After setting 2: Try restarting the miner from the pools menu by just hitting the submit button without changing anything.
Also I think if you get the extranonce working it changes the version of cgminer that is running to 4.8.0 which you can check from the main page.
I've tried restarts (and reboots), with and without changes - but just again now to be certain. No change. I am cgminer 4.7.0 across the board. ..and now, after some pool mods and subsequent restarts, I have 3 miners at 4.8.0, flag 2 - but still no ex sub. Make sure you're pool is formated this way: stratum.westhash.com:3334#xnsubI tested exactly like that, it doesnt work. Hrm. That's frustrating, to be sure. I've got it working on the latest firmware with both the included cgminer as well as the updated binary. I wonder if it's the difference in network topology, although I would find it far-fetched myself. I'll ponder it. In the mean time, what variables are you passing in the password? I pass price and difficulty. I also tack on %h to the end of my payment address to help identify the units. It's working ... it's working!! Had a few minutes today to test. I was always assigning price in the password field, but I wasn't using #xnsub at the end of the ULR. When I added #xnsub and, for good measure, the difficulty to the password field - it started working. (this with the price set artificially low to test live) I've since removed the difficulty, and all is well—on the 4.8.0 miners. On the 4.7.0's, #xnsub kills 'em (dead). Now working to get my 4.7's to 4.8's... Thank you! My pleasure! I'm glad you're up and running.
|
|
|
After setting 2: Try restarting the miner from the pools menu by just hitting the submit button without changing anything.
Also I think if you get the extranonce working it changes the version of cgminer that is running to 4.8.0 which you can check from the main page.
I've tried restarts (and reboots), with and without changes - but just again now to be certain. No change. I am cgminer 4.7.0 across the board. ..and now, after some pool mods and subsequent restarts, I have 3 miners at 4.8.0, flag 2 - but still no ex sub. Make sure you're pool is formated this way: stratum.westhash.com:3334#xnsubI tested exactly like that, it doesnt work. Hrm. That's frustrating, to be sure. I've got it working on the latest firmware with both the included cgminer as well as the updated binary. I wonder if it's the difference in network topology, although I would find it far-fetched myself. I'll ponder it. In the mean time, what variables are you passing in the password? I pass price and difficulty. I also tack on %h to the end of my payment address to help identify the units.
|
|
|
After setting 2: Try restarting the miner from the pools menu by just hitting the submit button without changing anything.
Also I think if you get the extranonce working it changes the version of cgminer that is running to 4.8.0 which you can check from the main page.
I've tried restarts (and reboots), with and without changes - but just again now to be certain. No change. I am cgminer 4.7.0 across the board. ..and now, after some pool mods and subsequent restarts, I have 3 miners at 4.8.0, flag 2 - but still no ex sub. Make sure you're pool is formated this way: stratum.westhash.com:3334#xnsub
|
|
|
Hey guys, I ran a search through this thread but couldn't scratch up an answer. One of my SP20s is hashing fine, but the time and date on the machine is not correct, and it breaks the graphs. Has anyone dealt with this issue in the past?
Cheers.
yeah, i had this when it connected to BusyBox which is apparently a linux embedded systems toolbox (see events). hash line got broken and date changed to ~1-2 week ahead. Maybe miner somehow reaches into the future? It was definitely the NTP server in my case, the traffic was being blocked by my firewall. I'm still digging around in the config to find where I fat-fingered it, but I'm sure it will sort. Until then, this miner is livin' in the past!
|
|
|
It's on the same subnet as a working unit, and we don't block NTP traffic on the ASA. If I ssh in and configure it manually will the GUI pick that up? Cheers. Nope, scratch that--I lied. The ASA is blocking NTP requests. I'll need to dig up the entry real quick! Thanks for the help, I appreciate it. Cheers.
|
|
|
It's on the same subnet as a working unit, and we don't block NTP traffic on the ASA. If I ssh in and configure it manually will the GUI pick that up? Cheers.
|
|
|
Hey guys, I ran a search through this thread but couldn't scratch up an answer. One of my SP20s is hashing fine, but the time and date on the machine is not correct, and it breaks the graphs. Has anyone dealt with this issue in the past?
Cheers.
|
|
|
Last time I used Circle they charged me $15...screw that! Paybase is free you just pay the spread.
|
|
|
It's like a dream that never dies Paycoin spreads its wings and flies I mean spreads its volva and writhes It's like a cancer spread on toast Tastes so good then you're a ghost
Never have I seen a friend as true as Homero in the end He will make us rich one day cock to anus we will stay Hashtalking on our merry way
I read this out loud ( dramatically) and made my wife lol. Well done!
|
|
|
I like it. This looks good to me!
|
|
|
Hey cats! Has anyone used the serial connections on the SP20 to connect multiple units to one controller? Does that function work? Is it documented?
It was a mistake done in the interview by the reviewer. The serial console is for debugging via a special cable, not for connecting multiple units. Ah, no problem. Thanks for the speedy reply--I'll punch a few more holes in the firewall then!
|
|
|
Hey cats! Has anyone used the serial connections on the SP20 to connect multiple units to one controller? Does that function work? Is it documented?
|
|
|
PS I am no expert on that foto forensics site, but it basically outlines transition areas between image sources in white and highlights areas that have a different pixel count. The vette pic is most likely a PS'd image.
I dig it, cheers.
|
|
|
I feel sorry for a lot of you for the hatchet job that you have done to destroy a legit business. I have never seen such a vendetta against a businessman in my life. Are you guys jealous?
Your comeuppance will sting you where it hurts most, in your wallets.
Do you have good lawyers representing you?
Have a nice day.
This just in Josh Garza cronies threaten with lawsuits! Yes, he is. INAL, but that's usually a sign things are going south as well....
|
|
|
Pardon my ignorance if this has been reviewed, but I couldn't find anything in the quickstart guide for the SP20. Is the serial port used to chain units together, and if so is that currently working?
Cheers.
|
|
|
I read through that site three times now and I guess I can't grasp the finer points. I'll take people's word on it, unless someone wants to ELI5.
|
|
|
I feel sorry for a lot of you for the hatchet job that you have done to destroy a legit business. I have never seen such a vendetta against a businessman in my life. Are you guys jealous?
Your comeuppance will sting you where it hurts most, in your wallets.
Do you have good lawyers representing you?
Have a nice day.
Welcome to a real community, come on in. suchmoon is baking cookies, Paul Revere is out back grilling some burgers. How has life been treating you? Oh you dont say, thats a shame to hear. We also have good beer, if that suits you.
|
|
|
I feel sorry for a lot of you for the hatchet job that you have done to destroy a legit business. I have never seen such a vendetta against a businessman in my life. Are you guys jealous?
Your comeuppance will sting you where it hurts most, in your wallets.
Do you have good lawyers representing you?
Have a nice day.
I feel like we're probably good, but thanks for dropping in on us with your concerns! You're a neat fella.
|
|
|
In other news: I just went and bought myself an S5! Woo Hoo! Was listed on Ebay for $500 w/shipping and I offered $460, not thinking he would actually go for it. To buy one from Bitmain looks to be ~$450 w/shipping and a month to get it, so I think $460 is a good price.
Good job! Is this your first foray into the mining world?
|
|
|
Hmmm, somewhere I had the original image, all I can find though is the tiny one on the Myspace page. This is a non-important tangent anyways.
Carry on gentlemen.
Right-click, "open image in new tab."
|
|
|
|