Miners update
- srbminer-multi-v0.8.3 (Performance increase heavyhash up to ~20%. Fixed issue with recognising some GPUs on newer drivers (broken since v0.8.1). Reworked hashrate reporting/stats - now reporting average for 1 min / 1 hr / 6 hr / 12 hr)
- teamblackminer-v1.25-cuda11.4 (Added stats for AMD cards. Don't add hashrate when validating dag on AMD. Tiny speedup on NVIDIA. Added a --miningtime to stop mining after num minutes. --timeout function now restarts stratum thread after num seconds without data from pool. Default xintensity on hiveon and binance changed to 24 to reduce stales (AMD))

---

Miners update
- teamblackminer-v1.26-cuda11.4 (Added --lhr-unlock option that can give a +20% boost on nvidia lhr cards with lower power. Reduced duplicate shares on hiveon pool and possibly other ethereum stratum 1.0 pools. Faster reconnect to pool if pool does not resolve or is not available. --xintensity 24 default on ethermine for AMD cards. Fixed memleak in the dag cache code when mining ETH+ZIL)
- wildrig-multi-v0.30.3-beta (Fixed broken 5500/5600/5700 support(introduced in 0.30.2). Implemented heavyhash (nvidia gpu's need some further optimizations))

---

Miners update
- teamblackminer-v1.27-cuda11.4 (Removed OpenCL support for Nvidia devices. Uptime minutes is now accurate. Stratum connect rewritten to solve libcurl error)
- wildrig-multi-v0.30.5-beta (improved heavyhash(Polaris/Vega up to 10%, RDNA/RDNA2 ~2%, Pascal ~90%, Turing/Ampere ~25%). Fixed pool side hashrate for nvidia gpu's on heavyhash. Improved heavyhash on RDNA/RDNA2(up to 10%))

---

Miners update
- nbminer-nebutech-v40.0 (Add -power-limit, -pl for power limitation. Add -cclock for set core clock.Display current LHR value in console summary table and web monitor. -proxy options now support username & password for SOCKS5 proxy. Web monitor changes, delete unused information for dual mining. New options for log control. -log-no-job: turn off the New job line in console. -log-cycle: set to change the cycle of Summary table show in console and log, in seconds. Fix ethash - change CPU share validation to independent thread, lower performance degradation when mining at very low difficulty pools. Fix LHR lock detected failure on some cases)

---

Miners update
- nanominer-v3.4.4 (Improved performance of RandomX (Monero))
- nbminer-nebutech-v40.1 (Fix ethash v40.0 false detected as LHR lock under lastest Nvidia driver versions. Supports future LHR GPU models. Fix AMD ethash crash)
- phoenixminer-v5.9c-rc (Release candidate. Fixed some pool connection issues)
- wildrig-multi-v0.30.6-beta (Beta release. One more round of heavyhash optimizations up to 10% on some cards. Fixed duplicate nvidia gpus on some systems)

---

SimpleMining images update
- SM-i024-5.10.60-1-a20.40-n470.86 (New beta image. Added support for future Navi24 AMD GPUs RX 6400/6500 - only basic support without overclocking. Newest NVIDIA driver with A2000 and A4500 support and some bug fixes)

---

Miners update
- gminer-v2.73 (Added LHR mode support for RTX 3060 GA104. Added option to control LHR tune step size --lhr_autotune_step. Added watchdog mode: reboot system or restart miner --watchdog_mode. Added option to observe rig speed, miner quits if average speed reached limit --min_rig_speed. Added option to control maximal number of parallel DAG generations --dag_gen_limit. Display IP address of pool in statistics report. Restore overclocking after stopping of mining)
- srbminer-multi-v0.8.4 (Performance increase on heavyhash. Fixed display of hashrate while doing gpu auto tune process. Changed GPU temperature to show edge value instead of hotspot)

