My stats average 6 gpu rig rx480: ETH: 170 Zec: 1600 XMR: 4500 Auto exchange is set to bitcoin. Software screens: Type: {AMD, NVIDIA} Miner Algorithm Speed BTC/Day BTC/GH/Day Pool ----- --------- ----- ------- ---------- ---- Claymore Ethash 170 MH/s 0.00790 0.04665 MiningPoolHub Type: AMD Miner Algorithm Speed BTC/Day BTC/GH/Day Pool ----- --------- ----- ------- ---------- ---- Claymore Equihash 2 KH/s 0.00825 5,227.95492 MiningPoolHub <---- curent mining, giving most profit (auto switching ON) Claymore Cryptonight 5 KH/s 0.00769 1,694.09777 MiningPoolHub As I said before it's ~ 0.008 BTC by software What I get from the pool is much less now. That's the question could I estimate at least ~0.007-8 BTC with no downtimes ? Did you actually run it for 24 hours or have you just opened it after being down for hours? I've fixed that bug in the new version as it giving to much weighting the first reading. What does the 'MiningPoolHub_Equihash_Profit.txt' contain? 5,227 BTC/GH/Day sounds about right to me for a daily average but it will be static for a few hours if it is that bug. You can calculate it yourself: 1.57 KH/s x 5,227 BTC/GH/Day = 0.00825 BTC (I know it says 2 KH/s on the software because it's rounded; is fixed in the next version. )
|
|
|
Hi, BTC/Day ~ 0.008 for 170Mh Ok lets see how it goes today Tnx for the reply, can we expect version 2.4 today?
PS ETH 170mh(6 gpu rig) - 0.4208989 - from web dashboard
Apologies about they delays. I noticed a bug so I'll have another go tonight. The estimates change like every 5 minutes. I'm hoping that 24 hour actual figures are added at some point to MiningPoolHub.
|
|
|
Hello. New user on pool. Please confirm numbers (seems low a bit ETH 170mh(6 gpu rig) - 0.42089892(4 eur) per 24h? MultiPoolMiner shows ~0.008BTC(6.7 eur) per 24h MultiPoolMiner is not accurate or pool issue? Are you mixing up the BTC/Day and BTC/GH/Day? They don't match on your post. The MultiPoolMiner figures are taken from the pool. MultiPoolMiner also makes use of 24 average but stable pools like Ethereum are mostly live. Where are you getting the figures from as there are no 24 hour stats available?
|
|
|
i was benchmarking on 2 computers but i have this [01:12:49] Press any key to exit, or cgminer will try again in 15s. [01:13:04] Pool 0 JSON stratum auth failed: (null) [01:14:04] No servers were found that could be used to get work from. [01:14:04] Please check the details from the list below of the servers you have input [01:14:04] Most likely you have input the wrong URL, forgotten to add a port, o have not set up workers [01:14:04] Pool: 0 URL: http://stratum+ssl://hub.miningpoolhub.com:17016 User carlo_0000.rx-470x6 Password: x [01:14:04] Press any key to exit, or cgminer will try again in 15s. [01:14:19] Pool 0 JSON stratum auth failed: (null) i notice it try connect with ssl? how to remove that ? Is that the issue? You can edit 'reorder.txt' in the miners folder. I don't appear to be getting that error message; although it may not support ssl, it doesn't break it. BTW, I'll release v2.4 once the windows release of sgminer-gm 5.5.5 is available for download. They had some issues compiling.
|
|
|
Is there a way to 'delete' algos? E.g. I have no interest in mining scrypt or x11 coins. Will deleting the kernel files be sufficient?
