Man... I don't think $30k is gunna hold...
I hope your magic works just like the last times Be better off with a flash drop to 23 or 24 k. A nice v shape move.. I hate to pull a JJG on you but... King Daddy (aka dee cornz) dont give a ratt's ass what uie-pooie wants. (It can't be a true JJG without some small random text.)But I have a buy the dip set at 23.5k  Apparently, you're set up for DOWNity. But are you also pee-pared for UPpity? #nobot #captcha_me sure I ladder up from 70k to 250k |
|
|
|
Man... I don't think $30k is gunna hold...
I hope your magic works just like the last times Be better off with a flash drop to 23 or 24 k. A nice v shape move.. I hate to pull a JJG on you but... King Daddy (aka dee cornz) dont give a ratt's ass what uie-pooie wants. (It can't be a true JJG without some small random text.)But I have a buy the dip set at 23.5k |
|
|
|
Man... I don't think $30k is gunna hold...
I hope your magic works just like the last times Be better off with a flash drop to 23 or 24 k. A nice v shape move.. |
|
|
|
Man... I don't think $30k is gunna hold...
Yep. |
|
|
|
|
If you have keep power.
A good gear supply.
A good repair guy.
Mining makes money. Or crypto.
It is active income involving work.
Buy and hold is higher risk with higher reward or loss. It is truly passive income.
|
|
|
|
Fourth of July is winding down for me. Diff is up a bit and price is 30.8k. https://www.bitrawr.com/difficulty-estimatorLatest Block: 797237 (14 minutes ago) Current Pace: 102.7630% (918 / 893.32 expected, 24.68 ahead)Previous Difficulty: 52350439455487.47 Current Difficulty: 50646206431058.09 Next Difficulty: between 51632485908164 and 52060049823746 Next Difficulty Change: between +1.9474% and +2.7916% Previous Retarget: last Wednesday at 6:46 PM (-3.2554%) Next Retarget (earliest): July 12, 2023 at 9:44 AM (in 7d 10h 4m 46s) Next Retarget (latest): July 12, 2023 at 12:24 PM (in 7d 12h 45m 34s) Projected Epoch Length: between 13d 14h 57m 56s and 13d 17h 38m 44s Copy stats to clipboard a 100th s19 j pro doing 2900 watts burns about 72 kwatts it earns $7.89 a day pre power, labor, maintenance. so power price cost profit 11 cents = $7.92 3 cents in the red10 cents = $7.20 89 cent profit 09 cents = $6.48 $1.61 profit 08 cents = $5.76 $2.33 profit 07 cents = $5.04 $3.05 profit 06 cents = $4.32 $3.77 profit 05 cents = $3.60 $4.49 profit 04 cents = $2.88 $5.21 profit 03 cents = $2.16. $5.93 profit 02 cents = $1.44 $6.65 profit No-one really has 1 cent power when you add in labor and maintenance it at least a penny buying a used 100th s19j pro for $1200 is possible even less if you shop around So a six cent guy can pay it off in 1000/3.77 to 1200/3.77 or 265 days to 318 days. Just about the ½ ing. a 5 cent guy pays gear off in 222 to 267 days. a 4 cent guy pays gear off in 191 to 230 days. What's all this mean diff is going to go up some. |
|
|
|
|
@mikey I know why its hot 🥵 environment.
I have shifted units it is due to two really stubborn people that don’t want to vent the area just a bit more.
and downclock just a bit more gear.
I am still running 15 L3s that I don’t want to run. burning 🥵 12kwatts to make about 15 usd a day.
I would have sold them a long time ago. But I am outvoted so they will run to the LTC ½ ing.
|
|
|
|
Some fun in the form of a haiku seven poems by me World registers hottest day July third tops all days. https://www.yahoo.com/news/world-registers-hottest-day-ever-155017716.html"By Gloria Dickie Monday, July 3, was the hottest day ever recorded globally, according to data from the U.S. National Centers for Environmental Prediction. The average global temperature reached 17.01 degrees Celsius (62.62 Fahrenheit), surpassing the August 2016 record of 16.92C (62.46F) as heatwaves sizzled around the world. The southern U.S. has been suffering under an intense heat dome in recent weeks. In China, an enduring heatwave continued, with temperatures above 35C (95F). North Africa has seen temperatures near 50C (122F). And even Antarctica, currently in its winter, registered anomalously high temperatures. Ukraine's Vernadsky Research Base in the white continent's Argentine Islands recently broke its July temperature record with 8.7C (47.6F). ..." A haiku poor one Some solid fud for the thread Or is it real facts? BTW Made me laugh a bit. "By Gloria Dickie" Wrote the global warming article.  but she claims to be real person. https://www.gloriadickie.commap of Argentine Antarctica Islands  |
|
|
|
buddy be a slacker <31k |
|
|
|
So I am added back. Looks like I am one month on and one month off for the whole year. A July on. B June no change still off C May off D April on E March off F February on G January on Used to be more stable. Why is there more movement? Btw I like the idea that out of seven months I am on for 4 and off for 3. It disempowers dt1 a bit by having this movement vs a year straight on dt1. |
|
|
|
Well the what's miners can down clock a lot. with freq set to -10% and power set to 3000-3050 I went from 3350 watts on most units down to 2536-2910 So say 2700 on average meaning a savings of 650 x 6 = 3900 watts With 50 units that is 32500 watts saved. That's 110500 btu. With my 6 pieces we did 552 th vs 652 th a drop of 15.3% hash 16200 watts vs 20100 watts a 19.4% power drop So if you play with lower freq you can easy peasy save 100k BTU with 50 units. Going back to doing 10 ac it should cool at best 600k BTU drop that to 540k BTU But the down clock drops you from 597K BTU to 497K BTU So a cooling power of 540k and a heating power of 497K which is a 10% safety factor. After playing with my small hot room since 2018 I know that 10% safety factor may be good most days. Also you can simply shut mining units off. As you see below in the screen shot you would turn 192.168.1.232 off as it pulls the most power and runs the hottest  |
|
|
|
|
buddy is pushing hard to keep above 31k
|
|
|
|
|
Hey buddy let's have a nice bang up rocket candle for the 4th of July. How bout 33333
fuck 32387 or more is good.
When page parity?
|
|
|
|
note edited for clarity : Yeah it breaks the one or two word post rule. But fuck >> you are doing a lot of work to give this to the community. Years ago I ran difficulty thread contests. I gave away over 10 btc. It was a shit ton of time and effort. I always appreciated the kind words of posters. I used your service today. in this post. https://bitcointalk.org/index.php?topic=5458282.msg62499680#msg62499680and it auto reset to correct size. Imgur did not I would always need to do it manually. You did an upgrade that will save all image posters quite a bit of time. |
|
|
|
I down clocked all my whatsminers. I used -10% I used 3050 watts Its 93f today and the room is toasty |
|
|
|
1992 rate was 7.875% 30 years
We paid it off in 7 years. I quit smoking in 1996 so at that time 25 a week for smokes went to pay mortgage down. Homes were cheap in 1992 compared to now.
The mortgage was not too high. So 125 a month x 12 = 1500 a year extra for the mortgage. NJ lets you pay it down without penalty. Our house is over 500k now a nice jump from 144k in 1992.
No that's not nice, its a cost of living increase that is insidious as you pay more in taxes yet if you sell you cannot go anywhere else cheaper. Its a massive scam nationwide to fleece the middle class. Whats worse is its our tax money that was used to buy all our property values up for the benefit of the hedge funds. Before I click on the source I'm like "well that's obviously ChatGPT blah blah blah." ... click, "yup, no surprise, lol."
Be interested to know your prompt though I know what words/names were obviously included in it.
that's literally the joke.  Bitcoin over $30K ??