---

Miners update
- teamblackminer-v1.28-cuda11.4 (Improved performance for AMD cards on ETH+ZIL (dagger cache). Added the possibility to mine to ip adresses directly instead of hostnames. Disable cpu verification with --no-cpu set (default). Fixed Hashrate/W in the stats for opencl rigs. Added --maintainance-wallet adress (Mine to another wallet xx% of the time.))
  Added --maintainance-percent (Set the % chance to use the maintainance-wallet for the whole session.)
  Slower dag generation on --dagintensity 1 to be stable on higher clocks.
  Reduced rejected/invalid shares on the ezil.me and the hiveon.io pool. (+1-4%)
- wildrig-multi-v0.30.9-beta (IMPORTANT removed auto-detection of ssl to avoid problems with some pools(no mining after dev-fee, no reconnect and so on). Fixed low hashrate on heavyhash for AMD gpus with old drivers. Added default parameters for NVIDIA RTX A2000, A3000 and A4000)


[moderator's note: consecutive posts merged]

Dashboard update
- Delayed OC for nvidia can now be turned off if needed in rare cases
- You can now export individual OC settings to new group OC with one click
- Group config selection now shows also notes
- Dashboard is now on own subdomain for better site content building
- Deposit Fee site now looks better and has copy buttons and QR codes
- Speed improvements for website and dashboard (a lot of code refactoring and bug fixes)
- Fixed CTRL+C CTRL+V issues under Firefox

---

Miners update
- lolminer-v1.36a (Fixed bug causing no LHR unlock to normal speed after epoch change. Reverted some LHR kernels from 1.35. These default on RTX 3080 other cards can request this kernels by using --lhrtune wauto or wTuneNumber in case the default is unstable)

---

Miners update
- wildrig-multi-v0.30.2-beta (Support ssl. Slightly faster ghostrider 1-2%)


[moderator's note: consecutive posts merged]

Miners update
- nanominer-v3.4.3 (Improved performance KawPow (Raven) and FiroPow (FIRO) on Nvidia up to 3%)
- t-rex-v0.24.6 (Ethash improved LHR unlocker, LHR tune value increased from 71 to 74 by default. The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters. (ethash, autolykos2) New --lhr-autotune-step-size and --lhr-autotune-interval parameters for finer control of LHR unlock behaviour. (ethash, firopow) Add ETH+FIRO dual mining (use the same OC settings as ETH+RVN) (autolykos2) New --dataset-mode parameter to enable/disable double buffer mode: 1 - single buffer mode, 2 - double buffer mode (default). New --temperature-color-mem parameter to control memory temperature highlighting in console. Fixed ethash RTX 3060 GA104 issue not recognised as an LHR card. Fixed Veriblock mining broken since 0.24.2)
- ADDED MINER teamblackminer-v1.24 for Ethash (Ethereum/Zilliqa), Etchash (Ethereum Classic), Lyra2REv2 (Vertcoin) mining on AMD and NVIDIA. Required one of latest SimpleMining images with newest NVIDIA driver for NVIDIA mining. WARNING: We do not recommend this miner due to fake hashrate. API support with GPU stats in dashboard will be added in next week. For now please use reading REAL statistics data on pool side)

---

Miners update
- t-rex-v0.24.7 (Some bug fixes)

---

Miners update
- lolminer-v1.36 (Improved Ethash & Etchash performance on all Nvidia Turing & Ampere GPUs by 0.3 to 0.7%. Decreased rate of stales on Nvidia Turing & Ampere GPUs. Modified LHR auto tuning to use finer steps (0.2 instead of 1). Also when the miner is more then 2 hours stable on its current settings and a lock appears, the card will unlock again, but the tuning will not be reduced. New parameter --lhrwait n will set the miner to wait n seconds, until the LHR detection and calibration gets active. Allows to wait for systems with delayed memory overclock settings). Fixed potential crash between switching between cached Eth and Zil dag on Nvidia. Fixed bug: Worker name got lost on ezil.me mining pool (since 1.34). Fixed bug causing rare defect shares on LHR cards)
- phoenixminer-v5.9b-beta (Beta release. Show GPU vendor name in list GPUs. Fixed issues with AMD RX6700XT cards with the latest AMD drivers. Fixed issues with AMD Vega and Radeon VII cards on latest drivers. Fixed crash with very old Nvidia drivers (3xx.x). Other fixes and small improvements)


[moderator's note: consecutive posts merged]

