Man, Guardians of The Galaxy 3 was somewhat disappointing.

It has some good bits, especially the Rocket stuff, but much of the movie became a real clusterfuck with too many characters and too many redemption arcs thrown in.

What a shame.

The first one was excellent and a refreshing surprise.

This one for me is a 5 or 6/10 at best.

Not much point seeing any more Marvel movies from now on I reckon.

Oddly enough I believe that the "power fast boot" option may not play nice with certain pools causing a reduced hashrate.

When I removed this option the miner took 10 minutes or so to fully spin up but when it did it finally reached full hashrate on the pool that it wasn't hashing well on.

This only occurred on 1 of my M50's but it maybe worth a look. Who knows...

Rainy Mother's Day
Quality time with mommy
While there is still time




#haiku

https://www.bitrawr.com/difficulty-estimator


Latest Block:   789704  (a minute ago)

Current Pace:   101.0903%  (1449 / 1433.37 expected, 15.63 ahead)

Previous Difficulty:   48712405953118.43                            
Current Difficulty:   48005534313578.78                            
Next Difficulty:   between 48592207319436 and 48643269679481
Next Difficulty Change:   between +1.2221% and +1.3285%
Previous Retarget:   May 4, 2023 at 10:54 AM  (-1.4511%)
Next Retarget (earliest):   Thursday at 7:16 AM  (in 3d 21h 28m 50s)
Next Retarget (latest):   Thursday at 7:34 AM  (in 3d 21h 46m 2s)
Projected Epoch Length:   between 13d 20h 22m 33s and 13d 20h 39m 45s
Copy stats to clipboard

hello !

I received recently from bitmain reseller my 6 S19 JPro 104 Th i ordered a couple of weeks ago ! I started the configuration on the servers one by one and plugged them on my farm gradually ! one of them started to show abnormal behaviour until i noticed that the hashbords went off- line after some server reboots !!

Kindly get notified that the server is still under warranty period

Other 5 Servers S19 JPro are mining fine !! Except the one mentioned above
please find in the attachment the log file for the faulty server
2023-05-14 12:34:52 ==========================capability start==========================
2023-05-14 12:34:52 board num = 3
2023-05-14 12:34:52 board id = 0, chain num = 1
2023-05-14 12:34:52    chain id = 0
2023-05-14 12:34:52 board id = 1, chain num = 1
2023-05-14 12:34:52    chain id = 1
2023-05-14 12:34:52 board id = 2, chain num = 1
2023-05-14 12:34:52    chain id = 2
2023-05-14 12:34:52 ==========================capability end============================
2023-05-14 12:34:52 chain num = 3
2023-05-14 12:34:52 skip loading levels for now
2023-05-14 12:34:53 load chain 0 eeprom data
2023-05-14 12:34:54 load chain 1 eeprom data
2023-05-14 12:34:54 load chain 2 eeprom data
2023-05-14 12:34:54 i2c_sim_init start
2023-05-14 12:34:54 init gpio477
2023-05-14 12:34:54 init gpio476
2023-05-14 12:34:54 i2c_sim_init end
2023-05-14 12:34:56 power open power_version = 0x75
2023-05-14 12:34:58 power is not Calibrated
2023-05-14 12:35:00 miner type: Antminer S19j Pro
2023-05-14 12:35:00 multi machine mode
2023-05-14 12:35:00 load machine BHB42603 conf
2023-05-14 12:35:00 machine : BHB42603
2023-05-14 12:35:00 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2023-05-14 12:35:00 fan_eft : 0  fan_pwm : 100
2023-05-14 12:35:00 create thread get_nonce_and_register_thread
2023-05-14 12:35:00 fixed working voltage = 1360
2023-05-14 12:35:00 min freq in eeprom = 545
2023-05-14 12:35:00 fixed frequency is 545
2023-05-14 12:35:00 Chain

