Miners update
- t-rex-v0.24.2 (Autolykos2 enable LHR unlock functionality. Ethash, autolykos2 add LHR unlock "auto-tune" functionality (enabled by default, see --lhr-autotune-mode). Now the miner will try increasing --lhr-tune if it is stable at the current value, so you'll find out what the maximum LHR tune your cards can sustain without trying a lot of values manually. If you want the miner to stay at the LHR tune value you set yourself no matter what, use --lhr-autotune-mode off. Add ETH+ZIL mining mode with an arbitrary ETH pool (not proxying through a ZIL pool). New parameter --no-new-block-info to stop "new block" messages appearing in miner console. Fixed kawpow hashrate degradation in version 0.24.0 on some configurations)

---

Dashboard update
- improved advanced command list (it is now expanded by default)
- allow rigs button has now option to disable broadcasting your email for new unconfigured rigs in order to be added automatically
- improved network requests behaviour
- multiple dashboard fixes and visual improvements

---

SimpleMining images update
- SM-i021-5.10.60-1-a20.40-n470.74 (Official stable image. Supports all NVIDIA and AMD GPUs including AMD PRO 5600M)
- SM-i022-5.10.60-1-a20.40-n470.74 (New beta image with small fix of AMD RX 5000/6000 series GPU stability. Use this image if you have problems with those GPUs even with using newest stable image)
- Both images are available both in download section and via Reflash Command.

[moderator's note: consecutive posts merged]

Miners update
- teamredminer-v0.8.6 (Firopow: new algo added for Firo's upcoming fork. Only testnet mining is available before the fork. Firopow/kawpow: rewrote tuning guide. Firopow/kawpow: slight hashrate improvements, mainly from choosing full gpu tuning by default and adding a micro-tuning mechanism for Polaris gpus (see --prog_micro_tune). Autolykos2: added high score support and display of submitted share difficulty.Fixed Radeon VII support on recent win drivers. NOTE: HBCC must be DISABLED for all Vegas. Fixed broken fan control for Navis on some driver versions)

---

Miners update
- t-rex-v0.24.0 (LHR unlock dual mining mode: You can now mine ETH (~30% of full speed) and other coins (~70%) simultaneously with LHR cards using their full potential. Available combinations along with memory requirements: ETH+ERGO (8GB+), ETH+RVN (8GB+), ETH+CFX (10GB+). Ethash "standard" LHR unlock changes and improvements: automatically detect LHR cards even if --lhr-tune is not specified, new parameter --lhr-low-power reduces power consumption in LHR mode at a cost of a slightly lower hashrate (start from --lhr-tune 68), change of --lhr-tune scale compared to the version 0.23.2, now it indicates a percentage of the GPU's full hashrate the miner tries to achieve. The old values in the [1-8] range are automatically mapped to the new scale, no configuration change required. Recommended starting LHR tune values: 71 in normal mode, 68 in low power consumption mode (this doesn't apply to dual mode))

[moderator's note: consecutive posts merged]

Miners update
- gminer-v2.70 (Improved auto-tune for LHR GPUs, now miner speedup performance when GPU is steady. Removed --lhr_tune1 / --lhr_tune2 parameters, use --lhr_tune to tune LHR GPUs (value range is -10 - 10, old parameters ignored for compatibility). Display current --lhr_tune value and current kernel in statistics table)

---

Miners update
- nanominer-v3.3.13 (Significantly improved Ergo (Autolykos2) performance (~10%) on Nvidia Turing GPUs (RTX 16xx, RTX 20xx, CMP 30HX). Reduced Ergo (Autolykos2) power consumption on Nvidia GPUs)

[moderator's note: consecutive posts merged]

Miners update
- lolminer-v1.32a (Fixed --mode LHR1 not starting in unlocked state on many systems. Fixed 3060 LHR V1 not starting in semi-unlock when the right drivers are detected)

---

Update v1319
- Added colors in Debug Console
- Fixed console colors for nbminer
- Added wlan interface mac address support if ethernet network card not present

---

Miners update
- lolminer-v1.33 (Better performance of LHR semi-unlock, 70%+ on GDDR6x cards (3070 Ti & 3080 (Ti) ), 71-72%+ on GDDR6 (3060 (Ti) & 3070), 81%+ on 3060 LHR V1 with drivers earlier then 460.39. Recommended driver for LHR v2 is 470.74. Less performance difference between low and high core clock then earlier versions. Cards are automatically detected if they are LHR - no more --mode switch required. In the beginning the miner will calibrate to your exact core & memory clocks. The total process takes 3-4 minutes total, one with rather low speed and the remaining time with speed closer to the final value. Try not to change any overclock after or during calibration, else the performance might be lower then expected! --lhrtune has now default value of auto for an automatic tuning. Results of automatic tuning will be displayed in stats after calibration is completed. Note: re-tuning of values used in 1.32a is required! Default --shortstats interval lowered to 15 seconds, default --longstats interval lowered to 30 seconds. More stable displayed hashrate on Nvidia cards when mining Eth. Fixed bug with processing old style --dualmode etc dualmine settings. Fixed some minor bugs of the API)