Oh no, the whales can't have that going on for long.
No no no.
Time to Bart smack it back down in 3...2...1...
Doing their best to scare the sheeple while they accumulate themselves, once the flood gate open put on your goggles. "a 1992 dollar is 2.17 today" from link above so 2.17 x 90k down payment = 195k my home is 540k I spent 18k a year to stay in my home this includes everything. even paying the mortage I would have spent 24k a year in rent and 6k in utilities or 30k a year. so 31 x 12k = 372k saved by owning the home. I am 340k ahead of core inflation rate I am 372k ahead of renting. that's a net of 712k better off. Which is most of my net worth as I am under 1.3 million in worth. Not counting my pensions. Yeah maybe going into the dow in 1992 and renting would have been better. And buying 100 btc for 1200 really would have been better. |
|
|
|
...funny, 2000 is a year I bought my first house using the stock market proceeds for the down-payment...family liked it. Interest rates were 8.5% in a booming market/economy. The total number of $$ that i was supposed to pay over the life of the original loan was shocking, something like 3X of the mortgage value. ....of course, I refinanced a few times with much lower %. @philipma1957...I wonder when you bought yours? 1992 rate was 7.875% 30 years We paid it off in 7 years. I quit smoking in 1996 so at that time 25 a week for smokes went to pay mortgage down. Homes were cheap in 1992 compared to now. The mortgage was not too high. So 125 a month x 12 = 1500 a year extra for the mortgage. NJ lets you pay it down without penalty. Our house is over 500k now a nice jump from 144k in 1992. |
|
|
|
your log will look like the one below this is my s19xp log
[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Tue Nov 29 12:17:10 CST 2022
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] cma: Reserved 16 MiB at 0x000000000f000000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00ef53000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 209572K/262144K available (8764K kernel code, 1194K rwdata, 2424K rodata, 3648K init, 1017K bss, 32092K reserved, 20480K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139034 ( 1018 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008252@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016899@0] Console: colour dummy device 80x25
[ 0.021109@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031586@0] pid_max: default: 32768 minimum: 301
[ 0.036437@0] thread_stack_cache_init, vmap:ffffffc00e5af600, bitmap:ffffffc00e5a3000, cache page:e5e0
[ 0.045773@0] thread_stack_cache_init, allocation vm area:ffffffc00e5d94c0, addr:ffffff8020000000, size:20001000
[ 0.056006@0] cpu 0, vmap_stack:[ffffffc00ef5c960-ffffffc00ef60950]
[ 0.062305@0] cpu 0, irq_stack: [ffffffc00ef53060-ffffffc00ef57050]
[ 0.068604@0] cpu 1, vmap_stack:[ffffffc00ef75960-ffffffc00ef79950]
[ 0.074904@0] cpu 1, irq_stack: [ffffffc00ef6c060-ffffffc00ef70050]
[ 0.081204@0] cpu 2, vmap_stack:[ffffffc00ef8e960-ffffffc00ef92950]
[ 0.087504@0] cpu 2, irq_stack: [ffffffc00ef85060-ffffffc00ef89050]
[ 0.093804@0] cpu 3, vmap_stack:[ffffffc00efa7960-ffffffc00efab950]
[ 0.100104@0] cpu 3, irq_stack: [ffffffc00ef9e060-ffffffc00efa2050]
[ 0.106463@0] Security Framework initialized
[ 0.110697@0] SELinux: Initializing.
[ 0.114389@0] SELinux: Starting in permissive mode
[ 0.114426@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121108@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128836@0] ftrace: allocating 30061 entries in 118 pages
[ 0.186849@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.187663@0] CPU0: update cpu_capacity 1024
[ 0.191991@0] ASID allocator initialised with 32768 entries
[ 0.230125@0] secmon: can't fine clear_range
[ 0.230329@0] EFI services will not be available.
[ 0.233593@0] Meson chip version = RevC (25:C - 23:0)
[ 0.267263@1] Detected VIPT I-cache on CPU1
[ 0.267322@1] CPU1: update cpu_capacity 1024
[ 0.267324@1] CPU1: Booted secondary processor [410fd034]
[ 0.295339@2] Detected VIPT I-cache on CPU2
[ 0.295391@2] CPU2: update cpu_capacity 1024
[ 0.295393@2] CPU2: Booted secondary processor [410fd034]
[ 0.323394@3] Detected VIPT I-cache on CPU3
[ 0.323446@3] CPU3: update cpu_capacity 1024
[ 0.323448@3] CPU3: Booted secondary processor [410fd034]
[ 0.323535@0] Brought up 4 CPUs
[ 0.362758@0] SMP: Total of 4 processors activated.
[ 0.367666@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.373703@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.384255@0] CPU: All CPU(s) started at EL2
[ 0.385441@0] alternatives: patching kernel code
[ 0.390743@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.397969@0] devtmpfs: initialized
[ 0.413008@0] DMI not present or invalid.
[ 0.413418@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.421379@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.427950@0] pinctrl core: initialized pinctrl subsystem
[ 0.434326@0] NET: Registered protocol family 16
[ 0.457908@0] cpuidle: using governor menu
[ 0.458414@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.464009@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.471429@3] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.477539@3] clkmsr: clkmsr: driver init
[ 0.481633@3] aml_watch_point_probe, in, wp:2
[ 0.487051@3] pstore: using zlib compression
[ 0.490460@3] console [pstore-1] enabled
[ 0.493895@3] pstore: Registered ramoops as persistent store backend
[ 0.500300@3] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.514644@3] aml_iomap: amlogic iomap probe done
[ 0.521523@3] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.523453@3] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.615845@3] usbcore: registered new interface driver usbfs
[ 0.616029@3] usbcore: registered new interface driver hub
[ 0.621611@3] usbcore: registered new device driver usb
[ 0.626910@3] pps_core: LinuxPPS API ver. 1 registered
[ 0.631835@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.641244@3] PTP clock support registered
[ 0.645574@3] dmi: Firmware registration failed.
[ 0.650574@3] secmon: reserve_mem_size:0x300000
[ 0.654592@3] secmon secmon: assigned reserved memory node linux,secmon
[ 0.661507@3] secmon: get page:ffffffbf00140000, 5000
[ 0.666212@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.674614@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.682479@3] NetLabel: Initializing
[ 0.684655@3] NetLabel: domain hash size = 128
[ 0.689246@3] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.694474@3] NetLabel: unlabeled traffic allowed by default
[ 0.701115@3] clocksource: Switched to clocksource arch_sys_counter
[ 0.827870@3] VFS: Disk quotas dquot_6.6.0
[ 0.828018@3] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.853884@3] NET: Registered protocol family 2
[ 0.854914@3] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.860161@3] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.866791@3] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.873370@3] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.879336@3] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.886078@3] NET: Registered protocol family 1
[ 0.891031@3] RPC: Registered named UNIX socket transport module.
[ 0.896475@3] RPC: Registered udp transport module.
[ 0.901368@3] RPC: Registered tcp transport module.
[ 0.906256@3] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.915417@3] Unpacking initramfs...
