You can still use two 1000w PSU's to run them so you are still kind of wrong  THE 2000W PSU WAS ON SALE IN A 220V (EU/ASIA) MARKET-- In the USA, a 2000W load in a single room will trip the circuit breaker or blow a fuse. 2000W is too much for the electrical code standards in the USA (120V circuits). If you run a 2000W PSU in the USA you could overheat the wiring in a house and cause a fire. Special 220V circuits for ovens, dryers, garage equipment, and air conditioners must be installed by licensed electricians. --scryptr No fucking duh. Also, just because the shit tier 15A circuits are common doesn't mean you're gonna cause a fire - most houses actually have one or even several 20A circuits. scryptr is dead on on this I the past i have run two rigs each on 1000 watt psu's on a 20 amp circuit with 12 guage wire which is spec for 20amp curcuits however resedential us circuits even 20 amp are not rated for CONTINIOUS load even at the 1800 watts i was pulling , Power spikes can happen and eveb though the circuit never tripped when i moved the miners to a diff location i noticed the outlets were browing and pulling out the entire thing you could see the wires were in terrible shape, 20 amp or not never put more than 1000 to 1400 watts on a residential specced 20 amp |
|
|
|
You can still use two 1000w PSU's to run them so you are still kind of wrong dual psus is dangerous had them catch fire before , crossing rails by accident I NEVER use dual psus anymore |
|
|
|
New version with Vega support is close, currently I see 35-36 MH/s ETH at stock clocks and huge speed for second coins. But it's too hot even at 1.0v for core and 0.9v for memory.
Hey Claymore, have you lowered core clock massively ? Should be as or more efficient than an 580, it is possible. Not yet, also I did not change anything in bios, but I'm sure it's possible to make it much more efficient with bios/voltage/clocks changes. BTW, at "-dcri 500" I get 4600MH/s DCR (at stock clocks) after some Vega-related improvements in assembler code (i.e. these improvements are not available for Polaris cards), now I'm working on SIA and PASC... At "-dcri 100" I see 35MH/s ETH and 3500MH/s DCR. If I set 1050MHz for memory (default is 945MHz), I get 40MH/s ETH. yeah the Vega cards look like they will be great in the winter here where cooling is not an issue , I might build a rack or so of them for dual mining but 300 watts per card is nuts , theres no PSU outthere that can power six of those This or Server power supplies will work just fine.  http://www.super-flower.com.tw/products_detail.php?class=2&sn=16&ID=119&lang=those psu are godly expensive, server style could work but the issue woth those is excessive noise add on to the fact that the pic-ie and pico sellers with resasonble packages have dissapeared (sidehack and finsky) , the vega cards look like too much of a hassle unless you have a perfect climetcontrolled area and deap pockets to buy 2000 watt modular psus. Dual mining is great and all that but wattage use needs to be around 250 max So? You said no PSU out there that can power six... now eat the words. lol BOXED , I what I meant to say was no reasonably priced PSU, however I had no idea there were 2000 watt Modular ATX psu's out of there |
|
|
|
New version with Vega support is close, currently I see 35-36 MH/s ETH at stock clocks and huge speed for second coins. But it's too hot even at 1.0v for core and 0.9v for memory.
Hey Claymore, have you lowered core clock massively ? Should be as or more efficient than an 580, it is possible. Not yet, also I did not change anything in bios, but I'm sure it's possible to make it much more efficient with bios/voltage/clocks changes. BTW, at "-dcri 500" I get 4600MH/s DCR (at stock clocks) after some Vega-related improvements in assembler code (i.e. these improvements are not available for Polaris cards), now I'm working on SIA and PASC... At "-dcri 100" I see 35MH/s ETH and 3500MH/s DCR. If I set 1050MHz for memory (default is 945MHz), I get 40MH/s ETH. yeah the Vega cards look like they will be great in the winter here where cooling is not an issue , I might build a rack or so of them for dual mining but 300 watts per card is nuts , theres no PSU outthere that can power six of those This or Server power supplies will work just fine. http://www.super-flower.com.tw/products_detail.php?class=2&sn=16&ID=119&lang=those psu are godly expensive, server style could work but the issue woth those is excessive noise add on to the fact that the pic-ie and pico sellers with resasonble packages have dissapeared (sidehack and finsky) , the vega cards look like too much of a hassle unless you have a perfect climetcontrolled area and deap pockets to buy 2000 watt modular psus. Dual mining is great and all that but wattage use needs to be around 250 max |
|
|
|
New version with Vega support is close, currently I see 35-36 MH/s ETH at stock clocks and huge speed for second coins. But it's too hot even at 1.0v for core and 0.9v for memory.