[moderator's note: consecutive posts merged]

Miners update
- gminer-v2.69 (Added auto-tune for LHR GPUs (enabled by default, to disable pass --lhr_autotune 0). Increased reconnect tries on connection loss (--reconnect_count). Improved miner stability)
- nbminer-nebutech-v39.5 (Ergo new LHR mode for mining ERGO, enable it by manually adding -lhr option. Same as LHR mode in ethash, -lhr value represents expected hashrate to reach value percent of non-LHR GPU's hashrate, supports comma-seperated list to indicate -lhr value for each GPU, and -lhr -1 to disable. For GPUs with Hynix GDDR6 memory, LHR mode is not recommended for the poor performance. For GPUs with non-Hynix GDDR6 memory, e.g. 3060 3060ti 3070, start trying with -lhr 85. For GPUs with GDDR6X memory, e.g. 3070ti 3080 3080ti, start trying with -lhr 100. When mining lock is detected during ERGO mining, miner will automatically decrease -lhr value by 0.5, and continue mining. max decrease times is 10, which sums to 5.0. Optimized ergo Lower power consumption on Nvidia GPUs)

You're welcome

Yes. I and forgot to add in changelog the most important, that this addon of new definitions allow to OC work giving higher hashrate and much lower power usage on new 6900 GPUs.
For some users (rare cases) may be required rig reboot or even power off rig for a 1 minute for full support of those GPUs after this tiny, but "amazing" update.

---

Miners update
- nanominer-v3.3.12 (Fixed invalid ETH shares on some Nvidia RTX30xx. Added Verthash for AMD. Fixed Raven on Nvidia with 470.57 driver. Warn user if hardware accelerated GPU scheduling is not enabled. Reduced stale shares on Raven. Fixed crash when miner started with some AMD GCN3 and elder GPUs)

---

SimpleMining images update
- SM-i021-5.10.60-1-a20.40-n470.74.img.xz (New Beta image. Fixed support of newest parts of AMD RX 6900 Series GPUs. Support also RX 6600 and AMD PRO 5600M. Image has also newest NVIDIA driver 470.74 which fix some stability issues)

---

Miners update
- t-rex-v0.23.1 (NOTE: this version includes a couple of breaking changes: GPU ordering change. Option --pci-indexing is no longer support. Please remove this option from your miner options to prevent miner not working with next releases. Order GPUs by PCI bus id. You may need to change the settings that relied on GPU order. Multiple bug fixes)

[moderator's note: consecutive posts merged]

Update v1318
- Added new PCI ID AMD RX 6000 series definitions
- Fixed local miner cache on rigs
- Fixed API in latest bminer versions

Miners update
- nbminer-nebutech-v39.4 (Octopus fix error hash issue)

Miners update
- t-rex-v0.22.1 (Ethash added partial LHR unlock for 30xx cards. Add firopow algo for upcoming FIRO hard fork. Kawpow added CPU share validation for all progpow algos. Fixed octopus CFX mining broken in 0.22.0. Fixed Autolykos2 CPU share validation. Fixed switching to failover pools that takes too long. Stability fixes)

---

Please use the newest SimpleMining OS image from download section and then write email to admin@simplemining.net and we checked your issue.

[moderator's note: consecutive posts merged]

Miners update
- nanominer-v3.3.9 (Kawpow performance improvements for Nvidia Pascal, Turing and Ampere GPUs. Improved connection stability for China users Set fan speed option)

---

Miners update
- bminer-v16.4.7 (Support Ethereum mining on AMD RDNA GPUs (e.g. 5700). Enable LHR mode to unlock part of the performance of LHR GPUs (e.g. GTX3060). Improve energy efficiency for Ethereum on the Polaris/Vega architecture. API support in SimpleMining for this version will be fixed in few days. Now can show 0MH/s data)
- gminer-v2.67-beta (Beta release. Partial LHR cards unlock without additional power consumption. Use --lhr 1 to force enable unlock for RTX 3060 V1. Use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock)

---

Miners update
- gminer-v2.67-beta (Stable release. Partial LHR cards unlock without additional power consumption. Use --lhr 1 to force enable unlock for RTX 3060 V1. Use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock. Miner requires latest Nvidia drivers(470+). If your rig has older drivers, reflash manually with newest image from download section or use Command Reflash to live reflash rig)