[ 1.517353@0] Initramfs unpacking failed: junk in compressed archive
[ 1.525963@0] Freeing initrd memory: 8688K
[ 1.526892@0] hw perfevents: clusterb_enabled = 0
[ 1.529219@0] hw perfevents: cpumasks 0xf, 0x0
[ 1.533684@0] hw perfevents: cluster A irq = 7
[ 1.538241@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.548317@0] audit: initializing netlink subsys (disabled)
[ 1.551753@0] audit: type=2000 audit(1.408:1): initialized
[ 1.559002@0] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.583254@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.590309@2] NFS: Registering the id_resolver key type
[ 1.590403@2] Key type id_resolver registered
[ 1.594466@2] Key type id_legacy registered
[ 1.598953@2] fuse init (API version 7.26)
[ 1.604285@2] SELinux: Registering netfilter hooks
[ 1.610457@2] NET: Registered protocol family 38
[ 1.610517@2] Key type asymmetric registered
[ 1.613750@2] Asymmetric key parser 'x509' registered
[ 1.619263@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.626464@2] io scheduler noop registered (default)
[ 1.631420@2] io scheduler deadline registered
[ 1.636226@2] io scheduler cfq registered
[ 1.656648@1] random: fast init done
[ 1.656747@1] random: crng init done
[ 1.657278@2] Unable to detect cache hierarchy for CPU 0
[ 1.693492@2] loop: module loaded
[ 1.695061@2] zram: Added device: zram0
[ 1.695507@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.702139@2] libphy: Fixed MDIO Bus: probed
[ 1.706896@2] tun: Universal TUN/TAP device driver, 1.6
[ 1.711241@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.719440@2] ee eth reset:Addr = ffffff80081fd008
[ 1.726948@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.728881@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.734156@2] Ring mode enabled
[ 1.737389@2] DMA HW capability register supported
[ 1.742104@2] Normal descriptors
[ 1.745434@2] RX Checksum Offload Engine supported
[ 1.750328@2] COE Type 2
[ 1.752935@2] TX Checksum insertion supported
[ 1.757419@2] Wake-Up On Lan supported
[ 1.761358@2] Enable RX Mitigation via HW Watchdog Timer
[ 1.774827@2] libphy: stmmac: probed
[ 1.774880@2] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[ 1.781337@2] PPP generic driver version 2.4.2
[ 1.784287@2] PPP BSD Compression module registered
[ 1.788820@2] PPP Deflate Compression module registered
[ 1.794085@2] PPP MPPE Compression module registered
[ 1.799034@2] NET: Registered protocol family 24
[ 1.804507@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.810432@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.817523@2] usbcore: registered new interface driver cdc_acm
[ 1.822683@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.831093@2] usbcore: registered new interface driver usbserial
[ 1.837821@3] mousedev: PS/2 mouse device common for all mice
[ 1.843223@3] usbcore: registered new interface driver xpad
[ 1.848651@2] i2c /dev entries driver
[ 1.853406@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.857642@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.868520@2] ff803000.serial: clock gate not found
[ 1.870212@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.877353@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.892293@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.894999@2] console [ttyS0] enabled
[ 1.902220@2] bootconsole [aml_uart0] disabled
[ 1.911874@0] ff804000.serial: clock gate not found
[ 1.916005@0] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.923124@0] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.933543@3] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 1.939586@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.949828@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 1.956060@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 1.967030@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 1.976386@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 1.982836@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 1.997816@1] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 2.001660@1] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 2.014049@1] aml_dma ff63e000.aml_dma: Aml dma
[ 2.017049@1] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 2.022229@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 2.028563@1] efusekeynum: 4
[ 2.030897@1] efusekeyname: mac offset: 0 size: 6
[ 2.037282@1] efusekeyname: mac_bt offset: 6 size: 6
[ 2.043677@1] efusekeyname: mac_wifi offset: 12 size: 6
[ 2.050105@1] efusekeyname: usid offset: 18 size: 16
[ 2.056921@2] efuse efuse: probe OK!
[ 2.062442@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 2.069623@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 2.074702@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 2.079929@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.125258@0] meson-mmc: meson_mmc_probe() : success!
[ 2.125512@0] amlogic mtd driver init
[ 2.129587@0] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.134333@0] bl mode descrete
[ 2.137212@0] fip_copies 4
[ 2.139876@0] fip_size 0x200000
[ 2.143018@0] nand_clk_ctrl 0xffe07000
[ 2.146740@0] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.152407@0] nand_clk_ctrl 0xffe07000
[ 2.156129@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.164860@0] plat->aml_nand_device ffffff800a005c10
[ 2.169048@0] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.175100@0] NAND device id: 98 da 90 15 76 16
[ 2.179335@0] NAND device: Manufacturer ID:
[ 2.183402@0] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.190966@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.196398@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.201947@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.208193@0] mtd->oobavail: 0x8
[ 2.211590@0] aml_nand_init 2119: plat-name:bootloader
[ 2.216512@0] Creating 1 MTD partitions on "bootloader":
[ 2.221800@0] 0x000000000000-0x000000200000 : "bootloader"
[ 2.230587@2] bootloader initialized ok
[ 2.231061@2] plat->aml_nand_device ffffff800a005c10
[ 2.236040@2] m3_nand_probe() aml_nand_device ffffff800a005c10
[ 2.242171@2] NAND device id: 98 da 90 15 76 16
[ 2.246329@2] NAND device: Manufacturer ID:
[ 2.250405@2] 0x98, Chip ID: 0x98 (Toshiba A revision NAND 2Gib TC58NVG1S3HBAI4 )
[ 2.257975@2] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.263402@2] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.268942@2] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.275194@2] mtd->oobavail: 0x8
[ 2.278673@2] aml_nand_init 2119: plat-name:nandnormal
[ 2.283566@2] bbt_start=20
[ 2.286189@2] env_start=24
[ 2.288853@2] key_start=32
[ 2.291559@2] dtb_start=40
[ 2.294244@2] ddr_start=44
[ 2.296917@2] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.303449@2] get_free_node 43: bitmap=0
[ 2.306901@2] get_free_node 55: bitmap=1
[ 2.311005@2] get_free_node 43: bitmap=1
[ 2.314700@2] get_free_node 55: bitmap=3
[ 2.318804@2] get_free_node 43: bitmap=3
[ 2.322499@2] get_free_node 55: bitmap=7
[ 2.326400@2] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.333070@2] nbbt free list:
