|
Well Facts says that about 98% of hisorty crimes, ethnic, racial, and econimcal and religius crimes has been by the White Race.
Just feels like you want to bash down the black community in a world that is controlled by a White race and keeps destroying the world whiout even caring about the consequence to other races or the planet.
this information is just as bullshit as Christian saying that Their religion never commited ethnic, financial or other type of crimes...
|
|
|
|
I am trying to withdraw some funds, 3000 of Titcoins  and about 20ppc coins but i get wrong code that my adress is invalid.. |
|
|
|
|
i am trying to withdraw but says that that my adress is incorrect....
|
|
|
|
|
How about on a B6 ?.
What could i overclock it whit all 10 pins and 2000bb IBM ?.
|
|
|
|
|
Are the 10 pins needed?
I am hashish 4050 on a b6, whit only 7 Inputs on boars 2x3x2 , and one for controller.
Trying to overlock but i just get alot of HWR even if i underclock....
it's doing like 1100 from the wall whit IBM 2000 BB PSU.
I looked att the board but it only have 3 connections ?
|
|
|
|
|
you have them in denmark ?
|
|
|
|
But the phone looks HORRIBLE
It wouldn't even fit in my pocket
In reality, you can not be distinguished from the original. need use magnifying glass for it. I am sorry man, i've been checking this treadh because i got curious about this expensive luxurious phone. But From the picture it look very cheap plastic case, the speaker "triangle" or what ever it is, is not not even straight it's like falling to the side... Better luck att local store, most on this forums are proffesionals, doctors, enginers and other shit that wouldnt buy a copy from a second hand. If i buy a Replica i rather buy it from the Replicators store than a second hand one ... better luck IRL. |
|
|
|
Replied.
Do the sim cards have anumber to get called?, how to this look and can i choose my own number?- |
|
|
|
Pretty cool. It looks like the you can plug the input into the output so you can do 2 units back-to-back and get 480V to play with.  Three units would give you 960V! 960V!!! And the sickest death of all time. Seriously people, don't get shocked with 240V or more. Instant death is to put it lightly. There's a reason US went with 120V, and while I usually don't agree with lowest common stuff I can see why we went with it. When I was young I walked away with a 120V shock burned but OK. If I was younger and shocked with 240V or more I'd be dead. Dead. Please don't post things when you're not 100% sure of what you're saying. Voltage doesn't kill, amperage does. FYI USA is 240v. It's simply a different "type" of 240v than Europe. I'd even go as far as saying 120v is MORE dangerous than 240v or higher. Getting stuck on live 120v wires can be worse because the low voltage doesn't "blow" you away, you can lose muscle control and stay clamped to the wire until you fry. Higher voltages will have a tendency to knock you back or off the wires more easily. I can back up this, i have had same "accidents" as the guy quoted, and i have got just minor shocks or little burns from 240V putputs, and it has been several times. |
|
|
|
I'm looking for 3 working hash boards from either Batch 1,3, 5 or 6 (600 Mhz).
If you have 1 to 3 boards you could sell, PM me with cost per board.
Do you mean you have dead boards with 162 chips? I'm interested in at least one shipped to France. Offering 250$ for the board. I think he might want to add some extras, kinda interested too in adding more boards to a controller  . |
|
|
|
I never looked for the VRMS modules alone, and wasn't even aware you could buy the things in assembled modules like that. Where did you find them? But 5€ is clearly cheap, even if it was just to get the spare parts for Neptune/Titan. I am no enginer, I understand that this is like some DC/DC step up volt chips or something like that ? did you need some donations for testing purposes ? I am just testing , pretty old but got 1x connection whit free power so i can abuse that for a little while ;S |
|
|
|
|
okej pm me whit your payment link
|
|
|
|
Side note: I re-flowed a new FPGA on this other Neptune board... Test results below:
root@Neptune:/etc/init.d# io-pwr init
TPS65217 OK. Modification A, revision 1.1
root@Neptune:/etc/init.d# program-fpga spimux.rbf
dd: can't open 'spimux.rbf': No such file or directory
ERROR: CONFIG_DONE != 1 when nCONFIG is HIGH
root@Neptune:/etc/init.d# program-fpga /usr/bin/spimux.rbf
82+1 records in
82+1 records out
root@Neptune:/etc/init.d#
I think I can officially fix a rainy day. That's 2 for 2 on the controller boards.