---

Miners update
- lolminer-v1.32 (Beta Feature: Added RTX 3000 series semi-unlock for LHR v2 cards giving up to 30% more performance then in locked state. Use --mode LHR2 to call it (and --mode LHR1 for 3060 LHR1 cards). Also added a low power LHR mode for V2 cards (--mode LHRLP). Recommended drivers for LHR2 and LHRLP: 470.63.01 or 465.31 - others could be more unstable. Use --lhrtune to improve either performance or stability.  Improved performance of RTX 3060 LHR v1 semi-unlock by 2-3% depending on configuration. Added detection of the "fan glitch" for RTX 3000 LHR cards. When the glitch is detected, the GPUs will leave the special LHR modes automatically. Significantly improved Ergo performance on GCN Gen 1 GPUs (e.g. HD 7970, R9 280, R7 370). Added Ergo kernels for Pitcairn GPUs. New configuration scheme for Et(c)hash + Zil dual mining with dual stratum! When a pool requests a re-connection, the miner will now do so immediately instead of waiting 1 second and no longer say the connection got "lost". Added support for extra nonce subscription on Ergo stratum - this will cause less reconnects on Nicehash. Fixed an issue causing "invalid" shares on Ethash when the pool makes intensive use of variable difficulty (e.g. HiveOn, Nicehash...) Fixed an issue that might cause the epoch to update too late when doing Eth + Zil dual stratum. Fixed an issue causing too much stale or very late shares in Ergo. Updated complete network stack to newer libraries - for more stability. A lot of internal re-structuring and fixes)
- wildrig-multi-v0.29.0-beta (Beta release. Added parameter --protocol(ethproxy, ethstratum, stratum, stratum1, stratum2, ufo, ufo2). Added parameter --no-dag-split. Removed x17r-protocol2(now just use x17r and --protocol ufo2). Implemented dag split for huge DAG files on AMD drivers. Implemented vprogpow(new algo of VeriBlock). Implemented x11k(kyancoin))

---

Miners update
- nanominer-v3.3.10 (Fixed Raven invalid shares for some Nvidia RTX 30xx. Fixed ETH performance tuning for some Nvidia RTX 30xx. Returned launch with command line arguments. Command line version support will be available in SimpleMining in the future. Please use still same method as usual described in miner detailed info)

---

Miners update
- gminer-v2.68 (Detect lock of LHR GPUs, automatically unlock and continue mining. Display of miner restart count by watchdog)

---

Miners update
- nbminer-nebutech-v39.3 (Ethash new low power LHR mode lhr-mode option 2-default 1-old version (same as v39.2) - suitable for only power limit bounded GPU, can achieve higher hashrate than mode 2. Mode 2 is able to achieve lower average power and temperature, espacially suitable for GPUs with gddr6x e.g.3070ti, 3080, 3080ti. Power consumtion is fluctuating in this mode, better be used with locked core clock. -lhr support decimal value. For LHR GPUs, when mining lock is detected, miner will automatically decrease -lhr value by 0.1, and continue mining. Max decrease times is 10, which sums to 1.0. Higher CPU usage when set --share-check 0)

[moderator's note: consecutive posts merged]

Miners update
- srbminer-multi-v0.8.0 (Performance increase on ethash/etchash/ubqhash/verthash/heavyhash for RX6800/6900 GPU's. Fixed cryptonight_gpu/cryptonight_xhv for RDNA/RDNA2 GPU's. Added GPU power consumption details to stats. Minor bug fixes)

---

Miners update
- gminer-v2.66 (Iimproved KAWPOW (Ravencoin) performance under on Nvidia. Added AMD implementation for KAWPOW (Ravencoin). Improved compatibility with Ethash pools)

---

SimpleMining images update
- SM-i019-5.10.60-1-a20.40-n470.63.01 (New Beta image with newest AMD driver with AMD RX 6600 XT and AMD PRO 5600M support)

---

Miners update
- nbminer-nebutech-v39.2 (Ethash added LHR lock detection and recovery in LHR mode. Fix ergo more robust protocol handle)

---

Miners update
- nbminer-nebutech-v39.2-fix (fixed package containing real 39.2 version files. Previous one package with 39.2 version contains 39.1 files because of mistake)

---

Miners update
- Added new miner nsfminer-v1.3.14-cuda11.3 for AMD and NVIDIA Ethereum mining. For NVIDIA mining please reflash rig to newest SimpleMining image if miner not start.  API support will added soon.

