If the 3060ti only consumes around 120-150w undervolted do you guys think it's safe to use this?
A Molex plug is specified to handle less than 150w passing through it, and a typical cable has 3-4 of these, with the plug closest to the psu end of the cable having the full load connected on the cable passing through it. Theoretically possible if you connect a single molex plug each from two different cables (and have nothing ele connected to them) to the molex to pcie connector. But, the molex to pcie connector like the one you linked above have poor construction and below gague wires and are very likely to melt/burn under a sustained load of over 80w.
|
|
|
or 3.00 for nvidia 3060ti. I could roi this card in under 165 days
Phil you gotta change your ROI calc to account for the residual value of the card itself, lets say it drops 20% in value in the first 6 months, its still worth $300+ so your actual ROI is less than 37 days. Now if only I could find any in stock ...
|
|
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Ftn5aHrP.jpg&t=663&c=k_5Q8phGPCi5yg) Currently offering bare-bones riserless setups (In Bangalore ONLY): ONDA B250 D8P Riserless Motherboard - 8GPU support Intel G3900/G4400 CPU DDR4 4GB 64GB Msata SSD (SimpleMining OS Pre-Installed) PSU - 1200/1300W Platinum PSU Total Price 65k. Pm if interested. Also available : (Used) H81/B85/B250 Mining Motherboard - 6 GPU 6 GPU RIsers with cables Intel G3900/G4400 CPU DDR4 4GB 64GB SSD 1000W Gold Corsair PSU Total Price 35k. Pm if interested.
|
|
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Ftn5aHrP.jpg&t=663&c=k_5Q8phGPCi5yg) Currently offering bare-bones riserless setups (In Bangalore ONLY): ONDA B250 D8P Riserless Motherboard - 8GPU support Intel G3900/G4400 CPU DDR4 4GB 64GB Msata SSD (SimpleMining OS Pre-Installed) PSU - 1200/1300W Platinum PSU Total Price 65k. Pm if interested. Also available : (Used) H81/B85/B250 Mining Motherboard - 6 GPU 6 GPU RIsers with cables Intel G3900/G4400 CPU DDR4 4GB 64GB SSD 1000W Gold Corsair PSU Total Price 35k. Pm if interested.
|
|
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Ftn5aHrP.jpg&t=663&c=k_5Q8phGPCi5yg) Currently offering bare-bones riserless setups (In Bangalore ONLY): ONDA B250 D8P Riserless Motherboard - 8GPU support Intel G3900/G4400 CPU DDR4 4GB 64GB Msata SSD (SimpleMining OS Pre-Installed) PSU - 1200/1300W Platinum PSU Total Price 65k. Pm if interested. Also available : (Used) H81/B85/B250 Mining Motherboard - 6 GPU 6 GPU RIsers with cables Intel G3900/G4400 CPU DDR4 4GB 64GB SSD 1000W Gold Corsair PSU Total Price 35k. Pm if interested.
|
|
|
Imagine mining ETH with a single 280X back in late 2015, to sell at $1400 in Jan 2018? Basically what Satoshi felt pretty much. However most like me either didn't mine at a loss or they mined and sold when ETH hit $10 or $20.
To mine at $1 a coin and sell at $1000 is extremely rare.
Is that a personal attack or something ...
|
|
|
Shhh ... hes an anti-mining troll, who missed out on the mining boom bigtime, has major fomo, and now goes around trying to justify it on various mining threads/posts, so he can sleep better at night . Just ignore him.
|
|
|
@Claymore, any plans to support new ETC algo?
Russian mafia killed claymore and stole his millions of coins. He hasn't logged on in over a year... Yikes, I hope thats not true. Its dangerous to be successful.
|
|
|
ETC has a network hashrate of 5TH, ETH has a network hashrate of 250TH. It is assumed 50% of that 250 is 4GB or less (Gpus or Asics). ETC mining profitability with drop like bricks if they drop the DAG and all that 125TH hashrate shifts to it - could even be higher if the already offline 3GB gpus join in. Network hashrate will go from 5TH to ~130TH - thats a 2600% increase and will see a proportional difficulty increase, tanking profitability , so no, its not really an alternative.
|
|
|
33MH @ 100W in not so great imo. I have 29,7MH @ 76W.
Not at the wall. SW readings mean nothing. You gotta measure at the wall.
|
|
|
Hi tytanick,
Below is the response from Engineering team -
We’ve confirmed that the performance drop is due to the size of the DAG exceeding the total on-chip TLB capacity on the Pascal GPU. As a result, there is an increased number of TLB misses, which affects performance. Because the TLB is a fixed capacity hardware resource, and the ETH algorithm accesses the DAG randomly, we don’t believe there are any software optimizations that could reduce the TLB miss rate.
