Its official, im a "Ballionaire" !!!!  |
|
|
|
|
I see the pow reduction, and this is good. It keeps supply down and prices up. My question is regarding pos rewards. It was 50% per year interest with a minimum of a 7 day stake. Has this changed?
Vegas
|
|
|
|
|
If anyone can make a pool for this I have lots of hash I can throw at it.
Vegas
|
|
|
|
|
"Time of death" April 7th 2015 3:29am.
Vegas
|
|
|
|
|
nahh, not out to prove anything. KNC are a bunch of scum, and their support just flat does not exist. All the games they play with their customers ruined their own company.My goal was to simply educate people on getting the most out of their systems. I read pages and pages of very upset and frustrated KNC customers, and rightfully so. I have the knowledge to help. I simply wanted to get word out, that they CAN do more, AND how put preventative measures in place for new systems to last longer, and prevent any more damaged dies , as its all heat related. Not here to to defend KNC or make me look good. Btw there are are few other things that must be done to get these speeds. The knc community have made it crystal clear they dont want to hear no more about this, so thats my last word. Good luck folks.
Vegas
|
|
|
|
just saw kncminer delivering within europe which would be optimal as i am also living in europe. Are they still producing hardware? i checked their website but just noticed they re producing 16nm chips and got investment from Accel Partners (15m$). So whats going on exactly? I can't see any webshop or anything. Is it still possible to purchase (profitable) mining-hardware within europe? Is it even possible to make a RoI within a decent timeframe? any help/info is appreciated.
KNCminer is done selling hardware... until they are done with it on the cloud selling contracts, and they are obsolete. don't bother mate... people work too hard for money these days. You may end up seeing some old neptunes after all the solar 16's have been deployed; but seriously....the train left the station over a year ago. Ya, your right. I should have got something better. This piece of garbage only runs at 700Mhs and draws so much damn power.. 1300w. A pile of junk. Im sending it back. Vegas |
|
|
|
Voltage stays the same, and start at 50mhz, and work your way up. Eventually finding the highest speed that die can handle and be stable. Lowering voltage might make it unstable. Raising voltage, will create more heat. You can also take it to a local repair shop and show them what you have, and they should be able to regrease at a fair price.
What I discovered on titans that is quite unique is the lower the temps, the faster they run.
Vegas
Please could you show me a screenshot of your main knc screen showing the "Mining status" and the "HW status" I really want to believe you and talk about this too but i have to see it to believe it  I don't believe it either, esp when his screen shot is showing 2 pool workers btw, in the winter time my cubes were running around 60c and there was no increase in speed let's see a bfgminer screen shot too I will post pics of my fans installed next week, as when I got the titans, and they started thermal throttling to <350Mhs I knew then they were thermal controlled, and that meant the more cooling , the more speed. So, my setup at this moment just has zip ties on the fans and is not ready for presentation. I am waiting on another order of KNC Titan to come in, in about 10 days, and I will make it presentation worthy and pro. A 252 CFM is fan is NOT for everyone. You better have a room you never go in. They are so loud they will hurt your ears. Im not kidding. Before you run out to your nearest computer store and buy 10 gut wrenchingly loud fans, you should watch this video of the SMALLEST version of this fan, then imagine 10 of these together: https://www.youtube.com/watch?v=on9pvkJ0P1wGuys ive owned computer repair shops in Vegas for 20 years. Thats how I understand this stuff. There is not much im good at, but Im a master of electronics, and today setup massive asic farms in warehouses for a living. www.bitcoinlasvegas.net Vegas |
|
|
|
|
Voltage stays the same, and start at 50mhz, and work your way up. Eventually finding the highest speed that die can handle and be stable. Lowering voltage might make it unstable. Raising voltage, will create more heat. You can also take it to a local repair shop and show them what you have, and they should be able to regrease at a fair price.
What I discovered on titans that is quite unique is the lower the temps, the faster they run.