---

Miners update
- teamredminer-v0.8.5 (Aded mem temp limits (stop/resume), --mem_temp_limit and --mem_temp_resume. Ethash added support for forcing ethash pool hashrate reports --eth_hash_report. Ethash fixed hashrate reports for Crazypool when using failover pools. Autolykos2  added extranonce subscription support for e.g. Nicehash)

[moderator's note: consecutive posts merged]

Miners update
- nbminer-nebutech-v39.1 (Optimize ethash improve hashrate of LHR mode 1 -2%, default value of -lhrchanges from 68 to 69, manually set to 70 is also very promising. Fix kawpow issue of v39.0)

Miners update
- gminer-v2.65 (fixed floating hashrate reporting appeared in v2.64)

Miners update
- nbminer-nebutech-v39.0 (Ethash New LHR mode for ETH mining on RTX 30 series LHR GPUs, able to get ~70% of maximum unlocked hashrate. This mode can be tuned by argument -lhr, only works for ethash right now. -lhr default to 0, meaning even if -lhr is not set, LHR mode with -lhr 68 will be applied to LHR GPUs if certain GPUs are detected. Tune LHR mode by setting -lhr <value>, a specific value will tell miner try to reach value percent of maximum unlocker hashrate, e.g. -lhr 68 will expect to get 68% of hashrate for same model non-LHR GPU. Higher -lhr value will results in higher hashrate, but has higher possibility to run into lock state, which will leads to much less hashrate. A good start tuning value is 68, which has been tested to be stable on most rig configurations. -lhr value can be set for each GPU by using comma separeted list, -lhr 65,68,0,-1, where -1 means turn off LHR mode)
- xmrig-v6.14.1 (Refactoring: stable (persistent) algorithms IDs)

Miners update
- t-rex-v0.21.6 (Autolykos2 improved compatibility with mining pools. Fixed command line parameter --worker that does not take precedence over the one specified in the config file. Fixed broken --fork-at functionality)
- xmrig-v6.14.0 (Added ZeroMQ support for solo mining. Fixed crash in DMI memory reader. Added missing --huge-pages-jit command line option. Added show the number of transactions in pool job)

---

SimpleMining images update
- SM-i018-5.4.107-6-a20.40-n470.63.01 (New Beta image with AMD RX 6600 XT support)

---

Miners update
- nanominer-v3.3.8 (Fixed incorrect shares on some XMR jobs due to wrong blob length)

[moderator's note: consecutive posts merged]

Miners update:
- gminer-v2.64 (Performance improvements for Ethash on Nvidia 20xx/30xx. Fixed zombie mode for Ravencoin)

Miners update:
- srbminer-multi-v0.7.9 (Fixed hashrate regression on heavyhash for Navi cards)

---

Miners update:
- phoenixminer-v5.7b-beta (Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused. Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023) Implemented full hardware control for AMD RX6900/6800/6700 cards. Note that with these cards you need to specify relative core voltage: e.g. -cclock -50 will set the core voltage to be 50 mV under the default value. Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with drivers 20.45 and later but the performance will be lower than with the older PAL drivers and kernels. We recommend using AMD driver 20.30 for all cards except RX6900/6800/6700. Fixed an issue causing crashing with some RX6900/6800/6700 cards (there is no need to run these cards with -clkernel 0 anymore). Added support for AMD drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20) Numerous other fixes and small improvements)

[moderator's note: consecutive posts merged]

Miners update:
- miniz-v1.8y4rc1-beta (Improved stability for mining locked GPUs while mining ETH. Fixed rejected shares on 3060s. If you get many invalid, and are overclocking, it may be usefull to use the option --dag-fix. Added --nohttpheaders to remove http headers from getstat api)

---

Miners update:
- t-rex-v0.21.5 (Add --pl parameter for GPU power limit management support. Fixed autolykos2 duplicate share issue)

[moderator's note: consecutive posts merged]

Miners update:
- gminer-v2.61 (Added --contest_wallet parameter. Details on project website https://github.com/develsoftware/GMinerRelease/releases/tag/2.61)

---

Miners update:
- gminer-v2.62 (Fixed performance degradation on mining edition Nvidia GPUs when using memory tweaks (appears in 2.61, reboot required))

---

SimpleMining images update:
- SM-i017-5.4.107-6-a20.40-n470.57.02 (New stable image with newest NVIDIA driver with CMP 30/50/70/90 HX Series support)

---

Miners update:
- teamredminer-v0.8.4 (Emergency patch: fixed Haven mining generating mostly hw errs after the recent hard fork)

---

Miners update:
- gminer-v2.63 (Fixed periodic miner restarts)
- srbminer-multi-v0.7.8 (Added algo circcash. Performance increase on heavyhash 15-25%. Added --gpu-manual-tuning for real time editing of memory timings. Added --log-file-mode. Fixed auto setup on Ethash for Navi/Navi2 cards that broke in previous version. Removed devfee for randomwow, bl2bsha3, eaglesong, k12, kadena, minotaur)

[moderator's note: consecutive posts merged]

Dashboard update:
- Filters have now alphabetical order
- Fixed saving page scroll position
- Fixed refreshing rig list after clearing search field
- Fixed ability to set 0 in power stage and NaN problem after switching from NV to AMD
- Fixed graph with user balance