[ 2.336018@2] blockN=21, ec=-1, dirty_flag=0
[ 2.340265@2] blockN=22, ec=-1, dirty_flag=0
[ 2.344511@2] blockN=23, ec=-1, dirty_flag=0
[ 2.348759@2] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.354193@2] nbbt valid addr: 280000
[ 2.357427@2] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.363058@2] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.369333@2] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.375774@2] get_free_node 43: bitmap=7
[ 2.379266@2] get_free_node 55: bitmap=f
[ 2.383371@2] get_free_node 43: bitmap=f
[ 2.387066@2] get_free_node 55: bitmap=1f
[ 2.391257@2] get_free_node 43: bitmap=1f
[ 2.395040@2] get_free_node 55: bitmap=3f
[ 2.399230@2] get_free_node 43: bitmap=3f
[ 2.403013@2] get_free_node 55: bitmap=7f
[ 2.407204@2] get_free_node 43: bitmap=7f
[ 2.410986@2] get_free_node 55: bitmap=ff
[ 2.415177@2] get_free_node 43: bitmap=ff
[ 2.418969@2] get_free_node 55: bitmap=1ff
[ 2.423238@2] get_free_node 43: bitmap=1ff
[ 2.427105@2] get_free_node 55: bitmap=3ff
[ 2.431179@2] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.437850@2] nenv free list:
[ 2.440781@2] blockN=25, ec=-1, dirty_flag=0
[ 2.445045@2] blockN=26, ec=-1, dirty_flag=0
[ 2.449291@2] blockN=27, ec=-1, dirty_flag=0
[ 2.453537@2] blockN=28, ec=-1, dirty_flag=0
[ 2.457784@2] blockN=29, ec=-1, dirty_flag=0
[ 2.462030@2] blockN=30, ec=-1, dirty_flag=0
[ 2.466277@2] blockN=31, ec=-1, dirty_flag=0
[ 2.470524@2] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.488597@2] nenv valid addr: 310000
[ 2.488630@2] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.493013@2] get_free_node 43: bitmap=3ff
[ 2.496873@2] get_free_node 55: bitmap=7ff
[ 2.501155@2] get_free_node 43: bitmap=7ff
[ 2.505001@2] get_free_node 55: bitmap=fff
[ 2.509313@2] get_free_node 43: bitmap=fff
[ 2.513166@2] get_free_node 55: bitmap=1fff
[ 2.517530@2] get_free_node 43: bitmap=1fff
[ 2.521486@2] get_free_node 55: bitmap=3fff
[ 2.525850@2] get_free_node 43: bitmap=3fff
[ 2.529806@2] get_free_node 55: bitmap=7fff
[ 2.534171@2] get_free_node 43: bitmap=7fff
[ 2.538124@2] get_free_node 55: bitmap=ffff
[ 2.542490@2] get_free_node 43: bitmap=ffff
[ 2.546446@2] get_free_node 55: bitmap=1ffff
[ 2.550897@2] get_free_node 43: bitmap=1ffff
[ 2.554939@2] get_free_node 55: bitmap=3ffff
[ 2.559186@2] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.565857@2] nkey free list:
[ 2.568787@2] blockN=32, ec=-1, dirty_flag=0
[ 2.573051@2] blockN=33, ec=-1, dirty_flag=0
[ 2.577298@2] blockN=34, ec=-1, dirty_flag=0
[ 2.581544@2] blockN=35, ec=-1, dirty_flag=0
[ 2.585791@2] blockN=36, ec=-1, dirty_flag=0
[ 2.590037@2] blockN=37, ec=-1, dirty_flag=0
[ 2.594284@2] blockN=38, ec=-1, dirty_flag=0
[ 2.598530@2] blockN=39, ec=-1, dirty_flag=0
[ 2.602777@2] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.607890@2] nkey valid addr: fffffffffffe0000
[ 2.612398@2] aml_nand_key_check 1251 NO key exist
[ 2.617166@2] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.623813@2] get_free_node 43: bitmap=3ffff
[ 2.627653@2] get_free_node 55: bitmap=7ffff
[ 2.632104@2] get_free_node 43: bitmap=7ffff
[ 2.636146@2] get_free_node 55: bitmap=fffff
[ 2.640597@2] get_free_node 43: bitmap=fffff
[ 2.644639@2] get_free_node 55: bitmap=1fffff
[ 2.648973@2] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[ 2.655643@2] ndtb free list:
[ 2.658591@2] blockN=41, ec=-1, dirty_flag=0
[ 2.662837@2] blockN=42, ec=-1, dirty_flag=0
[ 2.667084@2] blockN=43, ec=-1, dirty_flag=0
[ 2.671331@2] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.689424@2] ndtb valid addr: 500000
[ 2.689458@2] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.693915@2] get_free_node 43: bitmap=1fffff
[ 2.698043@2] get_free_node 55: bitmap=3fffff
[ 2.702581@2] get_free_node 43: bitmap=3fffff
[ 2.706710@2] get_free_node 55: bitmap=7fffff
[ 2.711043@2] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.717713@2] nddr free list:
[ 2.720645@2] blockN=44, ec=-1, dirty_flag=0
[ 2.724908@2] blockN=45, ec=-1, dirty_flag=0
[ 2.729155@2] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.734272@2] nddr valid addr: fffffffffffe0000
[ 2.738775@2] aml_nand_ddr_check 1281 NO ddr exist
[ 2.743545@2] tpl: off 8388608, size 8388608
[ 2.841170@2] NAND bbt detect factory Bad block at c000000
[ 2.841221@2] aml_nand_add_partition:394 factory bad addr=600
[ 2.846898@2] NAND bbt detect factory Bad block at c020000
[ 2.852407@2] aml_nand_add_partition:394 factory bad addr=601
[ 2.860277@2] NAND bbt detect factory Bad block at c440000
[ 2.863666@2] aml_nand_add_partition:394 factory bad addr=622
[ 2.869431@2] NAND bbt detect factory Bad block at c460000
[ 2.874933@2] aml_nand_add_partition:394 factory bad addr=623
[ 2.912184@2] Creating 6 MTD partitions on "nandnormal":
[ 2.912230@2] 0x000000800000-0x000001000000 : "tpl"
[ 2.923822@1] 0x000001000000-0x000001200000 : "misc"
[ 2.927486@0] 0x000001200000-0x000002200000 : "recovery"
[ 2.939140@3] 0x000002200000-0x000004200000 : "boot"
[ 2.958316@3] 0x000004200000-0x000004700000 : "config"
[ 2.962957@3] 0x000004700000-0x000010000000 : "nvdata"
[ 3.027612@3] NAND bbt detect factory Bad block at c000000
[ 3.027735@3] NAND bbt detect factory Bad block at c020000
[ 3.035308@3] NAND bbt detect factory Bad block at c440000
[ 3.038737@3] NAND bbt detect factory Bad block at c460000
[ 3.078372@1] nandnormal initialized ok
[ 3.078480@1] aml_ubootenv_init: register env chardev
[ 3.082015@2] aml_ubootenv_init: register env chardev OK
[ 3.087066@2] amlnf_dtb_init: register dtb cdev
[ 3.091793@1] amlnf_dtb_init: register dtd cdev OK
[ 3.096238@1] mtd_nand_probe 267 , err = 0
[ 3.101382@2] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 3.106783@2] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 3.113857@1] unifykey: storage in base: 0xffffffc005000000
[ 3.118423@1] unifykey: storage out base: 0xffffffc005040000
[ 3.124032@1] unifykey: storage block base: 0xffffffc005080000
[ 3.129835@1] unifykey: probe done!
[ 3.134018@1] unifykey: no efuse-version set, use default value: -1
[ 3.139546@1] unifykey: key unify config unifykey-num is 6
[ 3.145065@1] unifykey: key unify fact unifykey-num is 6
[ 3.150280@1] unifykey: unifykey_devno: f200000
[ 3.155270@0] unifykey: device unifykeys created ok
[ 3.159795@0] unifykey: aml_unifykeys_init done!
[ 3.164663@0] sysled: module init
[ 3.168134@0] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.172911@0] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.180301@3] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.189032@2] dmc_monitor_probe
[ 3.190751@2] defendkey defendkey: Reserved memory is not enough!
[ 3.195646@2] defendkey: probe of defendkey failed with error -22
[ 3.201961@2] GACT probability NOT on
[ 3.205345@2] Mirror/redirect action on
[ 3.209132@2] u32 classifier
[ 3.211958@2] Actions configured
[ 3.215545@2] Netfilter messages via NETLINK v0.30.
[ 3.220815@2] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.227014@2] ctnetlink v0.93: registering with nfnetlink.
