|
Sorry but what exactly is VC funding?
|
|
|
|
|
@sp_
Just finally ran the re-compiled version for lyra2 and the rejected rate looks to be a lot better.
|
|
|
|
I get low accepted % on lyra2. Around 84% on release 49.
I have fixed it now@git. The rejects where of the type low difficulty share. X11 also had this problem on some pools Will compile and run it. |
|
|
|
|
@ chrysophylax
No -g parameter. It does not work for me as it just crashes my driver, Windows 7 64 bit. It does the same on Windows 10 64 bit. Just running regular bat. Not even -i setting.
@ sp_
That build does have a slight speed increase and my hash rat is a little higher after about 10 minutes of running but still only 88% so far.
Will see if it gets better.
|
|
|
|
|
I get low accepted % on lyra2. Around 84% on release 49.
|
|
|
|
|
@pjcltd
I've posted a few times ad sent you a PM.
I didnt' get much Teeth at all but it is still not showing up at Gorilla exchange.
user name: antonio8
|
|
|
|
|
What is the link to the gorilla exchange, not the btcpool?
|
|
|
|
Oiling the fans should be the cheapest and fastest option, and will fix them in most cases.
oiling ? most of the fans are sealed... I have done this quite a bit to my fans. Almost all of mine I just peel the sticker off on the back and drop a bit of oil (I use a clear oil from my hair clippers) and it works fine. Edit: Maybe I have cheap fans instead of the sealed ones. |
|
|
|
Just downloaded this version and put the litemode in the config. The wallet will not open. It just force closes at launch. I have tried opening it about 20 times now. |
|
|
|
COMMIT 778 and 779--
Both commits built readily with "BASH build.sh" and the default makefile.am. I notice that SP_ already has commit 780 on GitHub.
For Lyra2, I am getting 820kh/s per 750ti, and 4.8 mh/s for my 6x750ti FTW rig. Quark is a little slower, though, building up to 38Mh/s for the 750ti rig, and slower than the previous 38.6Mh/s on the same rig. --scryptr
scryptr You overclock a lot on the 750ti's for that hash on lyra2. |
|
|
|
How come 750's are better for mining then 900~  arnt the 900's a newer model? You might not have read where I said this algo isn't optimized for the new cards as it was out before the cards. Again for the current released mine it is not optimized. That is not saying there are not private miners that are optimized.  Hope that helps. |
|
|
|
Anyone mining with a 960 or 970 care to share what you are getting on hash rate?
Hey, if you can share the specific model of your graphic card, I am able to make an educated guess withing 10-15% accuracy based on mathematical calculations. How about Evga 970 and 960. No one card in particular was just trying to get a ballpark. Woops, couldn't find that card in the litecoin mining comparison... I won't be able to do the math then... :/ sorry. I am just looking for any 960 or 970 numbers. No card in particular.Never mind. I found what I was looking for. Cool, want to share?  My 960 was mining worse than my 950ti but it seems that the released version of ccminer is not optimized for the new maxwell. My 970 is only about 1.8 times that of the 950ti. I just wanted verification to make sure. So to me it seems it is not worth it mine this algo on my 960 or 970 so I'll just keep my 750ti's on it and mine something else with the other cards. Nice Have you tried mining and seen what your hash rate is for Lyra2? The 960 was about 640 kh/s and the 970 about 1, 200 kh/s. The 750ti about 720 kh/s. |
|
|
|
Anyone mining with a 960 or 970 care to share what you are getting on hash rate?
Hey, if you can share the specific model of your graphic card, I am able to make an educated guess withing 10-15% accuracy based on mathematical calculations. How about Evga 970 and 960. No one card in particular was just trying to get a ballpark. Woops, couldn't find that card in the litecoin mining comparison... I won't be able to do the math then... :/ sorry. I am just looking for any 960 or 970 numbers. No card in particular.Never mind. I found what I was looking for. Cool, want to share? My 960 was mining worse than my 950ti but it seems that the released version of ccminer is not optimized for the new maxwell. My 970 is only about 1.8 times that of the 950ti. I just wanted verification to make sure. So to me it seems it is not worth it mine this algo on my 960 or 970 so I'll just keep my 750ti's on it and mine something else with the other cards. |
|
|
|
Anyone mining with a 960 or 970 care to share what you are getting on hash rate?
Hey, if you can share the specific model of your graphic card, I am able to make an educated guess withing 10-15% accuracy based on mathematical calculations. How about Evga 970 and 960. No one card in particular was just trying to get a ballpark. Woops, couldn't find that card in the litecoin mining comparison... I won't be able to do the math then... :/ sorry. I am just looking for any 960 or 970 numbers. No card in particular.Never mind. I found what I was looking for. |
|
|
|
Anyone mining with a 960 or 970 care to share what you are getting on hash rate?
Hey, if you can share the specific model of your graphic card, I am able to make an educated guess withing 10-15% accuracy based on mathematical calculations. How about Evga 970 and 960. No one card in particular was just trying to get a ballpark. |
|
|
|
|
user name: antonio8
No balance
|
|
|
|
|
Anyone mining with a 960 or 970 care to share what you are getting on hash rate?
|
|
|
|
Wallet update? How does this decentralized exchange work? It says wallet not online! I am missing a deposit in my wallet. It shows the txid, it was received and confirmed, but not part of my balance
which version do you use? I asked about this on April 27th and you said you would have the updated wallet with staking available and I still don't see it. What is the correct current version and where is it downloadable at? Does it have the staking in it? Thanks |
|
|
|
what i was wondering is whether the -a spread algo that in THIS fork of ccminer ( that doesnt work with pool mining ) is going to be replaced with the optimized version that you sent privately ( which works flawlessly with the pool ) and will be incorporated into this fork? ...
that would be fantastic if this is so ... and we would have no issue donating much more hashpower to see that happen ...
Ok. I can merge the kernals into the latest branch. Still private for the donators. Any updates soon on the private cryptonight miner soon? |
|
|
|
Wow excellent work, i get great improvement performence with 2xgtx 970 maybe 5 to 8%
Tested on X11,x13 and quark (x13 get a few not validate on cpu = 1 each min approx)
I have 2 question :
1- what is the -g (what it does and how to use it, is it the number of your gpu ex:if i have 2 gtx970?) Did not find it on the previous page
2- Is it normal on yaamp the you get less of mh/s vs ccminer?
Exemple on quark 31 mh/s ccminer vs 22 mh/s yaamp
Thanks man !!
Not sure about yaamp. I only show about 3-9 Mh/s of my 11.2 Mh/s on my scrypt asics. |
|
|
|
|
Show Posts