I doubt they will be most profitable after benchmarking but you can edit the files in the 'miners' folder for any adjustments like deleting algorithms. There is no simple filter at the moment.
|
|
|
Update was already installed.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder. Miner works well if i start it directly from the miner folder (Any of the Claymore miner). There is more than just claymore. As I said, remove the miners that are crashing your machine out of the folder called 'miners'. I Did test that... zecminer windows pops up and computer crashes. The is nothing else than Claymore file in the miners folder. Also is there a way to re-benchmark? If I add change gpu(s). I will add zcash miner 11.1 when I finally upload MultiPoolMiner 2.4 as a release but you can update the zec miner manually in the bin folder if that helps. (Hopefully upload tonight after I check it's working correctly now; will mark as a pre-release though. ) It's dynamic enough to adjust to small changes in performance but if you add a whole graphics card then you'll want to delete the stats files.
|
|
|
Update was already installed.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder. Miner works well if i start it directly from the miner folder (Any of the Claymore miner). There is more than just claymore. As I said, remove the miners that are crashing your machine out of the folder called 'miners'.
|
|
|
Update was already installed.
Now it started the program and miner from start.bat but computer crashed immediately when mining started...really weird.
It doesn't really make much sense. If your computer is crashing then that's something else again. MultiPoolMiner can't possibly crash your computer directly; must be related to one of the miners running on your machine. Check your drivers and/or do a clean install of windows. If you know what miner is crashing your machine then you could just take it out of the 'miners' folder.
|
|
|
aaronsace, I tryied multipoolminer last night, but too many problems/error to keep it going... First it keeps asking me time to time "Confirm Are you sure you want to perform the Stop-Process operation on the following item: (2616)? &Yes Yes to &All &No No to A&ll &Suspend" and i get loads of different errors like .. PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server" Invoke-WebRequest : Unable to connect to the remote server At MultiPoolMinerV2\Include.ps1:202 char:24 + ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExcep tion + FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand Invoke-WebRequest : Unable to connect to the remote server At MultiPoolMinerV2\Include.ps1:202 char:24 + ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExc eption + FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
You cannot call a method on a null-valued expression. At MultiPoolMinerV2\Include.ps1:203 char:13 + $Data = ($Request.Content.Substring($Request.Content.Inde ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull You cannot call a method on a null-valued expression. At MultiPoolMinerV2\Include.ps1:203 char:13 + $Data = ($Request.Content.Substring($Request.Content.Inde ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression. At MultiPoolMinerV2\Include.ps1:204 char:16 + if($Request.Content.Contains("ETH:")) + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull You cannot call a method on a null-valued expression. At MultiPoolMinerV2\Include.ps1:204 char:16 + if($Request.Content.Contains("ETH:")) + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull
Cannot index into a null array. At MultiPoolMinerV2\Include.ps1:213 char:13 + [Decimal]$Data[4].Split(";")[0]*$Multiplier + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : NullArray Cannot index into a null array. At MultiPoolMinerV2\Include.ps1:213 char:13 + [Decimal]$Data[4].Split(";")[0]*$Multiplier + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : NullArray
PS>TerminatingError(Invoke-WebRequest): "Unable to connect to the remote server" Invoke-WebRequest : Unable to connect to the remote server At MultiPoolMinerV2\Include.ps1:202 char:24 + ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExcep tion + FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand Invoke-WebRequest : Unable to connect to the remote server At MultiPoolMinerV2\Include.ps1:202 char:24 + ... $Request = Invoke-WebRequest "http://$($Server):$Port" -UseBasicPars ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (System.Net.HttpWebRequest:HttpWebRequest) [Invoke-WebRequest], WebExc eption + FullyQualifiedErrorId : WebCmdletWebResponseException,Microsoft.PowerShell.Commands.InvokeWebRequestCommand
You cannot call a method on a null-valued expression. At MultiPoolMinerV2\Include.ps1:203 char:13 + $Data = ($Request.Content.Substring($Request.Content.Inde ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull You cannot call a method on a null-valued expression. At MultiPoolMinerV2\Include.ps1:203 char:13 + $Data = ($Request.Content.Substring($Request.Content.Inde ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull
You cannot call a method on a null-valued expression. At MultiPoolMinerV2\Include.ps1:204 char:16 + if($Request.Content.Contains("ETH:")) + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull You cannot call a method on a null-valued expression. At MultiPoolMinerV2\Include.ps1:204 char:16 + if($Request.Content.Contains("ETH:")) + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull
Cannot index into a null array. At MultiPoolMinerV2\Include.ps1:213 char:13 + [Decimal]$Data[4].Split(";")[0]*$Multiplier + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : NullArray Cannot index into a null array. At MultiPoolMinerV2\Include.ps1:213 char:13 + [Decimal]$Data[4].Split(";")[0]*$Multiplier + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidOperation: (:) [], RuntimeException + FullyQualifiedErrorId : NullArray
PS>TerminatingError(Invoke-WebRequest): "The request was aborted: Could not create SSL/TLS secure channel."