[ 3.232851@2] xt_time: kernel timezone is -0000
[ 3.236605@2] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.243218@2] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.247942@2] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.253412@2] Initializing XFRM netlink socket
[ 3.258920@2] NET: Registered protocol family 10
[ 3.264855@2] mip6: Mobile IPv6
[ 3.265530@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.271434@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.279474@2] NET: Registered protocol family 17
[ 3.281739@2] NET: Registered protocol family 15
[ 3.286318@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.299467@2] l2tp_core: L2TP core driver, V2.0
[ 3.303871@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.308787@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.314544@2] l2tp_netlink: L2TP netlink interface
[ 3.319332@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.325411@2] l2tp_debugfs: L2TP debugfs support
[ 3.329931@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.336582@2] NET: Registered protocol family 35
[ 3.341509@2] Key type dns_resolver registered
[ 3.346118@2] Registered swp emulation handler
[ 3.349974@2] Registered cp15_barrier emulation handler
[ 3.355171@2] Registered setend emulation handler
[ 3.359908@2] disable EAS feature
[ 3.364465@1] registered taskstats version 1
[ 3.380996@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.887440@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.887528@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.895851@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.904259@2] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.911808@1] hub 1-0:1.0: USB hub found
[ 3.914209@1] hub 1-0:1.0: 1 port detected
[ 3.918813@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.923829@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.931725@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.941270@2] hub 2-0:1.0: USB hub found
[ 3.943788@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.951160@2] usb usb2: Unsupported the hub
[ 3.955915@2] aml_vrtc rtc: setting system clock to 2023-06-28 17:11:17 UTC (1687972277)
[ 3.963971@2] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00cd8b800)
[ 3.964049@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.971908@2] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.971920@2] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00d80ce00
[ 4.072610@2] dwc_otg: Core Release: 3.10a
[ 4.072668@2] dwc_otg: Setting default values for core params
[ 4.076856@2] dwc_otg: curmode: 0, host_only: 0
[ 4.081365@2] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 4.093882@2] dwc_otg: Using Buffer DMA mode
[ 4.093921@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 4.097822@2] dwc_otg: Working on port type = SLAVE
[ 4.102680@2] dwc_otg: Dedicated Tx FIFOs mode
[ 4.109871@0] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 4.116381@0] cpucore_cooling_register, max_cpu_core_num:4
[ 4.128499@0] gxbb_pm: enter meson_pm_probe!
[ 4.128557@0] no vddio3v3_en pin
[ 4.130254@0] pm-meson aml_pm: Can't get switch_clk81
[ 4.135290@0] gxbb_pm: meson_pm_probe done
[ 4.140236@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.146599@0] Freeing unused kernel memory: 3648K
[ 4.161421@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.417180@3] ubi0: attaching mtd5
[ 4.436719@3] ubi0: scanning is finished
[ 4.441783@3] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.441907@3] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.448952@3] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.455890@3] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.462983@3] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.469052@3] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.476412@3] ubi0: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 2160011592
[ 4.485692@3] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.494974@1] ubi0: background thread "ubi_bgt0d" started, PID 1075
[ 4.507921@0] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1079
[ 4.545288@2] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.547676@2] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.557746@2] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.568004@2] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.574561@2] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 850C71B0-E02F-42CA-B787-D712148D97DC, small LPT model
[ 4.599159@0] ubi2: attaching mtd6
[ 5.066028@0] NAND bbt detect factory Bad block at c000000
[ 5.066154@0] NAND bbt detect factory Bad block at c020000
[ 5.087067@0] NAND bbt detect factory Bad block at c440000
[ 5.087175@0] NAND bbt detect factory Bad block at c460000
[ 5.322566@0] ubi2: scanning is finished
[ 5.330103@1] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.330404@1] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.337516@1] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.344381@1] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.351476@1] ubi2: good PEBs: 1476, bad PEBs: 4, corrupted PEBs: 0
[ 5.357722@1] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.365082@1] ubi2: max/mean erase counter: 463/59, WL threshold: 4096, image sequence number: 232746352
[ 5.374536@1] ubi2: available PEBs: 0, total reserved PEBs: 1476, PEBs reserved for bad PEB handling: 0
[ 5.383912@3] ubi2: background thread "ubi_bgt2d" started, PID 1086
[ 5.396898@1] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1090
[ 5.441937@0] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdada_log"
[ 5.444234@0] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.454320@0] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.465133@0] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.471893@0] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 20428EE1-271B-42B1-8A17-C7BCA62C81BA, small LPT model
[ 5.734293@1] eth0: device MAC address 02:74:80:9d:19:e2
[ 5.818290@0] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.819560@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.087646@1] uart_trans: loading out-of-tree module taints kernel.
[ 6.090047@1] register uart_trans chrdev success.
[ 6.093456@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 6.101139@1] tty port open success [/dev/ttyS3]!
[ 6.105858@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 6.114108@1] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 6.120262@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 6.127914@1] tty port open success [/dev/ttyS2]!
[ 6.132598@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 6.140977@1] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 6.147109@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 6.154761@1] tty port open success [/dev/ttyS1]!
[ 6.159994@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 6.167834@1] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 6.174296@0] create workqueue success!
[ 7.849387@0] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 7.852676@0] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.550226@0] uart trans dev open.
[ 20.550428@0] uart_buf virt addr = 0xffffffc00ad80000
[ 20.553083@0] uart_buf phys addr = 0x0ad80000
[ 20.557458@0] uart_buf pfn = 0x0000ad80
[ 20.561828@0] uart trans stop send work timer.
[ 20.566421@0] uart trans set chain exist bits:0x7.
[ 20.570963@0] uart trans set work queue count 768.
[ 91.935101@2] uart set baud to: 4098
[ 91.935163@2] uart set baud to: 4098
[ 91.936629@2] uart set baud to: 4098
[ 107.671555@2] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 115200 to 1000000
[ 107.674730@2] uart set baud to: 4104
[ 107.738582@2] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 115200 to 1000000
[ 107.741772@2] uart set baud to: 4104
[ 107.805591@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 1000000
[ 107.808676@2] uart set baud to: 4104
[ 168.459956@3] uart trans start send work timer.
[ 477.537753@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[69428.571392@2] uart trans stop send work timer.
[74672.936381@3] uart trans start send work timer.
[74959.507772@0] uart trans stop send work timer.
[74960.520428@0] uart trans stop send work timer.
[74983.796884@0] uart trans dev open.
[74983.797007@0] uart_buf virt addr = 0xffffffc00ad80000
[74983.799810@0] uart_buf phys addr = 0x0ad80000
[74983.804124@0] uart_buf pfn = 0x0000ad80
[74983.808529@0] uart trans stop send work timer.
[74983.813082@0] uart trans set chain exist bits:0x7.
[74983.817627@0] uart trans set work queue count 768.
[75041.504137@0] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 1000000 to 115200
[75041.507689@0] uart set baud to: 4098
[75041.511075@0] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 1000000 to 115200
[75041.519792@0] uart set baud to: 4098
[75041.523214@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 1000000 to 115200
[75041.531846@0] uart set baud to: 4098
[75057.263794@3] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 115200 to 1000000
[75057.266914@3] uart set baud to: 4104
[75057.330780@0] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 115200 to 1000000
[75057.334131@0] uart set baud to: 4104
[75057.397924@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 1000000
[75057.401145@0] uart set baud to: 4104
[75123.136003@1] uart trans start send work timer.
===========================================Miner log===========================================
2023-06-28 17:11:24 Miner compile time: Tue Nov 29 11:42:05 CST 2022 type: Antminer S19 XP sn :JYZZEAUBBAABI0023
2023-06-28 17:11:26 This is fix-freq version
2023-06-28 17:11:26 Miner compile time: Tue Nov 29 11:42:05 CST 2022 type: Antminer S19 XP
2023-06-28 17:11:26 Miner sn: JYZZEAUBBAABI0023
2023-06-28 17:11:26 commit version: dd076742 2022-10-27 22:42:25, build by: jenkins 2022-11-29 12:03:58
2023-06-28 17:11:26 opt_multi_version = 1
2023-06-28 17:11:26 opt_bitmain_ab = 1
2023-06-28 17:11:26 mid_auto_gen = 1
2023-06-28 17:11:26 opt_bitmain_work_mode = 0
2023-06-28 17:11:26 port 439 already exported
2023-06-28 17:11:26 port 454 already exported
2023-06-28 17:11:26 port 440 already exported
2023-06-28 17:11:26 port 455 already exported
2023-06-28 17:11:26 port 441 already exported
2023-06-28 17:11:26 port 456 already exported
2023-06-28 17:11:26 port 438 already exported
2023-06-28 17:11:26 port 453 already exported
2023-06-28 17:11:26 port 446 already exported
2023-06-28 17:11:26 port 445 already exported
2023-06-28 17:11:26 Note: front fan is power on!