Vegas
|
|
|
|
No you misunderstood, this is *1* Kncminer Titan Batch 2, running at 700mhs... Yes. Magical. Lol
Vegas
Sorry not possible. The hashrate on the machine is the most accurate not a pool. I don't, of course, mean to burst your bubble. It is, however, going to happen at some stage in the near future. Come and tell us how happy you are in 2 months when dies start dying and new firmwares actually hash at lower speeds, ect ect so on and so forth. shhhhhhh.....you were supposed to wait till he got my 2 dead dies working (hey at this point i will attempt the voodoo for dummies book) now you went and 'discouraged him" all to heck...... Im glad to help where I can. Ok.. first thing you need to understand is.. failing dies is a PHYSICAL problem. So any fix will not be a professional permanent fix, and will probably become future problems. The real permanent fix is an rma to Kncminer or a new cube. It is entirely possible that if 1-2 dies fail, and then if you let it sit for 20-30min, and reboot again, and dies return, its most likely a heat issue. There lies a MASSIVE heatsink on top of those dies, and titans do run quite hot. Its quite possible that one or 2 of the dies have dried up thermal grease. Its very easy to remove that massive heatsink inside and clean both the bottom of the heasink and the dies, and regrease. I recommend Acrtic silver for thermal compound. After youve done this run your rig. Watch the temps , if one cube is much hotter than the others, and its the same one that has the failing dies, its most likley a heat issue. I dont like to see my cubes go above 60C, and they usually dont. If cleaning the dies on the bottom does not fix, then do NOTHING with voltage! Some have said that raising the voltage has brought the die back to life for a short time, BUT now your adding more heat and stress on the die. If I were you, I would look more at lowering the speed. Set the die to lowest MHz setting, run for 1-2 hours, if its stable, then bump it up one more notch , and watch for 1-2 hrs, until you reach the speed where it stops working, and then you lower it down 1 notch. Hope this helps. btw Ill say it again for those that dont beleieve me, my titan batch 2 DOES run 24/7 at 600-700Mhs, and NEVER goes over 55C. Here is the secret. http://www.newegg.com/Product/Product.aspx?Item=N82E16835706015&cm_re=252_cfm-_-35-706-015-_-Product. 252CFM!! THE most powerful fan for computers and such. One in the front that forces air in, and one in back that serves as a vacuum. When I put my hand behind one of the cubes, it feels like a hairdryer set on high, the heat is coming out so fast, and the heat NEVER builds , therefore I wont be killing dies anytime soon.  Vegas |
|
|
|
|
No you misunderstood, this is *1* Kncminer Titan Batch 2, running at 700mhs... Yes. Magical. Lol
Vegas
|
|
|
|
Speaking of tweaking, Ive been tweaking this baby all day and now she is singing!! This is only 1 set of Titan Batch 2... and its magical!!! Yes these should ONLY be sold to very technical people as they are a nighmare to get working, but when they do..hold on tight!  |
|
|
|
The fast start rar doesn't work I keep getting blkindex.dat error
Ya, I found the same problem with fast start. I does not work and errors out when launching new wallet. Had to sync from scratch. Vegas |
|
|
|
|
I have a Kncminer Titan Batch 2. 400MHS. I have that now, and another one I ordered will be here in about a week. So for now 400MHs.
Vegas
|
|
|
|
|
ya..it does seem that way
Vegas
|
|
|
|
|
ok so are there ANY working pools ANYWHERE?
Vegas
|
|
|
|
|
Im almost ready to buy. My biggest frustration is finding the pool that has the highest hash. I dont want to hear that I can "still make money on other lower hash pools", because its simply not true. So say I buy smarterhash, and it tells me that goldcoin is the most profitable for me. Problem is lets say the difficulty is 90. Im now searching for the pool that is getting 99% of the blocks because it has enough hash power, most all the others have none. *IF* your software can tell me which pool has the highest hash for that coin your suggesting I mine, then youve got me sold on your highest plan. Ive read a bit, and smarterhash does look good, but does it tell you which pool has the highest hash? If not do you plan to implement this in the very near future?
Vegas
|
|
|
|
|
Guys the latest wallet I could find is version 8, dated April 2014. Is there a later version? I need windows binary. Also is there a bootstrap.dat file that goes near march-april 2014?
Vegas
UPDATE: OK I cannot pass block 39999 with this wallet, so there must be a later windows binary version,
|
|
|
|
If anyone wants to mine fast goldcoins, I just added over 400Mhs of scrypt to http://gld.lifeforce.info/ , and That is over 90% of "net hash". Plz join me. Vegas |
|
|
|
|
Show Posts