I Can start the script in windows 7 from start.bat but in 8.1 it doesn't work...althought in 8.1 it works directly from script. PS. I did delete everything else but Claymore from Miners folder Sorry, your message is a bit convoluted. Please do a fresh download then click 'start.bat' then send the log file.
MultiPoolMiner shouldn't ask you anything or throw any errors but look out for popup windows blocking every miner. If it does then show me the first instance because that's where the problem starts (still send the log file).I don't think anybody has used windows 8 as the upgrade to windows 10 is free. Have you tried just downloading the same update as windows 7? https://www.microsoft.com/en-us/download/details.aspx?id=50395Do let me know if that worked.
|
|
|
look like it cannot run multipoolminer.ps1
i decide to test on other computer so tested 2 x windows 7 64, same story but win 10 64 there i was able to run it
so something missing on my windows7 ?
I can't read what it says but you mentioned 'windows 7' so do this. "If you have Windows 7, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=50395"
|
|
|
If we use the -type switch can you make it so that the unnecessary miners are not downloaded e.g. ccminers?
There are some planned design changes that are needed for skipping downloads to be implemented, it probably won't make it into v2.4 but it the next version.
|
|
|
Ok so I tried to do the initial start with start.bat and it won't work that way unless you run the powershell script first. A readme could probably help with this confusion. Some of the cpu miners are crashing on benchmarking but this is a low powered machine so I don't think my cpu has the right extensions. However, this can't be good, for benchmarking sgminer was using the cpu at the same time as cpuminer_x64_sse2
I was not aware of the 'start.bat' issue and nobody else has reported it. I've tested by downloading it from the site and running 'start.bat' but I can not reproduce the error. If you have more information, please post it here: https://github.com/aaronsace/MultiPoolMiner/issues/The issue with the cpu miners is a non-issue; it's working correctly. If you don't want to bother with cpu mining, take it out of the bat file.
|
|
|
aaronsace, can you tell us where/how to edit worker names? I see the parameters in MultiPoolMiner.ps1 and I tried to edit those but I messed some stuff up. Looking at it right now I see WorkerName but how can I edit the AMD/NVIDIA/CPU or SSL only etc? I'm only interested in AMD so I'm assuming if I edit it the right way MultiPoolMiner won't download the unnecessary miners?
edit, for some reason I thought this downloaded the necessary miners upon first run...I guess not
The command line option to change the worker name is '-WorkerName'. Check the 'start.bat' file for an example. Where possible, miners download on first use otherwise they are included (see the 'bin' folder). ok thanks. fyi -workername isn't in the start.bat Obviously one can add it but that's where my confusion came from. Ah, will add it on for ease Glad you got it working.
|
|
|
Hey aaronsace, I ran your multipoolminer last night on my rx 480 and it went great. Great job and thank you. The only issue I had was that during benchmarking, the x11 script for amd gpu ran for like 2 hours without stopping. Perhaps it was not finding any shares. I closed out the miner manually and it worked fine.
I would love if the program tested i values as well but I think it might be a waste of time. Claymore dual mining ethash+siacoin seems to utilize the gpu a lot more efficiently than sgminer etc. Also, does the benchmark values for Claymore mining take devfee of 2% into account?
Also like that you can do both cpu and gpu mining at the same time.
Cheers for creating such a useful program. So much more transparent than nicehash.