Hey Claymore, have you lowered core clock massively ? Should be as or more efficient than an 580, it is possible. Not yet, also I did not change anything in bios, but I'm sure it's possible to make it much more efficient with bios/voltage/clocks changes. BTW, at "-dcri 500" I get 4600MH/s DCR (at stock clocks) after some Vega-related improvements in assembler code (i.e. these improvements are not available for Polaris cards), now I'm working on SIA and PASC... At "-dcri 100" I see 35MH/s ETH and 3500MH/s DCR. If I set 1050MHz for memory (default is 945MHz), I get 40MH/s ETH. yeah the Vega cards look like they will be great in the winter here where cooling is not an issue , I might build a rack or so of them for dual mining but 300 watts per card is nuts , theres no PSU outthere that can power six of those |
|
|
|
Just wait few weeks, GPUs are in stock at lot of sellers and price will go down soon too.
yup the low eth prices have seen to that |
|
|
|
What was the expected ship date for Batch 1 of the Antminer D3s?
sept |
|
|
|
You can buy this preorder at https://www.gigawatt.sg/shop/dash-miners/innosilicon-a5-dashmaster-psu-batch-1/ and lock in hosting at 3.3c kwh with onsite repairs. You have to be a token holder in the ICO http://alturl.com/ugese you could buy just one token and then rent tokens or pay retail hosting otherwise you should buy enough tokens to power the A5. You can check out their instagram see build out going fast and on time https://www.instagram.com/gigawatt_mining/IF you don't know Giga Watt check search CEO name on coindesk https://www.coindesk.com/?s=dave+carlsonNo offense to innosilicon but I felt safer preordering from Giga Watt, if there are problems I feel like I'll get a refund easier and if it's a piece of shit constantly having problems then I'll have pros helping keep it running. I trust innosilicon not to run off with my money, but I've been burned by pre orders before. Delays, specs different than specified, and yes those that just never deliver. So I trust Giga Watt, only way I was gonna order one of these and sick of Bitmain dominating mining scene. stop shilling for Gigawatt, you posted the same stuff on every theread we get it. Its the same old cloud mining BS, there are other forums for that , me I personally will NEVER cloud mine again IDGAF what new face they put up on it , monkey see monkey do, If i cannot physically visit the location where my hardware is hosted, I'm good. This new spin on cloud mining will only benefit the the ICO holders, not miners , no more shilling pls A5's seem to be sold out , cloud mining companies and their minions bought them all up, I bet they bough out the L3+, D3s too , stop supporting cloud miners dummy's, buy you own gear and host with a reputable local company if you must /sigh |
|
|
|
They put the new batch up to 1500 though, as opposed to the one batch at 1400.
Even at 1400, they were quite a bit more expensive per MH than the L3+ and not all that much less in absolute terms.
I suspect the only reason they're getting away with it is that Bitmain isn't even close to being able to keep up with the demand on the L3+, coupled with the much higher reported issues with Bitmain current-gen tech products vs Innosilicon getting THEIR issues with the first 2 A4 batches fixed in later batches and WORKING WITH CUSTOMERS to fix earlier batch machines.
oh i did not realize they raised thier prices |
|
|
|
I am sure that at this point decent team doesn't care about a dump, but they promised this before, so they are doing this. But your math is wrong as f*ck...There's 1 million decents coming from bounties, not sure how you price that as 50btc or less i thought bounties were 150k dct |
|
|
|
|
I all comes down to price , availability and power usage , yeah the hash rate and mods by miner devs are important
but no one knows what the true combination of thosw three factors are, for now the smart money is sticking with nvidia
|
|
|
|
Really!!!!is it possible with paper and pencil??? har har har I think ive heard it all, hope u have alot of paper😂😂😂 |
|
|
|
I lost track..
when were these units supposed to ship?
