strange things...was replacing newtonjson.dll from beta 7 and all balances are fine now.
can this file impact this readings somehow?
As far as I know - not. The file is the same for all versions. I am preparing a new one, there should be balance calculations impoved. |
|
|
|
aaand one more...
TopAvgSp relates to "statwindow" line on .conf file or not?
if not -what period for TopAvgSp?
For the moment two different keys are used. "statwindow" for period of average prices and "avgspeedticks" for period of average speed. "Statwindow" is in general for whole config, "avgspeedticks" can be set for every pool. "avgspeedticks":10 - number of ticks for averaging worker speed value. 1 tick happens in 1 minute. Values can be from 1 to 60, if 0 then disabled. By default 10 ticks. |
|
|
|
anyone mining lbry on suprnova with MC?have wrong balances for a last days.is it me or suprnova?=)
update.it's MC.restarting MC fix the balances.was 57 lbry.after restarting - 115 lbry. why this issue?
I'll check this. If I understood correctly, LBRY Suprnova shows doubled balance. Do you have other coin balances with this pool to check? |
|
|
|
hey.i was thinking...yesterday lbry was lagging on WTM with that orange flag and stuck on 0.012 BTC with my 3x1070 for a couple of hours...maybe need to do some additional actions with coins that flagged "lagging"?reduce their cweight to 0-0.5 or maybe something else and flag "lagging" in a "status" column in MC to avoid mining them in that moments.can you implement that features?
Good idea. I'll check, what can be done. Had recently the same situation with Komodo. |
|
|
|
update.
have XZC and DGB-Skein on MPH and use priceid for these two coins.seems like they updating once on startup and no updating in future.just right now all the coins changed their values but not these two.is priceid okay?
update.
aaand on suprnova XZC too.set MPH to native profitability calculator and suprnova with WTM priceid. MPH was updating normally last minute. suprnova was standing on 0.007404.
so this is WTM priceid problem i guess.it updates on startup only.
Set "wtmsyncperiod": 1, in "general", and check, if there will be any changes in prices. When "Minebyaverage" is true, it takes the top from "average" column, when false, then top from "net" column. |
|
|
|
yepp.wtm+mph - works nice finally=)
aaand next question - btc balances for yiimp - possible?
Unfortunately, no. There is no centralised source for exchange rates on YIIMP. |
|
|
|
aaand MPH DGB-skein only zero in earnings,prices and other. "minprofit": 1.1,
"logactivity": true,
"donationfrequency" : 1440,
"gridsortmode": 2,
"minerkillmode": 0,
"traymode": 0,
"wtmbuffer": true,
"wtmsyncperiod": 1,
"wtmextracoins":true,
"remotesend": false,
"remotereceive": false,
"minerfolderpath": "MinerControl"
"nospeed": false,
"nospeedworker": false,
"autofee": true,
"pricewtm": true,
"balancemode": 0,
"weight": 1.0,
"minprofit": 1,
"btcfee": 0.2,
"sparam1": "hub.miningpoolhub.com",
{ "active":true, "cname": "digibyte-skein", "algo": "skein","priceid": "114","tag":"dgb", "folder": "_APARAM1_", "cweight": 1, "fee": 0.9, "command": "_APARAM2_", "arguments": "_APARAM3_ _SPARAM3__SPARAM1_:20527 -u _ACCOUNT_._WORKER_ _SPARAM2_ -i 27 -q" }, with pricewtm:false - works fine sooo.some sort of no price with WTM i guess... The reason here is that MPH names the coin digibyte-skein, WTM as DGB-skein. I'll link it to PriceId, thanks. |
|
|
|
|
Uploading just finished. Links added.
