If the snapshot is the 31st or 1st and is does not have Bittrex support then they need to announce that ASAP.
The Spreadcoin wallet takes a day to download the blockchain so alot of people who have only coins on Bittrex and no local wallet would get F...ed
Taking that into account the most likely annoucement this week will be the snapshot is not happening this week.
or a more positive anoucement could be Bittrex fully supports snapshot and will list helium.
I think the best possible anouncement(for me) is they anounce Bittrex support and snapshot happens in two or three weeks. This would give more time for helium prospectors to buy more spreadcoin (and me more time to mine it.)
There was no announcement yet, but we can be sure that the snapshot won't happen this week, not even in the next two weeks. When it was postponed, we were told the snapshot date will be closer to the start date which takes the snapshot date roughly to middle of September. But you are right, it takes a day at least do download and sync the wallet. That's why I have already downloaded and start it up for an hour once in every other day just to keep it synced in case Bittrex won't participate. |
|
|
|
Hi dev. You need change default ports. And my masternode dont take profit. ./das-cli getinfo
{
"version": 120200,
"protocolversion": 70201,
"walletversion": 61000,
"balance": 1000.00000000,
"privatesend_balance": 0.00000000,
"blocks": 35392,
"timeoffset": 0,
"connections": 18,
"proxy": "",
"difficulty": 1732.150480738207,
"testnet": false,
"keypoololdest": 1503539310,
"keypoolsize": 1001,
"unlocked_until": 0,
"paytxfee": 0.00000000,
"relayfee": 0.00010000,
"errors": ""
} masternode.conf mn1 ip:9399 7rcxxx166 6081xxx6b9 1 das.conf server=1
listen=1
daemon=1
goldminenode=1
masternodeprivkey=my_ket
externalip=my_ip ./das-cli masternode start-all
{
"overall": "Successfully started 1 masternodes, failed to start 0, total 1",
"detail": {
"status": {
"alias": "mn1",
"result": "successful"
}
}
} ./das-cli masternode list-conf
{
"masternode": {
"alias": "mn1",
"address": "my_ip:9399",
"privateKey": "my_key",
"txHash": "my_hash",
"outputIndex": "1",
"status": "PRE_ENABLED"
}
} My das.conf on the VPS masternode a bit fifferent: rpcuser=xxxxxxxxxx rpcpassword=xxxxxxxxxxx rpcallowip=127.0.0.1 listen=1 server=1 daemon=1 staking=0 masternode=1externalip=xxx.xxx.xxx.xxx masternodeprivkey=xxxxxxxxxxxxxxxxxxxxx I am not sure if this is the only issue, but worth a try. |
|
|
|
Just to confirm, you have 3 masternodes and you receive 2-3 payments a day? Or you have a masternode which receive 3 das 3-4 times a day? (the total of 9-12) I have 10 masternodes and I receive between 8 - 11 times a day (1 per node on average) between 1.6 - 2.2 DAS per payment. |
|
|
|
|
I am doing my best to learn a bit more about you rmasternode system.
Your wallet looks like a Dash fork and you have 'masternode' in your header. However the 'masternode' link doesn't work in your site and haven't found anything useful in your previous ANN.
How many coin is needed and do you have a guide how to set up a Linux VPS masternode?
|
|
|
|
|
I am doing my best to learn a bit more about you rmasternode system.
Your wallet looks like a Dash fork and you have 'masternode' in your header. However the 'masternode' link doesn't work in your site and haven't found anything useful in your previous ANN.
How many coin is needed and do you have a guide how to set up a Linux VPS masternode?
|
|
|
|
|
How many coin is needed for a masternode? Is there a guide how to set up a masternode on a Linux VPS?
|
|
|
|
I have 2 suggestions: 1, Cheap... DAS: Cheap and working well. It is a DASH clone, so you can have the hot/controlling wallet setup for better security. The only problem is, the developer isn't too active. 2, Bright outlook : Helium. You can't buy it yet, the project will start in a few weeks time. You can find mor einfo here: https://bitcointalk.org/index.php?topic=1809278.new;topicseen#new |
|
|
|
Where can I buy HELIUM? How many coins need to a masternode?
