@Lion BItcoin Shop:
Getting to 71 W is not impossible but achievable by Trixx and WattTool- that's what I used - just adjust the GPU voltage slider while watching GPU-Z GPU Load, Memory controller load and GPU Power Draw. If PC froze on you, or memory controller load just droppeed , you hit the limit, so tweak accordingly In fact you can go under 70W if you underclock more, but I set my target to 28 Mh/s with reasonable power draw.
Last, remember evey card is different from the other, even they are same brand/model/lot, so some may require less/more voltage .
how much the percentage you undervolt ? -25% ? my hashsrate only can reach 22mhs at 70watt powerdraw gpu z :/
|
|
|
photo storageHow Low Can You Go??? HAhahahahahahahaha and this is from DUAL MINING!!!! DAMN THAT'S VERY LOW POWER DRAW. can you share your rom ? currectly im running rx 470 4gb at 28mhs+300mhs sia coin, i have polor and saphire too. I dont remember my setting much ... will look it up on my logs and get back to you ... i had it running 390watt for 4 cards + mobo off the wall. Funny thing is that I am living in the tropics and weather are at constant 31 - 33 C at day time with mid humidity and this rig was not hot in anyway even its not in any AC enviroment. https://ip.bitcointalk.org/?u=https%3A%2F%2Fs16.postimg.org%2Fuyc9lfgud%2Fh_EALTHY.jpg&t=569&c=Yb1EcIZ8XazqHA ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) been running few days without any issue... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) why you not share your rom ?
|
|
|
i get problem like this ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi.imgur.com%2FmkTKa.jpg%26t%3D569%26c%3DoUY1Y0O6kaHZlg&t=663&c=zWFm0QTxCH2Y-A) source : https://bitcointalk.org/index.php?topic=102890.0this is happen in my computer, my spec : 1. mobo B150 k4/d3 2. psu fsp aurum 700w 80+ 3. polor red devil rx 470 4gb 4. corei5 6500 5. ram 4gb the psu and motherboard is still safe for use it again? or what can i do with it ?
|
|
|
@Lion BItcoin Shop and @s3000s You can find sony87' original rom here: https://forum.ethereum.org/discussion/10299/470-nitro-4-gb-elpida-memoryTwo things: First 470's seem to have a hardlock on 2100 Mhz RAM -my Nitro cards behave like they could blast through that limit with ease. Does anyone know how to remove the 2100 Mhz limit? Second> Cards can push both to 31800 Mh/s with curent bios and higher tweaks, bit unstable tho, but I dont like the power draw on them -unless you have free electricity. If I could remove the 2100 Mhz hard limit on RAM than I could get even higher rate. Till then, I'm undervolting/underclocking for better rate with lowest power draw Get low: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi63.tinypic.com%2Fsqrrxt.png&t=663&c=4xDY90NQpz5XIw) Next step: more tweaks less draw Edit> last two cards are 470s how much you undervolt your vga till get 71watt powerdraw? it's seem imposible, i have tried it more but if i undervolt the hashrate will be down too, currently my setting 28mhs with 114watt powerdraw. can you share how to get 71watt without making the hashrate down?
|
|
|
Legalitasnya harus jelas gan, terus menurut ane sebelum mulai dari investor2 jauh kenapa gak coba cari investor2 deket dulu gan yang satu kota gitu.
Kalau projectnya meyakinkan pasti yang minat gabung di kota itu banyak kok, istilahnya cari nama dulu. Kiranya udah sukses dan banyak testi ane yakin nanti banyak yang join.
Terus perhatiin juga alat2 miningnya, sekarang diff btc udah susah dan pendinginan untuk mesinnya, perawatan mesinnya, dll. Semakin jelas dan rinci semakin banyak mengundang investor.
jujur kemaren ada seseorang (temen) yang nawarin 100jt buat project ane, tapi ane pending dulu, ane mo coba dengan modal sendiri dulu, ada kisaran 30jt, ntar liat perkembangane, soal legalitas keknya itu susash juga soale ane blm ada rencana untuk legalitas, blm ada SDM yang ngurusi perpajaknya. Mendingan pakai modal sendiri kalau ada hasilnya bisa nikmatin sendiri nanti kalau memang sudah berkembang dan terpercaya bakalan banyak investor yg tertarik mau ikutan invest. yups sementara jualan alat mining aja om.. hehe soale blm berani ngambil resiko
|
|
|
kaerna stok 287 habis maka sekarang ganti ke skylake Z170 detail spec : -mobo z170 -procie dual core -ram 1keping 4gb -ssd 64gb - 7x VGA (RX 470refference) - power supply 1200/1700watt pure sesuai stock yang ada - custom casing - kabel2 (PCIE) sementara hanya tersedia di windows 10 saja gambar hanya ilustrasi, kemungkinan besar sama dengan itu. https://www.tokopedia.com/bitcoinshop/custom-rig-ethereum-mining-196mhs-ddr4-skylake-pre?n=1via bitcoin ? rate menyesuaikan vip.bitcoin.co.id + 1% fee wd
|
|
|
For all the haters on Elpida memory out there: Featuring RX 470 Nitro 4Gb: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi63.tinypic.com%2Fszeccp.jpg&t=663&c=ZesmiHKlvXXmVA) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi63.tinypic.com%2Fvqmm8l.jpg&t=663&c=sPZTUn-1e1g5CA) EDIT: This is sporting sony87 ROM so all the credit goes to him! i have tried to push the vram to 2020 but i get blank screen, my stable hashrate 28mhs +300sia at 1950mz vram. can you share your rom? please
|
|
|
just asking, are you have plan to make claymore pro version ? so i can mining use claymore without pay 1%
|
|
|
how to reduce the stale shares 73 (92%) 6 (8%)
|
|
|
photo storageHow Low Can You Go??? HAhahahahahahahaha and this is from DUAL MINING!!!! DAMN THAT'S VERY LOW POWER DRAW. can you share your rom ? currectly im running rx 470 4gb at 28mhs+300mhs sia coin, i have polor and saphire too.
