 Show Posts
|
|
Pages: « 1 2 [3] 4 »
|
|
I'm using a underclocked bios to save power and make mining more efficient. Using Jukebox's Eth Mod
|
|
|
|
|
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o ssl://xmr.suprnova.cc:5221 -u xxxxxxx.worker03 -p x -a 4
|
|
|
|
|
Currently trying to mine xmr on supranova pool
But I keep seeing this on one of my rigs
Share rejected (109 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
happened 13 times in 13 minutes
|
|
|
|
HELP!!! cant figure this out |
|
|
|
|
trying to mine on dwarfpool but I cant figure out the batch file to mine straight to kraken exchange.
Everytime I try it keeps saying Wrong wallet address
|
|
|
|
|
I Get this on one o my RX480 cards it displays @ over 600h/s with lots of rejects I've tried intensity 4 with no luck.
It was fine up until v9.1 I think.
Since then I've not been able to mine for zec incase I damage my card.
|
|
|
|
|
cheers mate I guess I over did it with the options
|
|
|
|
|
This will have probably been asked many times but I cant find the answer.
I am trying to create a batfile to mine EXP on dwarfpool but I guess I'm doing it wrong.
Could some kind person please create a sample batfile to enable me to mine exp on dwarfpool eu server.
I will be using rx470 and rx480's
Here's what I have but it wont work.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool exp-eu.dwarfpool.com:8081 -ewal xxxxxxxxxxxxxxxxxxxxxxxxxxx.Worker03 -epsw x -esm 3 -allpools 1 -allcoins 1 -etha 0
|
|
|
|
|
Still getting the problem where 1 of my rx480 cards hashes at over 400 sols with lots of rejected shares.
I've ran it on stock and modded still the same.
Card works fine in ETH.
Ran it on different rigs to test
|
|
|
|
|
After hitting refresh a few times my balance shot up...but I still lost an hours mining on the pool.
This has happened before I'd mine for a few hours get nothing despite all the accepted shares then suddenly everything is ok again.
|
|
|
|
|
Anyone else having issues with flypool?
My unpaid balance is not changing been this way for over an hour now.
|
|
|
|
|
I wish someone would share a decent mod for the sapphire rx480
|
|
|
|
Loving this V9.0 !
So far, MSI RX480 8GB 1200/2110 @ 0.875v 70W = 220h/s vs 185 = 19% increase!
HIS HD7770 1GB 1020/1625 @ 1v = 77h/s vs 63 = 22% increase!
I dont understand this 1200/2110 @ 0.875v Is 1200 coreclock 2110 memory clock and how much did you under volt to get to 0.875v I use after burner to my reading are 937mv Yes 1200 is core clock, 2110 is memory clock and 0.875v is 875mv, i don't use msi afterburner so i dont know how much you can undervolt, i'm using the WattTool from here: http://www.overclock.net/t/1609782/watttool-a-simple-tool-that-combines-overclocking-with-vrm-monitoring-tweaking-for-rx-400-series, but be carefull, dont mess with what you don't know, you can damage your card. Thankyou I may have to reset my cards back to standard bios and try to alter the timings in afterburner. Does anyone have any effective timings for the Sapphire RX480 8gb ? Pretty please. |
|
|
|
Loving this V9.0 !
So far, MSI RX480 8GB 1200/2110 @ 0.875v 70W = 220h/s vs 185 = 19% increase!
HIS HD7770 1GB 1020/1625 @ 1v = 77h/s vs 63 = 22% increase!
I dont understand this 1200/2110 @ 0.875v Is 1200 coreclock 2110 memory clock and how much did you under volt to get to 0.875v I use after burner to my reading are 937mv |
|
|
|
|
Think I'll also try to update my drivers it may fix the issue...it may also break it lol
|
|
|
|
Well I'm stumped all 5 cards work fine except 1 ...all the same cards and bios.
The problem card is over hashing as I mentioned earlier all other cards are hashing at over 200+
The problem card is hashing at over 400+ with lots of rejected shares.
I've tried swapping the order it sits on the motherboard .
I've swapped it to another rig.
I've reflashed the bios. Nothing works. The card was fine in V8 and it works fine in ETH so its not the card.
I'm not complaining but I think something is off with the miner for RX480 cards
Yeah, something is wrong, most probably with your overclocked memory. Reset the card to stock clocks and see how it goes  Thankyou I value your reply. And I'm not saying you are wrong but it is puzzling me why the other cards are ok with the same bios. If I was to reset my cards to stock any idea what the best values would be to use in afterburner for the rx480 8gb cards? I am a little reluctant to change the bios to be honest as its set up to mine nicely for eth with a low power drain. I'm sure we can all agree its all about balancing hashing power with what it will cost you . You don't have to change bios to original, just set memory clock of that 480 to default 2000MHz with your favorite tool - AB, Trixx, Wattmann, Watttool, whatever And I hope you didn't put too strict mem timings in 2000 strap. Even Claymore's miners have the option for "-mclock", RTFM and don't forget to restart miner after change I tried to set my clock to default but it didn't do anything I guess the timing in the 2000 strap are to strict. I'm using jukebox's bios for eth on my cards. Still strange how none of the other cards are affected. |
|
|
|
Well I'm stumped all 5 cards work fine except 1 ...all the same cards and bios.
The problem card is over hashing as I mentioned earlier all other cards are hashing at over 200+
The problem card is hashing at over 400+ with lots of rejected shares.
I've tried swapping the order it sits on the motherboard .
I've swapped it to another rig.
I've reflashed the bios. Nothing works. The card was fine in V8 and it works fine in ETH so its not the card.
I'm not complaining but I think something is off with the miner for RX480 cards
Yeah, something is wrong, most probably with your overclocked memory. Reset the card to stock clocks and see how it goes Thankyou I value your reply. And I'm not saying you are wrong but it is puzzling me why the other cards are ok with the same bios. If I was to reset my cards to stock any idea what the best values would be to use in afterburner for the rx480 8gb cards? I am a little reluctant to change the bios to be honest as its set up to mine nicely for eth with a low power drain. I'm sure we can all agree its all about balancing hashing power with what it will cost you . |
|
|
|
|
Well I'm stumped all 5 cards work fine except 1 ...all the same cards and bios.
The problem card is over hashing as I mentioned earlier all other cards are hashing at over 200+
The problem card is hashing at over 400+ with lots of rejected shares.
I've tried swapping the order it sits on the motherboard .
I've swapped it to another rig.
I've reflashed the bios. Nothing works. The card was fine in V8 and it works fine in ETH so its not the card.
I'm not complaining but I think something is off with the miner for RX480 cards
|
|
|
|
|