Miners update
- bminer-v16.4.8 (Fix bugs when running on Ubuntu 20.04)
- nanominer-v3.4.2 (Significantly improved Ergo (Autolykos2) performance (up to 60%) on AMD Vega 56/64/VII. Slightly improved Ergo (Autolykos2) performance on AMD polaris RX 5xx)
- nbminer-nebutech-v39.7 (LHR mode support new GA104 version of 3060. Ethash turn on LHR mode by default for 3060 v1. Fix ethash fail to detect LHR lock on certain situation. Fix Nvidia GPU power consumption issue on certain rig config. Delete support for sero)
- srbminer-multi-v0.8.2 (Added possibility to preload dataset/s on autolykos2 with --gpu-autolykos2-preload - even on 4Gb cards!. Little faster dataset creation on some GPUs
  Job notifications are now displayed in console less frequently. Reverted autolykos2 kernels for hawaii, tonga and fiji to the ones from ver. 0.7.3. Bug fixes in algorithm switching mode --multi-algorithm-job-mode 3)
- wildrig-multi-v0.30.0-beta (Fixed support different drivers for RDNA/RDNA2 gpu's. Implemented ghostrider)

---

Miners update
- wildrig-multi-v0.30.1-beta (Fixed rejects on ghostrider. Lowered devfee to 1% on ghostrider. Now should support gfx803 (RX550 cards) on newest drivers)

---

Update v1320
- fixed missing GPU model for some rigs with internal AMD GPU onboard
- preparation for next dashboard update

---

Miners update
- lolminer-v1.35 (Ergo: Adjusted all codes mining Autolykos v2 to be ready for the epoch 1 and higher, starting Sunday Nov 7th ~8 am UTC. Ergo: Added ability for all AMD cards to pre-build the next Ergo data set while mining. This is at a cost of slightly slower mining directly after a height change, but generally improves poolside performance. In case you find it unstable the pre-building can be deactivated by using parameter --ergo-prebuild -1 / 0 / 1. Here -1 stands for the cards default, 0 is off, 1 is on. Default is on for all AMD GPUs except GCN1 and Vega generations - those were more stable with the option turned off. The value can be set per card by using a comma separated list of values.
  Ergo: Improved performance of AMD Hawaii generation of chips by about 2%.
  Ethash: Added error correcting tables to check the DAG integrity up to epoch 499 (Early June 2022)
  Ethash: Added option to use the version 1.33 semi-unlocker style - this was more performant for some GDDR6X cards. Use --lhrtune xauto to activate the 1.33 solver style auto tuning and use --lhrtune x to set a predetermined tune value. The 1.33 style solver can be mixed with 1.34+ style solvers by using a comma separated list of values.
  Ethash: Fixed a bug some crashed Nvidia cards did not trigger the watchdog
  Ethash: Fixed a bug causing the worker name not to be correctly passed to the pool in some cases in 1.34(a)
  (1) The new Ergo epochs will increase the size of the data set used for mining by 5% every ~75 days. Some cards might need a bit more core clock to achieve the used performance. Also 2G cards in zombie mode will see a significant reduction in speed, because the data set is more then 2150 MBytes in size now)
- teamredminer-v0.8.6.3 (Autolykos2: emergency release to support larger pad size from block 614400. Some GPUs (mainly Vegas) will need higher core clocks to achieve the same performance as previous versions due to larger pads breaking some previous optimizations. More optimizations to come in future releases.
  Autolykos2: added argument --autolykos_ignore_diff for certain pools that aren't compatible with the ERGO reference miner pool implementation.
  Progpow: fixed wrong --help text for --prog_micro_tune)

---

Miners update
- bminer-v16.4.9 (Improve the performance of Ethereum mining on Ampere GPUs)

---

Miners update
- gminer-v2.71 (Improved LHR performance, added two modes --lhr_mode: 0 - energy save mode, 1 - maximal performance mode (default). Miner display LHR unlock percentage in statistics table (LHR row), you can adjust it by --lhr_tune option. Now --lhr_tune meaning GPU unlock percentage, for compatibility lhr tunes below 10 mapped to new default values. If LHR auto-tune (--lhr_autotune) enabled miner tries increase LHR unlock percentage while mining. Improved RavenCoin performance, fixed floating hashrate. Display maximum difficulty of shares for each GPU)