It trys to wait for an accurate reading but obviously 2 hours is wrong. I'm rewriting the benchmarking and hash rate reading so I may add a timeout. Losses are not currently included at the moment, only profits; it's on my to-do but needs some thought. Would like the actual 24 hour readings for MiningPoolHub to be included in the calculations but it's not available yet.
|
|
|
aaronsace, can you tell us where/how to edit worker names? I see the parameters in MultiPoolMiner.ps1 and I tried to edit those but I messed some stuff up. Looking at it right now I see WorkerName but how can I edit the AMD/NVIDIA/CPU or SSL only etc? I'm only interested in AMD so I'm assuming if I edit it the right way MultiPoolMiner won't download the unnecessary miners?
edit, for some reason I thought this downloaded the necessary miners upon first run...I guess not
The command line option to change the worker name is '-WorkerName'. Check the 'start.bat' file for an example. Where possible, miners download on first use otherwise they are included (see the 'bin' folder).
|
|
|
Hello , i m trying your pool since this morning, on XMR , just try to set up wallet ... but surprise i can't log my kraken adress can you please had exchange adress ?
Sorry but your English is not clear. What are you trying/wanting to do? The normal setup for this pool is to enter a single wallet address on the type of coin that you use (i.e. BTC) then set that coin as the 'auto exchange' coin on MiningPoolHub so everything is exchanged and sent to that wallet no matter what you mine.
|
|
|
Maybe you think I've said something bad. I think you have been great taking your free time to help free of charge. I commend you and truly appreciate it. I could tell you a shitload of things you could get a powershell to do, but the community would go into total freakout mode.
My simplest suggestion is to force user input before the benchmark to set parameters of testing. If they know what already works for their rigs that is golden. If they don't know they can just opt for the default test.
Don't worry, I'm actively developing it (when I get free time to do so ) so I'm obviously seeking what users want. I really want to keep it open to any command line miner so I'm avoiding locking the core program down with miner specifics like the 'I' settings. I believe that making the miner settings more obvious/understandable is going to have to be on my things to do as it is possible for users to do a lot of things like this already.
|
|
|
i think the mining profitability is not right fro amd
i calculated for r9 270 -380 x470 and each time i see zcash above monero but actually i test couple of calculator but monero is more profitable
i checked a couple of time
Try MultiPoolMiner, it will mine the best algorithms specifically for your system: https://github.com/aaronsace/MultiPoolMiner/releasesThat is not entirely true. Your program doesn't test even various "i" settings. I like what you are trying to do, but it is far from a test all cards and algos to mine the best. I could go on at length about the various things you should add to your program, but the biggest one is for it to test at LEAST user input "i" settings during the benchmark. I know, I know, you don't want to crash rigs, I get it. You can set custom settings yourself if you already know them and add/remove custom miners (JSON files are supported containing the miner locations and command line options). I would like a list if you have it as I can't implement it if you don't say; try to focus on solutions to problems if you can: https://github.com/aaronsace/MultiPoolMiner/issuesAlthough I will be adding some custom settings, I cannot currently see it being possible to test every combination as the possibilities go up exponentially. You are getting then into the realms of tweaks like overclocking and would take hours/days to work out. I'm not sure anyone has every made what your asking for but we can try.
|
|
|
i think the mining profitability is not right fro amd
i calculated for r9 270 -380 x470 and each time i see zcash above monero but actually i test couple of calculator but monero is more profitable
i checked a couple of time
Try MultiPoolMiner, it will mine the best algorithms specifically for your system: https://github.com/aaronsace/MultiPoolMiner/releases
|
|
|
I think the next info will be useful, example:
Status Current time: 17:00 Last seen/share/refresh: 16:27
It means that now is 17:00 and I refreshed the data at 16:27. It means that the data on my dashboard is 33min old. UTC or my time zone - as for me is better my time zone. If it is complicated, do which is easier for you. Any time is better than no time.
That makes sense; it gives you a reference point for the other times if listed like that. Sounds like some work is being done in that area; should hopefully see how miningpoolhub decides to implement it soon. Could put "33 min" instead.
|
|
|
|