Helium hasn't been released yet. You can buy SpreadCoin (SPR). There will be a snapshot date soon, probably within a few weeks. After this snapshot you are entitled to the same amount of Helium (HLM) as many SPR you had in a participating address (or Bittrex if they participate). So buy 1000 SPR and wait for the announcement. |
|
|
|
|
Hello,
Could you elaborate a bit on this "promise open the market with a price 150% over the presale cost of token" , please?
Is it s 150% buy back guarantee?
When this promise will be fulfilled, how long the investor needs to lock the capital?
Could you give a short explanation about how the project will be able to keep this promise?
Any guarantee to the investors apart of the 'promise'?
Thanks.
|
|
|
|
|
I can see the possibility of the adoption of this coin and the project, I just can't figure out why.
Why would it be better options than a pre-paid festival card which anyone can top-up with online transaction or cash? Several festivals in Central Europe work like this. Only festival payment is accepted. This festival card can be a plastic card and it can be linked to a smart phone, so you can use your phone to pay for any goods or services too.
|
|
|
|
I'm excited about the launch of Helium project as well. My 1000 SPR's are ready for the MN. i hope setting the MN thru qt wallet will also be available as I initially plan to use a personal VM. If not, I'll go for VPS.
There will be help for setting up masternodes. There will be 2 choices: 1, You can set up your own, on your PC or preferably on a VPS... This is the cheapest, as you can have the suitable solution for $1 a month from https://www.arubacloud.com/2, You can order a hosting service from https://node-vps.com/web/ They would set up your node and host it for you... Easiest and better if you don't really know what you are doing. |
|
|
|
So my masternode kept saying missing. So I regot my masternode private key and outputs which had changed. I entered the new stuff on my remote and now my node is finally saying enabled again. The issue is now its not paying out at all. Is it possible my ACC 0 has changed?
The account 0 is the address where the 1000 Das collateral is hold. When you sent the the collateral to that address you had the TXID which yopu are using in the masternode.conf file (you will get it by masternode output command). When you mentioned, your masternode outpust has changed, I guess you mean the transaction ID changed. Have you sent the 1000 das to a different address in your wallet or a different wallet? The masternode kept showing missing and would not work. So I went to the debug console in the wallet and got the new master node private key and TXID like you mentioned. I am unsure why this information changed from the first time I set up my node. I renetered the new information into the masternode.conf and das.conf file. I then changed the information on my remote side. Did this change also affect my AAC 0? The ACC 0 is where I sent the initial 1000 DAS. That was all working for a few days until the missing issue. Since updating everything my masternode now shows enabled, but doesnt pay. If my ACC 0 did change do I now need to send 1000 DAS to that new address? If so how do I get back the 1000 DAS I sent to the old address? When you enter the 'masternode genkey' command it will generate a new masternode key/ That is not an issue, your old key is valid, and this new one is valid as well. But I am a bit worried about the TX. Is is the confirmation about the 1000 deposited into the wallet address. If that one changed, that's mean there was a new transaction fir the 1000 das. If the status is enabled and you can find your IP address in the masternode tab, then do nothing, just wait a day... I am receiving payment 3-4 times a week, not every day as before. |
|
|
|
Please wait till VIVO is listed in exchange before start to trade (for safety reason)
Good idea... But not only for safety reason, but to conserve your capital. If you buy now for $1+, you would lose a big chunk of this capital. I would be very surprised if after a month in the exchange, Vivo's price would be more than $0.2-$0.25. I think, you are completly wrong. Because nobody gives you a coin under own cost. Then nobody will buy Vivo, so everyone will stop mining and the project will die... The market price is determined by the buyers and it doesn't has any correlation with your own cost. You can start making furniture by hand and try to sell them over your own cost, but likely nobody will buy them as the furniture factories can sell similar for cheaper. The only exception if you can offer something unique, something worth paying the extra for... What can Vivo offer which makes it better than everything else we have already seen? If nothing special, people will buy CHC, ARC, DAS and many other masternode coins for a fraction of your asking price. |
|
|
|
Please wait till VIVO is listed in exchange before start to trade (for safety reason)
Good idea... But not only for safety reason, but to conserve your capital. If you buy now for $1+, you would lose a big chunk of this capital. I would be very surprised if after a month in the exchange, Vivo's price would be more than $0.2-$0.25. It doesn't really matter how difficult is to mine the coin, the only important think is how much the buyers willing to pay for it. And it would need a very good reason to chose this fresh coin instead of some more established one for half the price per masternode. |
|
|
|
The total amount of coin supplied on the market of HLM coin is how much
HLM is a fork of SPR (Spreadcoin). When it starts on September, it will have the same amount of supply as SPR (aroung 8.6M). As it is In the future, it will grow up to around 21M. A part of this total supply will be locked into MasterNodes, so the circulating supply will be much less. How much will be on the market, that is a very good question, nobody really knows. |
|
|
|
So my masternode kept saying missing. So I regot my masternode private key and outputs which had changed. I entered the new stuff on my remote and now my node is finally saying enabled again. The issue is now its not paying out at all. Is it possible my ACC 0 has changed?