In the Volta generation, TLB coverage was increased by 4x, and large DAG sizes (up to ~8GB, which won’t be reached for many years) will still fit in the on-chip TLB. So these newer GPUs (Volta and beyond) will show much less performance sensitivity due to DAG size. Ty for sharing this. Nice insight.
|
|
|
Thank you for helping me optimize my 5600 XTs ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Could you help me with my GTX 1070s? Right now I get about 26 MH/s with a power draw of 110W I have the following settings : Core MHz = 0 Mem MHz = 1000 Power Limit 110 everything else is default. I know on Windows I used to get 30MH/s+ Any help would be appreciated, thank you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) PS. I am using phoenixminer-v5.1c On all GTX 1070/1080 cards you will need to keep increasing core a little with each epoch change or it will keep dropping hashrate, it will no longer be as high as what it used to be back in the days. Its caused by a driver bug that nvidia will not fix.
|
|
|
try pcie gen 2
Already tried but still no boot screen showed. Switch everything to Pcie Gen1, disable sound, disable onboard video and switch to pcix, turn off unused usb ports and sata ports (if you see the option in your bios).
|
|
|
That's impressive, but to erase any doubt, can you share your command line and what miner you are using right now to get that such hashrate without moding your bios, can't believe it dude. Since 2014 I've been in GPU mining but I never saw that kind of hashrate by factory bios of 570/580 8gb cards.
Claymore's miner injects timing straps at runtime ( in windows only ), so you do not need to bios mod anymore to get these results. They are pretty normal.
|
|
|
There could be several reasons: Do you have the same components as Red Panda? CPU, Mainboard, other components... Maybe the power supply? Are you using 230 V or 110 V?
My system takes 25W, as far as i know, that's quite good, not much system can takes lower than 25W. Assuming red panda even do better at 20W, so his VGA need 137-20 = 117W to perform 53MH, that's incredible. //Im using fsp 1200W platium 220V which is a tier 1 efficient psu also. This has everything to do with power. Are you on a 230v electrical outlet or 110v? That reduces PSU efficiency, by 5-10%. Also, a 1200w psu will be horribly inefficient below 20% load, resulting in 80-85% efficiency, while Redpanda may be using a 450-500w psu which will still be at 25%+ load so giving a 90+ efficincy at 130w load (even a silver PSU will give that). PSU's are most efficient at loads between 25%-75% of rated capacity, and at low loads can be horribly inefficient, barely above the 80% efficiency needed to qualify for the certification.
|
|
|
Only 22 of my Gigabyte Sapphire RX480-8GBs (Blower Version) made it to the mining cave, joining the 1080ti, P106, 1060, Vegas64 & 56.
I maxed all my circuits. And I gave up my other warehouse already.
44 x RX480-8GBs left sitting idle..... how much could I sell them during a GPU shortage?
What are your 1080ti's doing? I just cant seem to get them over 48mh on ethash on linux, gonna test on windows now ...
|
|
|
still working on helping my wife recover from 2x pneumonia (covid?) She got it in Jan. Fever is gone but there is lung damage and she seems to have: 1) endless post nasal drip 2) hidden acid reflux
Convey our best wishes for a speedy Recovery Phil.
|
|
|
miner software optimization might get 3090 to 150mhs...hopefully ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) No, Eth is memory bound, 3080 and 3090 have the same memory type and speed so the minor difference we will see would be due to 320 vs 384bit bus width. And this isnt on-die HBM, dont expect 90+ on anything. 1080 is 35mhs 1080ti is 50mhs that's 42.8% difference between 1080 and 1080ti, both gddr5x Umm ... the 1080 was a GP 104 with 256bit bus width. The 1080ti was a GP102 with 352 bit bus width, thats where the hash increase is coming from. That, and better binned memory that can clock higher. 3080 is 100mhs (there is a post that says 115mhs at 300w) if you do the math of adding 42% of 3080 to 100mhs that's 142mhs.
now nvidia says 3090 as titan like(they phased out titan, this is the new titan), if 3080ti is not released yet, then 3090 is better than 3080ti
if 3090 is better than 3080ti, then 150mhs is not impossible.
I dont think you understand anything about hardware, hash-rate or how the two correlate. I recommend some more reading.
|
|
|
miner software optimization might get 3090 to 150mhs...hopefully ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) No, Eth is memory bound, 3080 and 3090 have the same memory type and speed so the minor difference we will see would be due to 320 vs 384bit bus width. And this isnt on-die HBM, dont expect 90+ on anything. I pressed my Shenzen source for target selling price for 3090 but no news yet, however my local supplier hinted likely above 1k. Hmmmmm.....
No, prices would not be lower than the founders edition on almost anything. Not this year at-least.
|
|
|
|