[moderator's note: consecutive posts merged]

Miners update
- nbminer-nebutech-v39.6 (Ethash LHR mode significant improvement: higher hashrate, more stable LHR unlocking for both -lhr-mode 1 and 2. Default LHR mode changes to -lhr-mode 1 for LHR GPUs. Default values of LHR mode increased, -lhr-mode 1 -> 74, -lhr-mode 2 -> 71. Added options for LHR auto-tuning control: -lhr-reduce-value, -lhr-reduce-time, -lhr-reduce-limit. Ergo also adapts the 3 new LHR options. Add -cmd-output option. Disable SNI extension for ssl connections by default, can be enabled with -enable-sni. Deleted cuckatoo, cuckatoo32 support)

---

Miners update
- lolminer-v1.34a (Added further epochs to the dag correction detection/table. This can resolve issues with defect shares that appeared in 1.34 or earlier with start of epoch 450. Slightly changes internal LHR parameters of 3070 ti & 3080 - we hope to improve stability by this plus a small speedup)

[moderator's note: consecutive posts merged]

Dashboard update
- New options in Advanced Tools: minerprescript and startupscript. Run additional user scripts during rig startup and/or just before miner start. Examples with detailed info are shown in AdvancedTools form in OC settings)

---

Miners update
- phoenixminer-v5.8c (Implemented optimized kernels for AMD RX6600XT. Other fixes and small improvements)
- t-rex-v0.24.5 (autolykos2 Increase pool-side hashrate by 1-4%. Miner now generates the dataset for the next ERGO block before it arrives with a small penalty to reported hashrate, and when the next block does arrive, it immediately starts hashing without losing 1-4 seconds on creating the dataset. Memory requirements are doubled in this mode as the GPU has to hold two memory buffers. If not enough memory on GPU for two datasets, miner  fall back running single buffer mode. Kawpow, Firopow report hashrate to the mining pool. Add --devices-info parameter to list available CUDA devices
  Bug fixes: ethash, autolykos2 LHR lock detection is triggered by short-term hashrate drops, e.g. when turning on the monitor connected to the GPU)

---

Miners update
- nanominer-v3.4.1 (Added Firopow algo for upcoming FIRO hardfork. Supported zombie mode for AMD and Nvidia GPUs)

[moderator's note: consecutive posts merged]

Miners update
- phoenixminer-v5.8b-beta (Beta release. Implemented optimized kernels for AMD RX6600XT. Added support for the latest AMD drivers 21.30. The latest AMD drivers (21.30 and later for Linux) dropped support for the older kernels, so we changed the kernels for AMD Polaris cards to support these new drivers. There is a very small speed improvement (less than 0.1% on average) with the new kernels and the new drivers on Polaris cards. Note that Radeon VII cards will not work with drivers 21.20 or higher - you need to use older drivers for proper operation of these cards. Note that AMD Vega cards will not work with drivers 21.20 or higher. Other fixes and small improvements)
- srbminer-multi-v0.8.1 (Added algos firopow, kawpow, progpow_sero, progpow_veil, progpow_zano, progpow_veriblock, progpow_epic. Small improvements on autolykos2 for RX550 & RX560. Added parameter --gpu-progpow-mode (which progpow program to use), added --gpu-progpow-preload (how many periods to pre-create). Fixed compatibility with p2p-spb.xyz P2P pools. Fixed 'Internet not found' issue on some cases. Changed default value for --max-no-submit-responses from 0 to 5. Renamed --disable-gpu-watchdog to --disable-worker-watchdog. Minor bug fixes. Progpow algos are using single DAG allocation (no split DAG), so you need a driver that allows allocation of large buffers. Dual mine EpicCash Progpow with any other algorithm (ETHASH, ETCHASH, AUTOLYKOS2 ...) Param --gpu-progpow-mode is auto selected, but you can test manually, maybe you find a mode that works better for your GPU)