|
|
|
anyone get problem to conect pool with claymore? i can't connect my claymore after update my win 10 ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) the firewall off, and the security system is off too
|
|
|
Legalitasnya harus jelas gan, terus menurut ane sebelum mulai dari investor2 jauh kenapa gak coba cari investor2 deket dulu gan yang satu kota gitu.
Kalau projectnya meyakinkan pasti yang minat gabung di kota itu banyak kok, istilahnya cari nama dulu. Kiranya udah sukses dan banyak testi ane yakin nanti banyak yang join.
Terus perhatiin juga alat2 miningnya, sekarang diff btc udah susah dan pendinginan untuk mesinnya, perawatan mesinnya, dll. Semakin jelas dan rinci semakin banyak mengundang investor.
jujur kemaren ada seseorang (temen) yang nawarin 100jt buat project ane, tapi ane pending dulu, ane mo coba dengan modal sendiri dulu, ada kisaran 30jt, ntar liat perkembangane, soal legalitas keknya itu susash juga soale ane blm ada rencana untuk legalitas, blm ada SDM yang ngurusi perpajaknya.
|
|
|
Anyone have saphire nitro Rx 470 8gb version? im buying 1 but im not see any good rom for try it, any tutor for using polaris editor?
|
|
|
i think my setting is better than you have, im runing 28,4mhs + 313 sia coin, 115watt gpu z ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) running for more than 7hours without any issue Fantastic Job! I'm stuck at 27.4+300. No watt measures done yet. I'm with Sapphire nitro+ 470 4Gb, what about you ? nitro 470 4gb this is my setting http://s13.postimg.org/jeh1mpsrr/screenshotdd.jpg
|
|
|
mostly stable for me ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) RX 480 8gb reff Rx 470 4gb nitro Care to share the nitro bios and polaris/wattman screen? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks mate, very nice results, do you know what is your consumption@wall? I'm using this bios to get around 28 mh/s also https://forum.ethereum.org/discussion/9533/28mh-470oc-nitro-4gb-boysie-rom-dual-mining/p1Works pretty well but you have to set the dcri to a specific value to really get that numbers. I managed to get 29.2 mhs + 450 decred/sia getting the mem to 2060@1.15 and core to 1260@1100 trying to use your setting but i get the blue screen, seem imposible, are you increase the voltage? power limit + ? Your mileage may vary, after a while my setting wasn't stable enough anyways, depended too much on the power limit, etc. etc., i'm currently on 1300@default voltage clock and 2000@default voltage mem and it's pretty stable on 27.5, i'll wait until i find some way to correctly manage voltages under linux and the fine tune to see if i can get 28 stable, i don't have power consumption issues so i prefer better speeds. i think my setting is better than you have, im runing 28,4mhs + 313 sia coin, 115watt gpu z ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) running for more than 7hours without any issue
|
|
|
I would like to thank custom work XFX RX480 non-reference GPU's modded BIOS by Eliovp (Heliox) 6X GPU 182Mh/s, 63watt/gpu GPUz and stable more than 1 week (continuous operation 0-24) So perfect job and perfect finish!!! Thank you Eliovp ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) can you point me to the .rom File? I'm sorry but this .rom custom work! So not public share please send me the link via PM
|
|
|
gan saya minat PSU Enermax Platimax 1700W seken harganya sesuai di thread aja (1jt) via escrow moderator bitrent atau dbshck ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) atau mau via bukalapak ane siap. beratnya 2kg kan?
|
|
|
update stock silahkan dipilih -dipilih, kapan lagi bisa beli VGA via bitcoin ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
mostly stable for me ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) RX 480 8gb reff Rx 470 4gb nitro Care to share the nitro bios and polaris/wattman screen? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks mate, very nice results, do you know what is your consumption@wall? I'm using this bios to get around 28 mh/s also https://forum.ethereum.org/discussion/9533/28mh-470oc-nitro-4gb-boysie-rom-dual-mining/p1Works pretty well but you have to set the dcri to a specific value to really get that numbers. I managed to get 29.2 mhs + 450 decred/sia getting the mem to 2060@1.15 and core to 1260@1100 trying to use your setting but i get the blue screen, seem imposible, are you increase the voltage? power limit + ?
|
|
|
|