OK as a project to test WITHOUT A CUBE...assuming one can get a clone titan bridge (i have one on order) and supposedly a JUPITER OCT controller with 4 ports also works ..I also have that...and a spare LCD screen from Titan controller (have 6 on a controller 2 on other titans controller) and of course put the Firmware for Titan on SD card and I have a 'supposed' correct Raspberry PI B+ 512mb as well So ...assuming my bravery factor can be 'pushed' up somewhat on this ...(donations? naw people don't go donations for stupid) anyway I take 4 port oct knc Jupiter board....put clone bridge on it.....put raspberry pi on that....add the tarky titan firmware on the SD ...pop the LCD in (not sure what port does it matter) and then just simply SEE if the LCD at least shows Tarky Titan and looks like its looking for a cube...and ie be able to IP into it via putty and GUI and showing NO cubes would that be a good first step before the 'virgin sacrifice' of a even 1 die working Titan cube or some such on this project? or again ..did i 'miss the memo' and this is not possible on anything say but a Neptune card or nov only knc Jupiter card and not my oct Jupiter 4 port card..and/or the actual fpga on the titan orig card is different and not loaded not sure of my bravery factor on the above but just asking if such a scenario would tell the tale? Again with the 'cloned titan bridge' coming...have all the parts staring at me above I dont think this should be aproblem. But i did read that someone have alreaady tried this whit KNC SHA256 boards and have failed, would be possible whit some hardware modification. On this treadh someowere i think i did read that somone took a R-pi from titan whit bridge to a Neptune board, but The Board is unable to find the cubes. I do not remeber who did this but should be somewere if you look around |
|
|
|
2 usd piece, november boards. How many pieces do you want?
10x  Click to enlarge50 euro + shipping costs and they are yours. 10eu is thie shipping ?. i can offer 30eu +shiupping for them Go to your local market and buy there for 3 euro piece.   Damn man dont you got some room for haggle? , i am offering that because is what i've seen them going for in here on the forums 20x for about 30usd + shipping... I just need for some testing purpose i can do 50eu if you include shipping ... |
|
|
|
2 usd piece, november boards. How many pieces do you want?
10x 50 euro + shipping costs and they are yours. 10eu is thie shipping ?. i can offer 30eu +shiupping for them |
|
|
|
2 usd piece, november boards. How many pieces do you want?
10x |
|
|
|
Seeking knc boards.
a lot for the cheaps. Bitmain psu for s7.  |
|
|
|
Were in sweden? |
|
|
|
|
this are supposed to work how many controllers per board is needed? vice versa.
i might intereseted in about 10ths , maybe to much?.
what heatsinks would fit ?
Pm me for more details. my electricity is very cheap, at this pricez it is intereseting . regards
|
|
|
|
Ok, so, the "30C" resistor is the 20k reference one. " and one of the "123" resistor allows you to output 10.6v. divided by 15 chips in a string = 0.71v at the chips Edit: not "123"(12k), but there should be a 1.2k resistor or close value. 1.1k resistor in place of the 1.2k will give 0.77v at the chips 1.3k resistor will give 0.65v at the chips 18k resistor in place of the 20k should also work for 0.64v at the chips 22k resistor in place of the 20k will give 0.77v at the chips Edit, I'm aging, took me 20 minutes to figure the over/undervolt. I am just working from the available pictures, but just to say that I agree with all of the above including the fact that I cannot find the approx 1.2K resistor which is needed from pin 2 on the LM27402 to ground as the bottom part of the potential divider? I have a possible solution which is that U3 on the other side of the board, which in the pictures I cannot read the ident, is a Digital Pot, perhaps set up from the pads on the edge of the board, which would enable a value & hence the voltage to be set? Bit of a wild guess and could be for something completely different but easy to check if someone has a board out of a system. Also uncertain about U2 marked AG30, is this an LDO & if so what is it for? Also note that the Bitmain pictures show a V1 without U3 and that Batch 6 is V2 & Batch 8 a V3 Board Rich Changing the 20k for 16k and 22k resistors didn't change anything to the hashing capabilities  All 3 blades are still working at 800MHz. All those heatsinks aren't helping to trace the circuits. I need to look deeper into this once I have more time available yo man . areyou trying to verlocko about the capacitieS? would be cool if you could get like 10thz- Btw i wrote to you , i <m intesreste on a ibm 2800w psu |
|
|
|
|
Show Posts