2023-06-28 17:11:26 Note: rear fan is power on!
2023-06-28 17:11:26 start the http log.
2023-06-28 17:11:26 httpListenThread start ret=0
2023-06-28 17:11:26 start listen on 6060 ...
2023-06-28 17:11:26 load machine BHB56801 conf
2023-06-28 17:11:26 machine : BHB56801
2023-06-28 17:11:26 get test_loop_securely_find_asic_num failed
2023-06-28 17:11:26 get mix boardname[0][BHB56801], name:BHB56801
2023-06-28 17:11:26 get mix boardname[1][BHB56802], name:BHB56802
2023-06-28 17:11:26 bad chain id = 3
2023-06-28 17:11:29 bad chain id = 3
2023-06-28 17:11:31 power off
2023-06-28 17:11:32 ==========================capability start==========================
2023-06-28 17:11:32 board num = 3
2023-06-28 17:11:32 board id = 0, chain num = 1
2023-06-28 17:11:32 chain id = 0
2023-06-28 17:11:32 board id = 1, chain num = 1
2023-06-28 17:11:32 chain id = 1
2023-06-28 17:11:32 board id = 2, chain num = 1
2023-06-28 17:11:32 chain id = 2
2023-06-28 17:11:32 ==========================capability end============================
2023-06-28 17:11:32 chain num = 3
2023-06-28 17:11:32 load chain 0 eeprom data
2023-06-28 17:11:33 load chain 1 eeprom data
2023-06-28 17:11:34 load chain 2 eeprom data
2023-06-28 17:11:34 eeprom load ret:0
2023-06-28 17:11:34 miner:BHB56801,board_name:BHB56801
2023-06-28 17:11:34 create thread get_nonce_and_register_thread
2023-06-28 17:11:34 fixed working voltage = 1290
2023-06-28 17:11:34 Chain [0] PCB Version: 0x0220
2023-06-28 17:11:34 Chain [0] BOM Version: 0x0000
2023-06-28 17:11:34 Chain [1] PCB Version: 0x0220
2023-06-28 17:11:34 Chain [1] BOM Version: 0x0000
2023-06-28 17:11:34 Chain [2] PCB Version: 0x0220
2023-06-28 17:11:34 Chain [2] BOM Version: 0x0000
2023-06-28 17:11:34 bad chain id = 3
2023-06-28 17:11:34 Fan check passed.
2023-06-28 17:11:34 init fan pid target=50
2023-06-28 17:11:34 max sensor num = 4
2023-06-28 17:11:34 STATUS_INITED: soc init done!
2023-06-28 17:11:34 temperature_monitor_thread start...
2023-06-28 17:11:51 start to init...
2023-06-28 17:11:51 i2c_sim_init start
2023-06-28 17:11:51 init gpio477
2023-06-28 17:11:51 init gpio476
2023-06-28 17:11:51 i2c_sim_init end
2023-06-28 17:11:53 power open power_version = 0x76
2023-06-28 17:11:56 power is Calibrated
2023-06-28 17:11:56 power sn:DGAH329BBABJE0420
2023-06-28 17:11:56 enable_power_calibration,calibration date:211208.
2023-06-28 17:11:57 power type version: 0x0076
2023-06-28 17:11:58 disable power watchdog: 0x0000
2023-06-28 17:12:01 Initializing the power, please wait, this may take up to 2 minutes...
2023-06-28 17:12:23 reload pool, need recalculate
2023-06-28 17:12:23 set_start_time_point total_tv_start_sys=69 total_tv_end_sys=70
2023-06-28 17:12:31 Slept 30 seconds, diff = 5.
2023-06-28 17:12:41 set_voltage_by_steps to 1500.
2023-06-28 17:12:43 bad chain id = 3
2023-06-28 17:12:46 start up min temp by 75a = 36
2023-06-28 17:12:48 Chain[0]: find 110 asic, times 0
2023-06-28 17:12:51 Chain[1]: find 110 asic, times 0
2023-06-28 17:12:53 Chain[2]: find 110 asic, times 0
2023-06-28 17:12:58 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 4
2023-06-28 17:13:02 fixed frequency is 485
2023-06-28 17:13:02 Bring up temperature is 36
2023-06-28 17:13:02 set uart relay
2023-06-28 17:13:02 set UART baud to 1000000
2023-06-28 17:13:02 create thread check_miner_status_thread
2023-06-28 17:13:02 create thread check_system_work_thread
2023-06-28 17:13:02 create thread inc_freq_matrix_thread
2023-06-28 17:13:02 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 4
2023-06-28 17:13:02 start do_core_reset
2023-06-28 17:13:19 end do_core_reset
2023-06-28 17:13:19 noraml inc freq voltage
2023-06-28 17:13:19 set_voltage_by_steps to 1420.
2023-06-28 17:13:38 set_voltage_by_steps to 1480.
2023-06-28 17:13:40 set_voltage_by_steps to 1460.
2023-06-28 17:13:43 set_voltage_by_steps to 1440.
2023-06-28 17:13:45 set_voltage_by_steps to 1420.
2023-06-28 17:13:48 set_voltage_by_steps to 1400.
2023-06-28 17:13:50 set_voltage_by_steps to 1380.
2023-06-28 17:13:53 set_voltage_by_steps to 1360.
2023-06-28 17:13:55 set_voltage_by_steps to 1340.
2023-06-28 17:13:58 set_voltage_by_steps to 1320.
2023-06-28 17:14:00 set_voltage_by_steps to 1300.
2023-06-28 17:14:03 create thread power_heart_beat_thread
2023-06-28 17:14:03 get board temp:44
2023-06-28 17:14:03 waiting board temp come to 35
2023-06-28 17:14:03 get board temp:44
2023-06-28 17:14:03 Init done!
2023-06-28 17:14:03 STATUS_OKAY
2023-06-28 17:14:03 start the cached job
2023-06-28 17:14:03 Version num 65536
2023-06-28 17:14:03 Mask num 0x1fffe000
2023-06-28 17:14:03 opt_multi_version = 65536, interval timeout = 3188016
2023-06-28 17:14:03 freq = 485, percent = 90, hcn = 5404, timeout = 3188016
2023-06-28 17:14:03 set_start_time_point total_tv_start_sys=169 total_tv_end_sys=170
2023-06-28 17:14:04 enable power watchdog: 0x0001
2023-06-28 17:14:05 set voltage to work voltage
2023-06-28 17:14:05 set_voltage_by_steps to 1290.
2023-06-28 17:43:03 30m avg rate is 135749.88 in 29 mins
2023-06-28 18:13:05 30m avg rate is 136390.09 in 30 mins
2023-06-28 18:13:41 set_voltage_by_steps to 1270.
2023-06-28 18:43:12 30m avg rate is 136624.55 in 30 mins
2023-06-28 18:49:42 set_voltage_by_steps to 1290.
