What size is it? Probably doesn’t say right, otherwise you would’ve mentioned it.
The picture shown has “2XL” printed on it |
|
|
|
|
minerjones is running an auction for one now as well. a 1 btc that is loaded.
nevermind that auction is for a bitbill - totally different.
|
|
|
|
|
congrats @HeRetiK and thank you @Ratimov for the raffle.
|
|
|
|
|
received mine today - I wanted to say I was very surprised and honored that you included me on the back cover - Thank you!
Look forward to see what else you release!
|
|
|
|
|
a coin, a print - whatever you do with it will be great!
|
|
|
|
It could be where the usb connects the board - does your r606 have the notch cut out where the usb plugs in? One of mine had an issue and it was the one without the notch. Sidehack replaced/repaired the board and gave me a case with the notch cut out. I am currently running 4 of these with no issues. What are you selling your pod for @gt
It looks like an issue with the port. My cable always seems to stress upwards. Currently have something wedged in to hold the cable level and it seems to have done the trick. Running 625m no issues. As soon as I take the "wedge" out it starts acting up. Ive got one with the notch and an orange/beige PCB. Just finished work so going to investigate further, got some replacement ports coming soon so hoping a port replacement will sort it. Only selling as I'm hoping to grab a couple of Ferrari sticks and only have so much desk real estate to play with. Plus the electricity cost of course. I know im mining at a loss anyway here in the UK but if I can reduce the electricity cost then its obviously better. I have the Gekko Hub and Fan Stand sitting on the shelf from when I had the Newpacs, so its only the sticks I need. Also its sidehacks gear so can run it through cgminer and not have any problems mining to the pool I like  ok so not the notch issue - if it has to be angled up that port is prolly def the issue. good luck at getting it fixed. I think I see yours on ebay its the only one there and its in the UK  And I agree - love sidehacks gear for sure. |
|
|
|
I still need to get a set of your stamps - need 1 of each type |
|
|
|
|
It could be where the usb connects the board - does your r606 have the notch cut out where the usb plugs in? One of mine had an issue and it was the one without the notch. Sidehack replaced/repaired the board and gave me a case with the notch cut out. I am currently running 4 of these with no issues. What are you selling your pod for @gt
|
|
|
|
well having everything you have made so far - you know I am in for this as well. |
|
|
|
|
I can vouch that they are legit having received nearly 50 notes for an group buy order.
|
|
|
|
gotcha, ChiBitCTy. thanks for the reply. all i'm asking for is that my privacy be respected further on, that's it. if anyone here has doubts about my account, please only trade with me through escrow (which is the recommended way to go anyway). also, anyone who's left me a + trust feel free to remove it if you feel like doing so. i don't mind, all i want here is having my own peace lol.
good to see it is you. I only know that you told me you were having issues at one point - we have had nothing but positive interactions so not questioning you per se. |
|
|
|
|
There was a pm I had from them a while back stating they were locked out and trying to regain access - it was from a noobie account.
|
|
|
|
did the COA's ever ship?
Sorry for the late reply, Mopar. As you know, I’ve been traveling with limited internet. However, I read your question just before hitting the road, and I grabbed all the COAs. (I can’t believe it slipped my mind to mail them!) I’ll be mailing them out at the week’s end, but I can give you your COA in person, if you like. (I’ll be heading thru your area on Saturday, so we should meet up for lunch. I’ll PM you details later today.) Thanks, my friend. Chris@TBPCo. Thanks for the update! And yes, that will work spectacularly, we will see you Saturday |
|
|
|
His bids showed lower bid increments. That’s were you are missing here. The obvious
if you are referencing lot 1 - it was starting bid at .001 with increments of .001 - hookzup1 started with .0015 which met the minimum required amount but no one bid further on it so that was the final bid. |
|
|
|
Yes, my bids should be accepted if you sell lot 1. It is the reason I bid that way. This is only way I can see this.
how do you figure? 15 mins before your bids the bids were posted as: Less than 4 hours remain.
Current High Bids:
Lot 1 @ 0.0015 Hookzup1
Lot 2 @ 0.002 Hox
Lot 3 @ 0.003 PeakDK
Lot 4 @ 0.002 JanEmil
Lot 5 @ 0.003 JanEmil
Lot 6 @ 0.003 Hookzup1
Lot 7 @ 0.011 Saxoshi
Lot 8 @ 0.003 Agrawas
Lot 9 @ 0.010 Agrawas
you then bid.
Lot 7 .0115
Lot 8 .0035
Lot 9 .0105
.0115-.011 = .0005 .0035-.003 = .0005 .0105-.01 = .0005 your increments were .0005 - minimum increment was .001 not sure what is being missed here. |
|
|
|
It’s ok. I remember when I first bid on somewhere new here..seems familiar. Oh well. I understand how it works here now. I have seen SO MANY bids accepted like that but MINE WILL NOT BE. Ok. I understand.
if you look a few posts above your "invalid bids" you will see what were the current accepted bids and you had to go up in the valid increments from those - which you did not. |
|
|
|
|
Very nice! That coin has some flaws though
|
|
|
|
lot 9 - 0.009 BTCby the way - looking for another Polymerbit northern cardinal .005 BTC notes - feel free and pm me Also looking for this note - would love just one for the collection. |
|
|
|
|
10 - Mopar Mining, LLC and thank you for the raffle!
|
|
|
|
|
I have the copper one - very tempting to get one of the silver ones. gotta mull it over - great work btw!
|
|
|
|
|
Show Posts