---

Miners update
- nanominer-v3.3.14 (Update to fulfill Nicehash requirements)
- teamredminer-v0.8.6.2 (Firopow/MTP: added a synthetic algo mtp_firopow that will use the correct algo given the system time and shut down the miner at the time of the Firo fork on Oct 26. Ethash/progpow: split the ethash and progpow algos into separate binaries, mainly for some Vegas that ran into stability issues going from 0.8.5 to 0.8.6. Autolykos2: added support for Tonga. Advanced SSL usage: changed the default SSL behavior to not provide a SNI hostname during handshake. This simplifies running tunnels against TLS/SSL ports on public pools)

---

Miners update
- lolminer-v1.34 (Rework of LHR semi-unlocker. Improved performance of RTX 3060 and 3060 Ti by up to 2%, allowing less core clock. Auto tuning now quicker to reasonable hashrates. Improved stability on found parameters. Found parameters that are hard coded with --lhrtune are now applied within 30 seconds after dag build. --lhrtune now understands the parameter "off" to disable any kind of LHR handling - useful for cards that sometimes trigger the lhr detection although they are non-LHR. Improved compatibility with many current drivers. Recommend 470.74 LHR v2 cards. 460.x drivers might perform up to 0.5% worse. For 3060 LHR V1 use either 460.39 driver. --workmulti now has effect on Nvidia GPUs on Ethash. Default value is 192, lower values will improve stale count, higher values will reduce CPU load. Added support of RTX A6000/A5000/A4000/A2000 Nvidia workstation GPUs. Reduced RAM usage of Nvidia Ethash solver (some 10+ card rigs got issues with 1.33 when they only had 4G RAM). --statsformat now understands the string "lhrinfo" to print the --lhrtune parameter and the lock count in custom set up statistics. Fixed bug with --tstop or a lost stratum connection triggering a LHR GPU to lock. Fixed bug RTX 3070Ti only triggered the lock detector on rather low memory clock. Fixed bug invalid shares in Pitcairn Ergo Zombie mode. Improved stability Ethash stratum and statistics module. Some problems have been reported in ETH in certain 3070Ti, that will be fixed with 1.35. Those miners, please better stay on 1.33 for max perfomance)

[moderator's note: consecutive posts merged]

Miners update
- t-rex-v0.24.2 (Autolykos2 enable LHR unlock functionality. Ethash, autolykos2 add LHR unlock "auto-tune" functionality (enabled by default, see --lhr-autotune-mode). Now the miner will try increasing --lhr-tune if it is stable at the current value, so you'll find out what the maximum LHR tune your cards can sustain without trying a lot of values manually. If you want the miner to stay at the LHR tune value you set yourself no matter what, use --lhr-autotune-mode off. Add ETH+ZIL mining mode with an arbitrary ETH pool (not proxying through a ZIL pool). New parameter --no-new-block-info to stop "new block" messages appearing in miner console. Fixed kawpow hashrate degradation in version 0.24.0 on some configurations)

---

Dashboard update
- improved advanced command list (it is now expanded by default)
- allow rigs button has now option to disable broadcasting your email for new unconfigured rigs in order to be added automatically
- improved network requests behaviour
- multiple dashboard fixes and visual improvements

---

SimpleMining images update
- SM-i021-5.10.60-1-a20.40-n470.74 (Official stable image. Supports all NVIDIA and AMD GPUs including AMD PRO 5600M)
- SM-i022-5.10.60-1-a20.40-n470.74 (New beta image with small fix of AMD RX 5000/6000 series GPU stability. Use this image if you have problems with those GPUs even with using newest stable image)
- Both images are available both in download section and via Reflash Command.

[moderator's note: consecutive posts merged]

Miners update
- teamredminer-v0.8.6 (Firopow: new algo added for Firo's upcoming fork. Only testnet mining is available before the fork. Firopow/kawpow: rewrote tuning guide. Firopow/kawpow: slight hashrate improvements, mainly from choosing full gpu tuning by default and adding a micro-tuning mechanism for Polaris gpus (see --prog_micro_tune). Autolykos2: added high score support and display of submitted share difficulty.Fixed Radeon VII support on recent win drivers. NOTE: HBCC must be DISABLED for all Vegas. Fixed broken fan control for Navis on some driver versions)

