:01 2014 cron.info crond[575]: crond: USER root pid 7215 cmd /usr/bin/cgminer-monitor
Tue Aug 19 19:12:01 2014 cron.info crond[575]: crond: USER root pid 7237 cmd /usr/bin/cgminer-monitor


kernel log:
[    0.000000] Linux version 3.10.12 (xxl@ubuntu) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38031) ) #140 Mon Jul 21 17:27:04 CST 2014
[    0.000000] MyLoader: sysp=1bec2fee, boardp=fdd6ef6f, parts=fc031564
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000] free_area_init_node: node 0, pgdat 803005b0, node_mem_map 81000000
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61336k/65536k available (2187k kernel code, 4200k reserved, 588k data, 232k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is TP-LINK TL-WR741ND v4
[    0.100000] MAC FF:FF:FF:FF:FF:FF
[    0.100000] MAC 20:59:a0:c5:4c:68
[    0.560000] bio: create slab <bio-0> at 0
[    0.560000] Switching to clocksource MIPS
[    0.570000] NET: Registered protocol family 2
[    0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.580000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.580000] TCP: Hash tables configured (established 512 bind 512)
[    0.590000] TCP: reno registered
[    0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.610000] NET: Registered protocol family 1
[    0.610000] PCI: CLS 0 bytes, default 32
[    0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.640000] msgmni has been set to 119
[    0.650000] io scheduler noop registered
[    0.650000] io scheduler deadline registered (default)
[    0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.670000] console [ttyATH0] enabled, bootconsole disabled
[    0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[    0.690000] m25p80 spi0.0: found gd25q64, expected m25p80
[    0.690000] m25p80 spi0.0: gd25q64 (8192 Kbytes)
[    0.700000] 5 tp-link partitions found on MTD device spi0.0
[    0.700000] Creating 5 MTD partitions on "spi0.0":
[    0.710000] 0x000000000000-0x000000020000 : "u-boot"
[    0.710000] 0x000000020000-0x000000117db8 : "kernel"
[    0.720000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.730000] 0x000000117db8-0x0000007f0000 : "rootfs"
[    0.730000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.750000] mtd: partition "rootfs" set to be root filesystem
[    0.750000] mtd: partition "rootfs_data" created automatically, ofs=0x370000, len=0x480000
[    0.760000] 0x000000370000-0x0000007f0000 : "rootfs_data"
[    0.770000] 0x000000020000-0x0000007f0000 : "firmware"
[    0.770000] 0x0000007f0000-0x000000800000 : "art"
[    0.790000] libphy: ag71xx_mdio: probed
[    0.800000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[    1.350000] eth0: Found an AR7240/AR9330 built-in switch
[    2.390000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[    2.940000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    2.950000] TCP: cubic registered
[    2.950000] NET: Registered protocol family 17
[    2.960000] 8021q: 802.1Q VLAN Support v1.8
[    2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.980000] Freeing unused kernel memory: 232K (80316000 - 80350000)
[    5.740000] usbcore: registered new interface driver usbfs
[    5.740000] usbcore: registered new interface driver hub
[    5.750000] usbcore: registered new device driver usb
[    5.760000] usbcore: registered new interface driver bitmain
[    5.760000] hash ok
[    5.760000] hashtest OK
[    5.770000] bitmain-asic: success to register device
[    5.770000] usbcore: registered new interface driver bitmainbl
[    5.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.790000] ehci-platform: EHCI generic platform driver
[    5.790000] ehci-platform ehci-platform: EHCI Host Controller
[    5.800000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    5.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    5.830000] hub 1-0:1.0: USB hub found
[    5.830000] hub 1-0:1.0: 1 port detected
[    6.170000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.320000] hub 1-1:1.0: USB hub found
[    6.320000] hub 1-1:1.0: 2 ports detected
[    6.610000] usb 1-1.1: new full-speed USB device number 3 using ehci-platform
[    6.740000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[    6.750000] PIC microchip usb OK
[   10.510000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 19 of xref (0 dead, 4 orphan) found.
[   13.050000] hidraw: raw HID events driver (C) Jiri Kosina
[   13.060000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
[   13.060000] Backport generated by backports.git backports-20130617-4-ge3220f5
[   13.080000] nf_conntrack version 0.5.0 (962 buckets, 3848 max)
[   13.100000] usbcore: registered new interface driver usbhid
[   13.110000] usbhid: USB HID core driver
[   13.120000] usbcore: registered new interface driver usbserial
[   13.120000] usbcore: registered new interface driver usbserial_generic
[   13.130000] usbserial: USB Serial support registered for generic
[   13.160000] xt_time: kernel timezone is -0000
[   13.180000] cfg80211: Calling CRDA to update world regulatory domain
[   13.180000] cfg80211: World regulatory domain updated:
[   13.190000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.200000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.210000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.210000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.220000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.230000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.240000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   13.390000] ath: EEPROM regdomain: 0x0
[   13.390000] ath: EEPROM indicates default country code should be used
[   13.390000] ath: doing EEPROM country->regdmn map search
[   13.390000] ath: country maps to regdmn code: 0x3a
[   13.390000] ath: Country alpha2 being used: US
[   13.390000] ath: Regpair used: 0x3a
[   13.390000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.400000] cfg80211: Calling CRDA for country: US
[   13.410000] cfg80211: Regulatory domain changed to country: US
[   13.410000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.420000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   13.430000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[   13.430000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.440000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.450000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.460000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   13.470000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   18.470000] device eth0 entered promiscuous mode
[   21.940000] usb 1-1.1: USB disconnect, device number 3
[   21.960000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[   22.230000] usb 1-1.1: new full-speed USB device number 4 using ehci-platform
[   22.370000] bitmainbl 1-1.1:1.0: USB Bitmain bootloader device now attached to USB Bitmain bootloader-0
[   22.380000] PIC microchip bootloader usb OK
[   23.060000] eth1: link up (100Mbps/Full duplex)
[   31.740000] no int in filled
[   33.230000] usb 1-1.1: USB disconnect, device number 4
[   33.240000] bitmainbl 1-1.1:1.0: USB Bitmain asic #0 now disconnected
[   33.690000] usb 1-1.1: new full-speed USB device number 5 using ehci-platform
[   33.830000] bitmain 1-1.1:1.0: USB Bitmain asic device now attached to USB Bitmain asic-0
[   33.840000] PIC microchip usb OK
[   75.160000] bitmain 1-1.1:1.0: USB Bitmain asic #0 now disconnected

btcguild denedim olmadı
ghash.io denedim olmadı
bitminter denedim olmadı

hash alamıyorum miner status kısmında "This section contains no values yet" yazıyor sadece her bolumde biryerleri yanlış yapıyorum sanırım ama nereyi çözemedim.

Merhaba,

2 adet Antminer S3 aldım ve kurdum ancak kazı yapamıyorum sorun nereden kaynaklı olabilir acaba bilgisi olan varmı?

Pool bilgilerini giriyorum ancak miner status kısmında hiç hareket yok