2023-06-28 19:13:08 30m avg rate is 135648.13 in 30 mins
2023-06-28 19:43:10 30m avg rate is 136306.49 in 30 mins
2023-06-28 20:13:12 30m avg rate is 135587.72 in 30 mins
2023-06-28 20:43:13 30m avg rate is 136369.36 in 30 mins
2023-06-28 21:13:15 30m avg rate is 136448.66 in 30 mins
2023-06-28 21:43:17 30m avg rate is 135816.53 in 30 mins
2023-06-28 22:13:19 30m avg rate is 135843.38 in 30 mins
2023-06-28 22:43:20 30m avg rate is 136438.34 in 30 mins
2023-06-28 23:13:22 30m avg rate is 136205.82 in 30 mins
2023-06-28 23:43:24 30m avg rate is 135595.65 in 30 mins
2023-06-29 00:13:26 30m avg rate is 135954.43 in 30 mins
2023-06-29 00:43:27 30m avg rate is 137131.26 in 30 mins
2023-06-29 01:13:29 30m avg rate is 136174.09 in 30 mins
2023-06-29 01:43:31 30m avg rate is 135974.57 in 30 mins
2023-06-29 02:13:33 30m avg rate is 136039.24 in 30 mins
2023-06-29 02:43:34 30m avg rate is 136219.17 in 30 mins
2023-06-29 03:13:36 30m avg rate is 136159.44 in 30 mins
2023-06-29 03:43:38 30m avg rate is 135994.09 in 30 mins
2023-06-29 04:13:40 30m avg rate is 135815.31 in 30 mins
2023-06-29 04:43:41 30m avg rate is 135820.52 in 30 mins
2023-06-29 05:13:43 30m avg rate is 136708.59 in 30 mins
2023-06-29 05:43:45 30m avg rate is 136432.80 in 30 mins
2023-06-29 06:13:46 30m avg rate is 136030.53 in 30 mins
2023-06-29 06:43:48 30m avg rate is 136305.88 in 30 mins
2023-06-29 07:13:50 30m avg rate is 135989.82 in 30 mins
2023-06-29 07:43:52 30m avg rate is 135933.68 in 30 mins
2023-06-29 08:13:53 30m avg rate is 136178.27 in 30 mins
2023-06-29 08:43:55 30m avg rate is 135651.79 in 30 mins
2023-06-29 09:13:57 30m avg rate is 135942.84 in 30 mins
2023-06-29 09:43:59 30m avg rate is 135983.11 in 30 mins
2023-06-29 10:14:00 30m avg rate is 135583.03 in 30 mins
2023-06-29 10:44:02 30m avg rate is 136297.34 in 30 mins
2023-06-29 11:14:04 30m avg rate is 136360.80 in 30 mins
2023-06-29 11:44:06 30m avg rate is 136099.04 in 30 mins
2023-06-29 12:14:07 30m avg rate is 136528.09 in 30 mins
2023-06-29 12:23:45 WARN_NET_LOST: network connection lost
2023-06-29 12:23:45 will power off in 280 seconds in case not resume
2023-06-29 12:28:24 network connection lost for 5 min + 280 seconds, power off...
2023-06-29 12:28:24 ERROR_UNKOWN_STATUS: power off by NET_LOST
2023-06-29 12:28:24 stop_mining: power off by NET_LOST
2023-06-29 12:28:24 uninit_temp_info
2023-06-29 12:28:24 do not read temp anymore...
2023-06-29 12:28:24 cancel thread
2023-06-29 12:28:24 cancel thread
2023-06-29 12:28:24 cancel thread
2023-06-29 12:28:24 ****power off hashboard****
2023-06-29 12:28:24 power off
2023-06-29 12:28:25 temp monitor thread exit
2023-06-29 12:44:10 avg rate is lower than ideal rate, 64704.70 in 30 mins
2023-06-29 12:44:10 30m avg rate is 64704.70 in 30 mins
2023-06-29 12:44:10 chain 0 hash rate 0.00 low in 15 mins
2023-06-29 12:44:10 chain 1 hash rate 0.00 low in 15 mins
2023-06-29 12:44:10 chain 2 hash rate 0.00 low in 15 mins
2023-06-29 13:14:11 avg rate is lower than ideal rate, 0.00 in 30 mins
2023-06-29 13:14:11 30m avg rate is 0.00 in 30 mins
2023-06-29 13:44:12 avg rate is lower than ideal rate, 0.00 in 30 mins
2023-06-29 13:44:12 30m avg rate is 0.00 in 30 mins
2023-06-29 13:55:49 network connection resume, restart after 286 secs
2023-06-29 14:00:35 send msg for restart...
2023-06-29 14:00:35 ERROR_NET_LOST: network connection resume, restart...
2023-06-29 14:00:35 stop_mining_and_restart: network connection resume, restart...
2023-06-29 14:00:35 ****power off hashboard****
2023-06-29 14:00:35 power off
2023-06-29 14:00:36 restart
2023-06-29 14:00:36 ****power off hashboard****
2023-06-29 14:00:36 power off
2023-06-29 14:00:49 Miner compile time: Tue Nov 29 11:42:05 CST 2022 type: Antminer S19 XP sn :JYZZEAUBBAABI0023
2023-06-29 14:00:51 This is fix-freq version
2023-06-29 14:00:51 Miner compile time: Tue Nov 29 11:42:05 CST 2022 type: Antminer S19 XP
2023-06-29 14:00:51 Miner sn: JYZZEAUBBAABI0023
2023-06-29 14:00:51 commit version: dd076742 2022-10-27 22:42:25, build by: jenkins 2022-11-29 12:03:58
2023-06-29 14:00:51 opt_multi_version = 1
2023-06-29 14:00:51 opt_bitmain_ab = 1
2023-06-29 14:00:51 mid_auto_gen = 1
2023-06-29 14:00:51 opt_bitmain_work_mode = 0
2023-06-29 14:00:51 port 439 already exported
2023-06-29 14:00:51 port 454 already exported
2023-06-29 14:00:51 port 440 already exported
2023-06-29 14:00:51 port 455 already exported
2023-06-29 14:00:51 port 441 already exported
2023-06-29 14:00:51 port 456 already exported
2023-06-29 14:00:51 port 438 already exported
2023-06-29 14:00:51 port 453 already exported
2023-06-29 14:00:51 port 446 already exported
2023-06-29 14:00:51 port 445 already exported
2023-06-29 14:00:51 Note: front fan is power on!
2023-06-29 14:00:51 Note: rear fan is power on!
2023-06-29 14:00:51 start the http log.
2023-06-29 14:00:51 httpListenThread start ret=0
2023-06-29 14:00:51 start listen on 6060 ...
2023-06-29 14:00:51 load machine BHB56801 conf
2023-06-29 14:00:51 machine : BHB56801
2023-06-29 14:00:51 get test_loop_securely_find_asic_num failed
2023-06-29 14:00:51 get mix boardname[0][BHB56801], name:BHB56801
2023-06-29 14:00:51 get mix boardname[1][BHB56802], name:BHB56802
2023-06-29 14:00:51 bad chain id = 3
2023-06-29 14:00:54 bad chain id = 3
2023-06-29 14:00:56 power off
2023-06-29 14:00:57 ==========================capability start==========================
2023-06-29 14:00:57 board num = 3
2023-06-29 14:00:57 board id = 0, chain num = 1
2023-06-29 14:00:57 chain id = 0
2023-06-29 14:00:57 board id = 1, chain num = 1
2023-06-29 14:00:57 chain id = 1
2023-06-29 14:00:57 board id = 2, chain num = 1
2023-06-29 14:00:57 chain id = 2
2023-06-29 14:00:57 ==========================capability end============================
2023-06-29 14:00:57 chain num = 3
2023-06-29 14:00:58 load chain 0 eeprom data
2023-06-29 14:00:59 load chain 1 eeprom data
2023-06-29 14:00:59 load chain 2 eeprom data
2023-06-29 14:00:59 eeprom load ret:0
2023-06-29 14:00:59 miner:BHB56801,board_name:BHB56801
2023-06-29 14:00:59 create thread get_nonce_and_register_thread
2023-06-29 14:00:59 fixed working voltage = 1290
2023-06-29 14:00:59 Chain [0] PCB Version: 0x0220
2023-06-29 14:00:59 Chain [0] BOM Version: 0x0000
2023-06-29 14:00:59 Chain [1] PCB Version: 0x0220
2023-06-29 14:00:59 Chain [1] BOM Version: 0x0000
2023-06-29 14:00:59 Chain [2] PCB Version: 0x0220
2023-06-29 14:00:59 Chain [2] BOM Version: 0x0000
2023-06-29 14:00:59 bad chain id = 3
2023-06-29 14:00:59 Fan check passed.