---

Miners update
- t-rex-v0.24.0 (LHR unlock dual mining mode: You can now mine ETH (~30% of full speed) and other coins (~70%) simultaneously with LHR cards using their full potential. Available combinations along with memory requirements: ETH+ERGO (8GB+), ETH+RVN (8GB+), ETH+CFX (10GB+). Ethash "standard" LHR unlock changes and improvements: automatically detect LHR cards even if --lhr-tune is not specified, new parameter --lhr-low-power reduces power consumption in LHR mode at a cost of a slightly lower hashrate (start from --lhr-tune 68), change of --lhr-tune scale compared to the version 0.23.2, now it indicates a percentage of the GPU's full hashrate the miner tries to achieve. The old values in the [1-8] range are automatically mapped to the new scale, no configuration change required. Recommended starting LHR tune values: 71 in normal mode, 68 in low power consumption mode (this doesn't apply to dual mode))

[moderator's note: consecutive posts merged]

Miners update
- gminer-v2.70 (Improved auto-tune for LHR GPUs, now miner speedup performance when GPU is steady. Removed --lhr_tune1 / --lhr_tune2 parameters, use --lhr_tune to tune LHR GPUs (value range is -10 - 10, old parameters ignored for compatibility). Display current --lhr_tune value and current kernel in statistics table)

---

Miners update
- nanominer-v3.3.13 (Significantly improved Ergo (Autolykos2) performance (~10%) on Nvidia Turing GPUs (RTX 16xx, RTX 20xx, CMP 30HX). Reduced Ergo (Autolykos2) power consumption on Nvidia GPUs)

[moderator's note: consecutive posts merged]

Miners update
- lolminer-v1.32a (Fixed --mode LHR1 not starting in unlocked state on many systems. Fixed 3060 LHR V1 not starting in semi-unlock when the right drivers are detected)

---

Update v1319
- Added colors in Debug Console
- Fixed console colors for nbminer
- Added wlan interface mac address support if ethernet network card not present

---

Miners update
- lolminer-v1.33 (Better performance of LHR semi-unlock, 70%+ on GDDR6x cards (3070 Ti & 3080 (Ti) ), 71-72%+ on GDDR6 (3060 (Ti) & 3070), 81%+ on 3060 LHR V1 with drivers earlier then 460.39. Recommended driver for LHR v2 is 470.74. Less performance difference between low and high core clock then earlier versions. Cards are automatically detected if they are LHR - no more --mode switch required. In the beginning the miner will calibrate to your exact core & memory clocks. The total process takes 3-4 minutes total, one with rather low speed and the remaining time with speed closer to the final value. Try not to change any overclock after or during calibration, else the performance might be lower then expected! --lhrtune has now default value of auto for an automatic tuning. Results of automatic tuning will be displayed in stats after calibration is completed. Note: re-tuning of values used in 1.32a is required! Default --shortstats interval lowered to 15 seconds, default --longstats interval lowered to 30 seconds. More stable displayed hashrate on Nvidia cards when mining Eth. Fixed bug with processing old style --dualmode etc dualmine settings. Fixed some minor bugs of the API)

[moderator's note: consecutive posts merged]

Miners update
- gminer-v2.69 (Added auto-tune for LHR GPUs (enabled by default, to disable pass --lhr_autotune 0). Increased reconnect tries on connection loss (--reconnect_count). Improved miner stability)
- nbminer-nebutech-v39.5 (Ergo new LHR mode for mining ERGO, enable it by manually adding -lhr option. Same as LHR mode in ethash, -lhr value represents expected hashrate to reach value percent of non-LHR GPU's hashrate, supports comma-seperated list to indicate -lhr value for each GPU, and -lhr -1 to disable. For GPUs with Hynix GDDR6 memory, LHR mode is not recommended for the poor performance. For GPUs with non-Hynix GDDR6 memory, e.g. 3060 3060ti 3070, start trying with -lhr 85. For GPUs with GDDR6X memory, e.g. 3070ti 3080 3080ti, start trying with -lhr 100. When mining lock is detected during ERGO mining, miner will automatically decrease -lhr value by 0.5, and continue mining. max decrease times is 10, which sums to 5.0. Optimized ergo Lower power consumption on Nvidia GPUs)

You're welcome

Yes. I and forgot to add in changelog the most important, that this addon of new definitions allow to OC work giving higher hashrate and much lower power usage on new 6900 GPUs.
For some users (rare cases) may be required rig reboot or even power off rig for a 1 minute for full support of those GPUs after this tiny, but "amazing" update.

