Someone ever got this problem after a few hours..
Something happens (I don't know what) Cgwatcher opens sgminer automatically and it just sits there and does nothing. Cgwatcher opens sgminer again and nothing happens...
All cmd windows stay open without doing anything
I get that sometimes. I end up having to reboot for it to work. Wish I knew how to fix it.
|
|
|
I've been having a little problem with sgminer as well.
If I have been mining and I hit the button to stop mining to do other things for a while 95% of the time the sgminer window freezes up when I hit the start nining button.
Any ideas?
Thanks.
|
|
|
FYI for all, give SGminer a shot. I was able to clock my card quite a bit higher with it than with cgminer. Seems to be more stable than CGminer.
|
|
|
Ntrain2k: So it works if you start mining at intensity 19, but if you start it at 14 and set it to increase to 19 during idle it locks up? If I'm understanding you correctly, it's difficult to say... CGWatcher is simply sending a command to cgminer telling it to change the intensity. It sounds like more of a cgminer issue, but since cgminer no longer supports GPUs I'd suggest looking at sgminer, which is a cgminer fork focusing on GPU mining. As I mentioned above, you can download Windows binaries here: http://coinmyne.proboards.com/thread/24/sgminer-compiled-version-download Yes Sir, that's correct. If I fire it off at 19 it runs fine. I'll give sgminer a shot. Thank you.
|
|
|
Might have found a little bug.
I tried to use the setting to change the intensity once the computer is idle for XX min.
My card is rock solid at an intensity of 19 at the set clocks.
Changed my bat to an intensity of 14 and set up CGwatcher to change it to 19 after idle.
It changes and the card begins ramping up but cgminer locks up before it settles in at the new intensity. I have to lower my GPU and MEM clocks 25+ for it to not freeze cgminer up.
Any ideas or suggestions?
|
|
|
its eu2, not eu
stratum+tcp://eu2.multipool.us:7777
eu2 is said to be the ddos protected pool, but eu should of worked. yes, and if you check site, they are being ddosed and they said to use ddos protected eu2, if you dont use eu2, your not going to be mining on multipool Reports on the thread on cryptocointalk the eu2 one is down now too.
|
|
|
I'll look over the code that displays the coin at the top. Keep in mind that for multi-coin pools (auto-switching pools), I can only report the coin if they give it to me. The data hashco.ws provided me has been down for quite some time and I have not heard back from them about fixing it. Multipool was working last I checked. Middlecoin refused to provide which coin they are mining. Other than that, it should display the coin the current profile is linked to... unless there is something I need to fix. Also, for multi-coin pools it may take up to 5 minutes for the coin to be updated because I didn't want to overload them with requests. With new auto-switching pools popping up frequently, this is something I'm going to need to revisit as soon as I get a chance. I already have some ideas on how to improve it.
Thanks. Multipool is the one I am using.
|
|
|
Also, I liked on the previous version where it showed what coin was being mined in the top mining bar. Anyway to set that back?
Thanks!
Showing the coin at the top has not been removed. If CGWatcher is able to determine the coin being mined, it will display it. If you're referring to multi-coin pools, if the pool is not currently providing the information then CGWatcher can't display it. For example, the data hashco.ws provided me is down at the moment, so it cannot display the current hashco.ws coin. I've emailed them and hopefully it is something they can fix quickly. It was working before the last release. Just stopped for some reason.
|
|
|
It should be enough.
Danka Sir.
|
|
|
Effective immediately, this thread is no longer considered an official support area for Multipool. I will check it as time allows, but it's looking like Bitcointalk is going to be eliminating Alt Crypto forums soon enough. I suggest everyone register on Cryptocointalk.com and use the new Multipool forum for support issues: https://cryptocointalk.com/forum/660-multipoolus/Thanks, --Flound Waiting on my confirmation from them.
|
|
|
Currently running a 5870 on one of my rigs and have picked up a 6950 with the unlocked shaders. Assuming a decent overclock on each card do you think a good 700W PSU (OCZ 700 80+) will be enough?
Rest of system is a dual core pentium D, a dvd drive and a single HD.
Thanks!
|
|
|
BTC sent for Asus 6950 1G.
|
|
|
Flound might be doing some work on the site?
|
|
|
EU server is working fine for me right now.
|
|
|
Increasing the minimum DOGE withdrawal tenfold is kind of harsh...
Yes but now on-demand withdrawals are practically free. The people with low hashrates aren't the problem, the people with high hashrates that still use tiny auto thresholds are. I'll be implementing 24 hour payouts soon, which will pay fee-free every 24 hours regardless of your balance. Danka Sir!
|
|
|
Increasing the minimum DOGE withdrawal tenfold is kind of harsh...
|
|
|
Flound,
Multiports is giving wrong info. The most profit is not on moon, the exchange rate is wrong
(MP) MOON 7254.5 MH/s 0h5m 0.00000055 126.07
shoud be ~0.00000013
(MP) EAC 955.9 MH/s 0h1m 0.00000177 47.71
should be ~0.00000144
It can't be a delay, the difference is too big. Maybe you can have a look, if you have time or it
Yea, MOON is WAY off. Looks like MOON value is showing correctly now, but the profitability algorithm must be off, as we were mining it and it was half of the next profitable coin. (MP) MOON 336.6 MH/s 1h46m 0.00000013 29.58DOGE 15974.7 MH/s 0h3m 0.00000164 60.46EAC 14.4 MH/s 1h43m 0.00000177 51.88 DMD 26.7 MH/s 0h4m 0.00097254 51.54 DGC 62.6 MH/s 0h5m 0.00031626 48.74 WDC 98.5 MH/s 0h53m 0.00039578 47.58
|
|
|
Flound,
Just a thought. Is there a way to implement an autoswitch for all of the servers that will use the DNS load balancing to send miners to a working pool automatically when a DDoS attack is happening?
|
|
|
Flound,
Multiports is giving wrong info. The most profit is not on moon, the exchange rate is wrong
(MP) MOON 7254.5 MH/s 0h5m 0.00000055 126.07
shoud be ~0.00000013
(MP) EAC 955.9 MH/s 0h1m 0.00000177 47.71
should be ~0.00000144
It can't be a delay, the difference is too big. Maybe you can have a look, if you have time or it
Yea, MOON is WAY off.
|
|
|
|