2023-06-29 14:00:59 init fan pid target=50
2023-06-29 14:00:59 max sensor num = 4
2023-06-29 14:00:59 STATUS_INITED: soc init done!
2023-06-29 14:00:59 temperature_monitor_thread start...
2023-06-29 14:01:02 start to init...
2023-06-29 14:01:02 i2c_sim_init start
2023-06-29 14:01:02 i2c_sim_init end
2023-06-29 14:01:05 power open power_version = 0x76
2023-06-29 14:01:08 power is Calibrated
2023-06-29 14:01:08 power sn:DGAH329BBABJE0420
2023-06-29 14:01:08 enable_power_calibration,calibration date:211208.
2023-06-29 14:01:09 power type version: 0x0076
2023-06-29 14:01:10 disable power watchdog: 0x0000
2023-06-29 14:01:11 Initializing the power, please wait, this may take up to 2 minutes...
2023-06-29 14:01:41 Slept 30 seconds, diff = 1.
2023-06-29 14:01:51 set_voltage_by_steps to 1500.
2023-06-29 14:01:54 bad chain id = 3
2023-06-29 14:01:57 start up min temp by 75a = 28
2023-06-29 14:01:59 Chain[0]: find 110 asic, times 0
2023-06-29 14:02:01 Chain[1]: find 110 asic, times 0
2023-06-29 14:02:03 Chain[2]: find 110 asic, times 0
2023-06-29 14:02:08 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 4
2023-06-29 14:02:13 fixed frequency is 485
2023-06-29 14:02:13 Bring up temperature is 29
2023-06-29 14:02:13 set uart relay
2023-06-29 14:02:13 set UART baud to 1000000
2023-06-29 14:02:13 create thread check_miner_status_thread
2023-06-29 14:02:13 create thread check_system_work_thread
2023-06-29 14:02:13 create thread inc_freq_matrix_thread
2023-06-29 14:02:13 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 4
2023-06-29 14:02:13 start do_core_reset
2023-06-29 14:02:30 end do_core_reset
2023-06-29 14:02:30 noraml inc freq voltage
2023-06-29 14:02:30 set_voltage_by_steps to 1500.
2023-06-29 14:02:54 set_voltage_by_steps to 1480.
2023-06-29 14:02:57 set_voltage_by_steps to 1460.
2023-06-29 14:02:59 set_voltage_by_steps to 1440.
2023-06-29 14:03:02 set_voltage_by_steps to 1420.
2023-06-29 14:03:05 set_voltage_by_steps to 1400.
2023-06-29 14:03:08 set_voltage_by_steps to 1380.
2023-06-29 14:03:10 set_voltage_by_steps to 1360.
2023-06-29 14:03:13 set_voltage_by_steps to 1340.
2023-06-29 14:03:16 set_voltage_by_steps to 1320.
2023-06-29 14:03:19 create thread power_heart_beat_thread
2023-06-29 14:03:19 Init done!
2023-06-29 14:03:19 STATUS_OKAY
2023-06-29 14:03:19 start the cached job
2023-06-29 14:03:19 Version num 65536
2023-06-29 14:03:19 get board temp:40
2023-06-29 14:03:19 Mask num 0x1fffe000
2023-06-29 14:03:19 waiting board temp come to 35
2023-06-29 14:03:19 get board temp:40
2023-06-29 14:03:19 opt_multi_version = 65536, interval timeout = 3188016
2023-06-29 14:03:19 freq = 485, percent = 90, hcn = 5404, timeout = 3188016
2023-06-29 14:03:19 set_start_time_point total_tv_start_sys=75125 total_tv_end_sys=75126
2023-06-29 14:03:20 enable power watchdog: 0x0001
2023-06-29 14:03:21 set voltage to work voltage
2023-06-29 14:03:21 set_voltage_by_steps to 1310.
2023-06-29 14:03:25 set_voltage_by_steps to 1300.
2023-06-29 14:03:26 set_voltage_by_steps to 1290.
2023-06-29 14:32:14 30m avg rate is 136112.57 in 28 mins
2023-06-29 15:02:15 30m avg rate is 136605.62 in 30 mins
2023-06-29 15:32:17 30m avg rate is 136332.12 in 30 mins
2023-06-29 16:02:19 30m avg rate is 136385.81 in 30 mins
2023-06-29 16:32:22 30m avg rate is 136138.09 in 30 mins
2023-06-29 17:02:23 30m avg rate is 136230.16 in 30 mins
2023-06-29 17:32:24 30m avg rate is 136289.41 in 30 mins
<snipped it a bit due to size>
Hope this helps you show the log to us. |
|
|
|
A reply of yours, quoted below, was deleted by a Bitcoin Forum moderator. Posts are most frequently deleted because they are off-topic, though they can also be deleted for other reasons. In the future, please avoid posting things that need to be deleted. Seems like it's up in some places and down in others. You can always check a site on https://www.whatsmydns.net, it's pretty useful and much better than https://downforeveryoneorjustme.com, which most people use. Hop on a VPN if it's down for you in one area and you might be able to get through right now. Thanks for the tip, I'll do some more settings, to see if the situation normalizes. I still don't understand how to set the image size in this forum. Is it possible if in talkimg there is a choice of image sizes to be displayed? and this is default setting like code which is shown by default after uploading image
After uploading, and on the embed links page, choose the "BBCode full fix HxW" option.  [img height=168 width=619]https://www.talkimg.com/images/2023/06/30/S4ClN.png[/img] If you want to adjust the size, just change the height and width number. Try to choose a number that is proportional or, if you prefer, define just one of them, so that the image looks good. My short reply was deleted by a mod. The op is giving a large amount of his time and effort to the entire community. So a pat on the back of 2 words is pertinent to the thread. I make zip by saying it. My signature is for the op. I am making an effort to encourage him. I can't say enough how helpful this is to the community. the owner of the website has a poll about Imgur so this is important to the owner. the op is doing something very few have offered to do. Yeah I know short replies are not welcome and can deleted but the mod that did it or the person that reported it simple is missing why the post had value. rant over to the op nice work. thank you for continuing to improve the free service. to the deleter why not pm me and discuss this some more. of note I see a new anonymous donation of 0.0015+ https://www.blockchain.com/explorer/addresses/btc/bc1qhwnncpdd8gfzqwjkk9n052wf7g9mvks3xaa7qaI am glad to see more support for the op. |
|
|
|
|
okay so I have 1 node/wallet done using bitcore 25.
lets go the route that I only want a cold wallet.
I don't want a seed style for back up.
have just 1 copy of core and wallet dat on 1 pc turned off is not acceptable.
So Joyce how would you back up this core offline wallet.
3 clones of the ssd would seem to be good to me.
Or am I missing something.
Lets say
new core
new wallet
new address
pass word to open it.
clone 3 copies.
I know I could just copy wallet.dat
but I rather have 3 copies of the working drive.
or am I over thinking how to safe guard the wallet.
I do not want a hardware wallet.
I guess electrum could be an option
|
|
|
|
|
Show Posts