---

Miners update
- nanominer-v3.3.12 (Fixed invalid ETH shares on some Nvidia RTX30xx. Added Verthash for AMD. Fixed Raven on Nvidia with 470.57 driver. Warn user if hardware accelerated GPU scheduling is not enabled. Reduced stale shares on Raven. Fixed crash when miner started with some AMD GCN3 and elder GPUs)

---

SimpleMining images update
- SM-i021-5.10.60-1-a20.40-n470.74.img.xz (New Beta image. Fixed support of newest parts of AMD RX 6900 Series GPUs. Support also RX 6600 and AMD PRO 5600M. Image has also newest NVIDIA driver 470.74 which fix some stability issues)

---

Miners update
- t-rex-v0.23.1 (NOTE: this version includes a couple of breaking changes: GPU ordering change. Option --pci-indexing is no longer support. Please remove this option from your miner options to prevent miner not working with next releases. Order GPUs by PCI bus id. You may need to change the settings that relied on GPU order. Multiple bug fixes)

[moderator's note: consecutive posts merged]

Update v1318
- Added new PCI ID AMD RX 6000 series definitions
- Fixed local miner cache on rigs
- Fixed API in latest bminer versions

Miners update
- nbminer-nebutech-v39.4 (Octopus fix error hash issue)

Miners update
- t-rex-v0.22.1 (Ethash added partial LHR unlock for 30xx cards. Add firopow algo for upcoming FIRO hard fork. Kawpow added CPU share validation for all progpow algos. Fixed octopus CFX mining broken in 0.22.0. Fixed Autolykos2 CPU share validation. Fixed switching to failover pools that takes too long. Stability fixes)

---

Please use the newest SimpleMining OS image from download section and then write email to admin@simplemining.net and we checked your issue.

[moderator's note: consecutive posts merged]

Miners update
- nanominer-v3.3.9 (Kawpow performance improvements for Nvidia Pascal, Turing and Ampere GPUs. Improved connection stability for China users Set fan speed option)

---

Miners update
- bminer-v16.4.7 (Support Ethereum mining on AMD RDNA GPUs (e.g. 5700). Enable LHR mode to unlock part of the performance of LHR GPUs (e.g. GTX3060). Improve energy efficiency for Ethereum on the Polaris/Vega architecture. API support in SimpleMining for this version will be fixed in few days. Now can show 0MH/s data)
- gminer-v2.67-beta (Beta release. Partial LHR cards unlock without additional power consumption. Use --lhr 1 to force enable unlock for RTX 3060 V1. Use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock)

---

Miners update
- gminer-v2.67-beta (Stable release. Partial LHR cards unlock without additional power consumption. Use --lhr 1 to force enable unlock for RTX 3060 V1. Use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock. Miner requires latest Nvidia drivers(470+). If your rig has older drivers, reflash manually with newest image from download section or use Command Reflash to live reflash rig)

---

Miners update
- lolminer-v1.32 (Beta Feature: Added RTX 3000 series semi-unlock for LHR v2 cards giving up to 30% more performance then in locked state. Use --mode LHR2 to call it (and --mode LHR1 for 3060 LHR1 cards). Also added a low power LHR mode for V2 cards (--mode LHRLP). Recommended drivers for LHR2 and LHRLP: 470.63.01 or 465.31 - others could be more unstable. Use --lhrtune to improve either performance or stability.  Improved performance of RTX 3060 LHR v1 semi-unlock by 2-3% depending on configuration. Added detection of the "fan glitch" for RTX 3000 LHR cards. When the glitch is detected, the GPUs will leave the special LHR modes automatically. Significantly improved Ergo performance on GCN Gen 1 GPUs (e.g. HD 7970, R9 280, R7 370). Added Ergo kernels for Pitcairn GPUs. New configuration scheme for Et(c)hash + Zil dual mining with dual stratum! When a pool requests a re-connection, the miner will now do so immediately instead of waiting 1 second and no longer say the connection got "lost". Added support for extra nonce subscription on Ergo stratum - this will cause less reconnects on Nicehash. Fixed an issue causing "invalid" shares on Ethash when the pool makes intensive use of variable difficulty (e.g. HiveOn, Nicehash...) Fixed an issue that might cause the epoch to update too late when doing Eth + Zil dual stratum. Fixed an issue causing too much stale or very late shares in Ergo. Updated complete network stack to newer libraries - for more stability. A lot of internal re-structuring and fixes)
- wildrig-multi-v0.29.0-beta (Beta release. Added parameter --protocol(ethproxy, ethstratum, stratum, stratum1, stratum2, ufo, ufo2). Added parameter --no-dag-split. Removed x17r-protocol2(now just use x17r and --protocol ufo2). Implemented dag split for huge DAG files on AMD drivers. Implemented vprogpow(new algo of VeriBlock). Implemented x11k(kyancoin))