• PCB Version: 0x0170

2023-05-14 12:35:00 Chain

• BOM Version: 0x0010

2023-05-14 12:35:00 Chain [1] PCB Version: 0x0170
2023-05-14 12:35:00 Chain [1] BOM Version: 0x0010
2023-05-14 12:35:00 Chain [2] PCB Version: 0x0170
2023-05-14 12:35:00 Chain [2] BOM Version: 0x0010
2023-05-14 12:35:00 bad chain id = 3
2023-05-14 12:35:00 Fan check passed.
2023-05-14 12:35:00 uart_trans addr:0xf704d000.
2023-05-14 12:35:00 max sensor num = 4
2023-05-14 12:35:00 STATUS_INITED: soc init done!
2023-05-14 12:35:00 temperature_monitor_thread start...
2023-05-14 12:35:02 start to init...
2023-05-14 12:35:04 power type version: 0x0075
2023-05-14 12:35:05 disable power watchdog: 0x0000
2023-05-14 12:35:06 Enter sleep to make sure power release finish.
2023-05-14 12:36:02 Slept 55 seconds, diff = 5.
2023-05-14 12:36:06 set_voltage_by_steps to 1500.
2023-05-14 12:36:15 start up min temp by 75a = 24
2023-05-14 12:36:18 Chain[0]: find 126 asic, times 0
2023-05-14 12:36:19 !!! reg crc error
2023-05-14 12:36:20 Chain[1]: find 124 asic, times 0
2023-05-14 12:36:21 !!! reg crc error
2023-05-14 12:36:22 Chain[1]: find 124 asic, times 1
2023-05-14 12:36:23 !!! reg crc error
2023-05-14 12:36:24 Chain[1]: find 124 asic, times 2
2023-05-14 12:36:24 Chain 1 only find 124 asic, will power off hash board 1
2023-05-14 12:36:26 Chain[2]: find 126 asic, times 0
2023-05-14 12:36:26 ERROR_SOC_INIT: soc init failed!
2023-05-14 12:36:26 stop_mining: soc init failed!
2023-05-14 12:36:26 uninit_temp_info
2023-05-14 12:36:26 do not read temp anymore...
2023-05-14 12:36:26 cancel thread
2023-05-14 12:36:26 ****power off hashboard****
2023-05-14 12:36:27 temp monitor thread exit
2023-05-14 12:37:19 Version num 65536
2023-05-14 12:37:19 Mask num 0x1fffe000
2023-05-14 12:37:19 opt_multi_version = 65536, interval timeout = 2837042
2023-05-14 12:37:19 freq = 545, percent = 90, hcn = 4809, timeout = 2837042
Would you please assist for the case described !
Many Thanks in advance.

Thank you so much for the thorough answer. Is the USB quiet method very expensive?  Can they be run, or can any systems be run without any cooling if they sit in an air conditioned room that’s about 78°?
I read something old online that said the Goldshell KD2 is the quietest mining equipment at 55db but I don’t think it mines Bitcoin, or maybe it does.
Regarding your question about the 600kwh a month accumulation… I could let it accumulate for several months at a time and then run the equipment. Basically near the end of the year I’ll have 7,200kwh to use. I could run the mining equipment for a month straight and then turn it off for several months.
Your analysis was excellent. Thank you. If I do figure out an option and do get a setup, any chance I can tip you to help me get it?
I’d really like quiet as possible and not requiring fans and extra cooling.
Does the equipment require 220v or 110v with really high amps?
Thanks.

200 weekly MA defended for now, the bleeding has stopped for the moment. Feels like we’re on a knife edge, will the US default or will the debt limit be lifted?

The halving is less than a year away but we are going to get volatility before it I think.

Pepper your angus.

I highly doubt it has any affect, the hashrate is still whiting the specs of -+5% but i think it could do better, it seems like the env temp was not so great when the miner tuned, although temps look good now according to the image, I think a reboot would change the hashrate if the env temp is better than when it tuned the first time.

The link to the image you provided is invalid. You should copy the full bbcode link. As an alternative, You can use http://talkimg.com/ by @joker_josue for a simple version of imagebb website.

Don’t mind me, I’m just interested on this topic so I’m reading the flow of conversation.  

The image is not working, I don't use imgur as much recently since it does these stuff where it gives you a link and the link doesn't show anything, I use https://imgbb.com/ instead, you can copy the image link and post it here it will show just OK on the forum.

Please include a picture showing the frequency of the gear you said is underperforming.

i guess if a miner had a large share of the network and they wanted to cause damage to it they could refuse to include transactions and just fill up blocks with whatever they wanted to, if anything. but as you point out, it wouldnt be in their financial best interest it doesn't seem like. but say they had 30% of the hash rate then i guess they could mine 30% of the blocks so they could slow down the network by 30% if they just mined empty blocks.

Hello everyone,

I mined some satoshis more than 10 years ago, and just now I found the HD with the corresponding cgminer folder. I never messed with bitcoins again, and I don't even remember what the process was like. Is there still a possibility to recover these satoshis?

If so, some instruction would be most welcome.

Thanks in advance.

P.S. The software version at that time was 3.7.2 for Windows.

mfw i paid over 1000 bucks for expedited shipping and only offer 150 bucks as "refund" to get it by June 30th at the soonest.

I like how they let people click the 10-20 day shipping option knowing damn well that wasn't going to happen.

Glad to hear it.
It's a sign the BRC-20 spamming is already slowing down. The shit-token-boys must be slowly running out of sats, oh my.
Must be fun times as a miner when you suddenly get an almost 2x on your usual income.

Let's see how the next few days perform. My guess is: Slowly continuing to decrease to pre-BRC-20 levels with a few random spam-bumps in-between.