|
|
|
|
Package updated. Beta 5 now. Link1: https://drive.google.com/open?id=0Bz8-ln3QUcV4U3kzVXFzMUI0VUELink2: https://mega.nz/#F!rhAFCbIa!F4XoHfIYoPYgJ-V1TUyP2AClaymore ZCash miner v.12.2 EWBF Zcash miner v.0.3.1b CPUminer-opt-3.5.12-windows 1) Added WTM Buffer. Radically reduces amount of API requests to WhatToMine and accelerates total refresh speed. It reads the prices from WhatToMine with adjustable frequency. Pools get profitability data from buffer. New keys in "general" block: "wtmsyncperiod": 3, time in minutes to refresh WTM prices, by default 3 minutes "wtmbuffer": true, enables or disables WTM Buffer. By default enabled. "wtmextracoins":true, enables prices for coins not included in basic list of WTM. By default enabled. If disabled, prices for coins with "PriceID" in algo section will not be accuired (beta2). 2) For pools with self-defined profitabillity added possibility to switch to WTM-based prices. New key in "pool" section: "pricewtm": true by default is false. 3) AikaPool attached. 4) New algos for YIIMP and Zpool. 5) Comparison for hashrates predefined/real and marking the difference with colores. Color intensity for undervaluted rates moves to red, overvaluated to yellow, difference +/- 5% of predefined is green. Test feature will be developed further. |
|
|
|
ok.if it's not possible to see WTM balances is it possible to replace MPHs profitability table with WTM?cause it's sooo slow...sometimes i mine skein or ftc for 30-40 mins but the last 15-20 mins they are twice as not profitable...in same time MPH dashboard tells me that diff rises, but norm.profit table showing old data with high profitability.
Yes, I can make a selection for MPH, which profit calculations to use, their own or WTM-based. |
|
|
|
hey.is it possible to add some parameter like "aparam4" or else just for nvidia inspector OC profile to load for certain algo?
I am working on a new update with some new features for the moment. After that I'll check what can be done with overclocking scripts. i added WTM-feathercoin.how can i monitor balances with it?
It is called WTM, because it requests only price info from Whattomine. Pluses - every pool can work with it. Mnuses - no balance and speed possible. That's why to receive this data I need to code them in application hard. |
|
|
|
another one pool for one coin?=(okay...
Not for the one. It is coin oriented service. You can combine here any DaggerHashimoto coin + SC, LBC, or DCR. Prices are calculated by WTM, there is no any difference, which pool you will use. Simply choose yourself and enter the pool, that you prefer best of all for particular coin. |
|
|
|
but i'm telling you about this.  Syntax is correct. Rename the pool name from MiningPoolHub to DualMining. It detects dual algos under this title only. "DualMining": { "account": "MPHAccount", "worker": "1070", "pricemode": 0, "weight": 1.0, "sparam1": "hub.miningpoolhub.com", "sparam2": "-p 123", "sparam3": "stratum+tcp://", {"cname_first": "ethereum","tag_first": "eth", "hashrate_first": 88500, "algo": "dual", "cname_second": "sia","tag_second": "sc", "hashrate_second": 1950000, "folder": "_APARAM1_", "cweight": 1, "fee": 2, "command": "_APARAM2_", "arguments": "_APARAM3_ -epool europe.ethash-_SPARAM1_:20535 -ewal _ACCOUNT_._WORKER_ -epsw x -dpool _SPARAM1_:20550 -dwal _ACCOUNT_._WORKER_ -dpsw x -dcoin sia -dcri 65 -esm 2 -allcoins 1","usewindow":true} |
|
|
|
how to assign eth+sia on miningpoolhub correctly? i was adding this on algorithms { "name": "dual", "display": "Dual", "hashrate": 90000, "mu": "kH/s", "devfee": 2, "power": 80,"aparam1": "Miners\\Nvidia\\Clay8", "aparam2": "EthDcrMiner64.exe", "aparam3": " -mport 4312 -dbg -1 -allpools 1 -mode 0" }and this in MPH algos {"cname_first": "ethereum","tag_first": "eth", "hashrate_first": 88500, "algo": "dual", "cname_second": "sia","tag_second": "sc", "hashrate_second": 1950000, "folder": "_APARAM1_", "cweight": 1, "fee": 2, "command": "_APARAM2_", "arguments": "_APARAM3_ -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal _ACCOUNT_._WORKER_ -epsw x -dpool hub.miningpoolhub.com:20550 -dwal _ACCOUNT_._WORKER_ -dpsw x -dcoin sia -dcri 65 -esm 2 -allcoins 1","usewindow":true}but only zeros in earnings. I guess the reason can be in -esm value. It is proxytype for a pool. A sample from Claymore for MPH is without this parameter at all. |
|
|
|
|
Show Posts