---

Miners update
- nanominer-v3.3.10 (Fixed Raven invalid shares for some Nvidia RTX 30xx. Fixed ETH performance tuning for some Nvidia RTX 30xx. Returned launch with command line arguments. Command line version support will be available in SimpleMining in the future. Please use still same method as usual described in miner detailed info)

---

Miners update
- gminer-v2.68 (Detect lock of LHR GPUs, automatically unlock and continue mining. Display of miner restart count by watchdog)

---

Miners update
- nbminer-nebutech-v39.3 (Ethash new low power LHR mode lhr-mode option 2-default 1-old version (same as v39.2) - suitable for only power limit bounded GPU, can achieve higher hashrate than mode 2. Mode 2 is able to achieve lower average power and temperature, espacially suitable for GPUs with gddr6x e.g.3070ti, 3080, 3080ti. Power consumtion is fluctuating in this mode, better be used with locked core clock. -lhr support decimal value. For LHR GPUs, when mining lock is detected, miner will automatically decrease -lhr value by 0.1, and continue mining. Max decrease times is 10, which sums to 1.0. Higher CPU usage when set --share-check 0)

[moderator's note: consecutive posts merged]

Miners update
- srbminer-multi-v0.8.0 (Performance increase on ethash/etchash/ubqhash/verthash/heavyhash for RX6800/6900 GPU's. Fixed cryptonight_gpu/cryptonight_xhv for RDNA/RDNA2 GPU's. Added GPU power consumption details to stats. Minor bug fixes)

---

Miners update
- gminer-v2.66 (Iimproved KAWPOW (Ravencoin) performance under on Nvidia. Added AMD implementation for KAWPOW (Ravencoin). Improved compatibility with Ethash pools)

---

SimpleMining images update
- SM-i019-5.10.60-1-a20.40-n470.63.01 (New Beta image with newest AMD driver with AMD RX 6600 XT and AMD PRO 5600M support)

---

Miners update
- nbminer-nebutech-v39.2 (Ethash added LHR lock detection and recovery in LHR mode. Fix ergo more robust protocol handle)

---

Miners update
- nbminer-nebutech-v39.2-fix (fixed package containing real 39.2 version files. Previous one package with 39.2 version contains 39.1 files because of mistake)

---

Miners update
- Added new miner nsfminer-v1.3.14-cuda11.3 for AMD and NVIDIA Ethereum mining. For NVIDIA mining please reflash rig to newest SimpleMining image if miner not start.  API support will added soon.

---

Miners update
- teamredminer-v0.8.5 (Aded mem temp limits (stop/resume), --mem_temp_limit and --mem_temp_resume. Ethash added support for forcing ethash pool hashrate reports --eth_hash_report. Ethash fixed hashrate reports for Crazypool when using failover pools. Autolykos2  added extranonce subscription support for e.g. Nicehash)

[moderator's note: consecutive posts merged]

Miners update
- nbminer-nebutech-v39.1 (Optimize ethash improve hashrate of LHR mode 1 -2%, default value of -lhrchanges from 68 to 69, manually set to 70 is also very promising. Fix kawpow issue of v39.0)

Miners update
- gminer-v2.65 (fixed floating hashrate reporting appeared in v2.64)