The account 0 is the address where the 1000 Das collateral is hold. When you sent the the collateral to that address you had the TXID which yopu are using in the masternode.conf file (you will get it by masternode output command). When you mentioned, your masternode outpust has changed, I guess you mean the transaction ID changed. Have you sent the 1000 das to a different address in your wallet or a different wallet? |
|
|
|
Why there is no any payments to MN now? Last payments were 2 days ago. Is this a bug or done for a specific purpose?
There has been MN payments. Payments have been received yesterday and today. There are 15 enabled Masternodes in the network at the moment. But no one gets reward. Block explorer shows that last 100 block rewards got only miners. Why? Some masternode owners have hot/cold wallet masternode setups.
What means "hot/cold wallet masternode setups"? Hot wallet is the MasterNode wallet on the VPS or any other remote machine. It has no coin, the balance is 0 and need to run 24/7 The cold wallet is your local wallet, this one is holding all the coins. You lock the 1000 VIVO into this wallet using one of it's account addresses where you send the 1000 exactly. You will receive all the reward into this wallet too. The cold wallet doesn't need to run 24/7, it doesn't need to run at all. |
|
|
|
i have a cold setup on windows. the result of masternode status is " Masternode successfully started"! do you think a restart will work or there is another problem?
Thanks... I would restart the wallet and let it synchronise to the blockchain again. What is the error messages in your debug file? (same folder as the config files) |
|
|
|
There's a good chance many people will dump their SPR right after the HLM snapshot, so dumpers will need to be quick off the mark. It's therefore going to be exciting to see whether price continues to climb towards the end of month (snapshot), or if people will dump a couple days before to ensure a nice profit (but forfeiting their HLM claim). Hodling both can of course be worthwhile too. There are many ways to play this game. Nonetheless, I am excited to run a master node for the first time.  I sure hope Bittrex allows us to claim while keeping Spread there. The windows spread coin wallet isn't stable enough to entrust 1000 spread on it. I might keep my spread after and run some masternodes on there too, but I do not like the competitive cap for masternodes they have. The price to run a masternode will skyrocket well past 1k if the coin is successful. Dash has 4500 masternodes and Spread is capped at the 1,000 masternodes who have the most collateral. I don't think Helium should go the same direction. I am not sure SPR has masternodes, the last time it was only a plan (for a few years). In the Helium blockchain, everyone with 1000HLM will be eligible to run a masternode, there won't be any limit of the numbers of the masternodes. Too many masternodes won't be a problem, as the HLM supply is very limited and not only Masternodes will require collateral, but the Service nodes as well, probably much greater collateral that the masternodes. |
|
|
|
i have a das masternode and after paying daily an error occured. i restarted the mn, everything looks okei but it didn't pay for 60 hours. is this normal?
Not really... Do you have a Windows or a Linux masternode? Is it hot or cold setup? What is the result for the 'das-cli masternode debug' (if linux) or 'masternode status' (if it is a Windows masternode)? |
|
|
|
|
Show Posts