I realize deadlines can slip
but curious
thanks
Well I saw a screen shot above that says shipping from factory on Oct 2017 and in my opinion with a 10,000 usd at stake, you will miss a lot of opportunity to gain with that amount. Ill wait for a price drop 10k istoo much |
|
|
|
|
Innosilicon miners cost too much
|
|
|
|
MOQ 5 on the A4, unfortunately.
There WAS a group buy early on where you could order "only" 3 at a time, but I dunno if they'd honor that at this late point.
Innosilicon seems to be the only major miner maker that doesn't run it's own mining farm - probably because they are the *only* miner maker to date that already had an existing chip-making business before they got involved in cryptocurrency ASIC making (I don't count SFARDS there due to how it came into existence, though the WiiBox side of SFARDS might count the GridSeed side does not).
the cost is low for 5 thoug only 2BT around 6k, i think each L3 is 40 LTC or around 1700USD |
|
|
|
|
A4s are cheaper 280 mhs for 1000 it seems why buy an L3+ now
|
|
|
|
20 to 30 if btc price stays at these levels. My aim is not only to profit but also bury baikal and pinidea for their ignorant ass attitude towards their customers.
bclcjunkie A part of me has a lot a respect for you, I agree baikal and pinidea treat us like shit. I was going to give them 30K USD worth of orders but needless to say they have big priority customers. I agree with you. I'm waiting for two Baikal miners for more than 3 months. I think there is no hope anymore. Good to know that Pinidea has the same approach!! what do you mean waiting? you mean you paid and they did not ship? never heard of this |
|
|
|
|
Im in for 4 if we can get a volume discount for 3k per unit
|
|
|
|
Greetings all,
it has been a while since my last baikal groupbuy but the manufacturer is prepared to give us a good deal if we can come up with the numbers. 50 units will really give us some buying power. Deadline is the end of the month to build numbers.
x11 2000mhs 430w
x13 1600mhs 430w
x14 1600mhs 440w
x15 1600mhs 450w
quark 2000mhs 248w
qubit 2000mhs 280w
Price: $6500usd including shipping, we will need at least 10 units to get this discount, the more units we can get the better.
miners are available for deployment.
NOW before we get everyone jumping on saying; what about ibelink, what about A5, what about bitmain D3:
WE HAVE HEARD THIS BEFORE, BAIKALS VALUE IS OUTSIDE OF x11 MINING, and BAIKAL HAVE UNITS AVAILABLE NOW
I realise a lot of people do not want to get these miners but this thread is to allow an EASY way for customers to buy, so PM me and lets get this show on the road.
Ibelink Batch 2 will be on sale soon (wait for my thread) but once again it will be a long wait until you get your miners
6500 are you crazy? they just sent me an email offering. to sell for $4000 , 1500 is the most id pay for a grp by |
|
|
|
Vega is ... hot. In stock it takes about 400-450W in dual, 300-350W in ETH-only mode at about 33MH/s. And it's throttling like hell. It's very good in dual mining mode, but it's too hot.
Undervolt it - DUH. I forced mine to never go above 1.025V, and she mined Sia under Linux at 1600Mhz stable! :3 yeah but what was the wattage, even a 120 mv uundervolt on an RX 580 8GB only saves 30-40 watts 250 watts for 31 eth and 1600 SIA is garbage for a FE card that costs $900 I can get 37 mhs eth and 1300 SIA out of a gtx 1080 ti for 230 watts , and its a cheaper card |
|
|
|
|
Show Posts
