you need to open your ports to point if from outside.
Im Sorry to be so buggy but Please how can i open my ports? This depends of your modem/router/firewall. I cannot help you for that sorry :S Otherwise, you can also rent a small digital ocean VPS like a 10$/month droplet, install ubuntu (automatically done), install anoncoin following https://wiki.anoncoin.net/How_to_build_Anoncoin_from_source#Ubuntu_64_bit_or_Debian_8 , synchronize with the bootstrap.dat and configure correctly the anoncoin.conf in ~/.anoncoin If you want to be a node for the i2p network you can also install i2p or i2pd and configure the anoncoin.conf in mixed mode (commented #onlynet=i2p and all others #onlynet= , and [i2p.options] enabled=1). It is better to not be in onlynet=i2p if you want to mine on this node because of an increase in stale blocks (although this is possible you will lose a small part of mined blocks due to increased propagation time, thereby reducing your mining efficiency). Hope it helps and thank you to strengthen the Anoncoin network (especially if you happen to mine TX)! Thank you for taking your time to enlighten me i think the digital ocean option is my best bet, how do i ensure to mine TX? and is there any incentive for running a node without mining?
|
|
|
What stake or percent does an ICE token holder get?
|
|
|
you need to open your ports to point if from outside.
Im Sorry to be so buggy but Please how can i open my ports?
|
|
|
default max tx size mineable by p2pool is 15kB AFAIK. so the big txs with lots of fees cannot be mined with p2pool (my version can.)
Ok i am quite a noob in mining, is your pool open to the public? if yes i could point miners when i can so whats the stratum.....?
|
|
|
Funny, they seem to run an unofficial solo p2pool instance. Thats not the idea of a p2pool. i'd avoid it just because of that. They should either provide the source of their p2pool version (so others can run their own instance and connect to them) or connect to the (no longer existing due to no more people joinin) ANC p2pool network.
I am confused here i dont know if you can help me understand whats going on? Is there a systemic problem with the blockchain or the xpool owner is refusing to pay me for work done? EDIT. This is a screenshot of my address as available from abe explorer, it shows on the blockchain some blocks found but it doesnt reflect on my balance what could be wrong pls? they likely havent found a block yet, hence your not paid. just because someone found a block, dosnt mean your automatically paid. the pool you mine at has to find the block. But looking at my address it showed blocks were found yesterday when the network was down i rented 1.4 GH to mine and at that time im sure i mined a lot of blocks but my balance is not in agreement, looking at the screenshot you can see blocks found and yesterday the pool found most blocks as Cryptoslave confirmed http://abe.darkgamex.ch:2751/address/ATxxdPs7mqgvXrhfnbeLwNxL6iazbabMxFIf this is your address you had the 21 June at 13:48 5eb80de57c... 686852 2017-06-21 13:48:15 0.04741731 4406.56949868 ANC and 4h13 min later 52a3425eac... 686977 2017-06-21 18:01:46 3.95599295 4507.51458004 ANC so you were paid 101 ANC for 88 blocks found. You would have got 110 ANC if you were solo mining + fees. You lost 9 ANC because on begining it balanced your hashrate with miner that was there before you so you gave them your reward and the more you mined the more the proportion went to you as you had the bigger hashrate and the pool algorithm then gave you more like a proportional pool with averaging of block reward on several blocks. You see it clearly your gain increase over time till you max out at 1.25 ANC. I see this pool mine blocks has it got fees on the last blocks 3.95599295 ANC is Generation: 1.25 + 3.219 total fees. IMO if you think you miss block reward it is just because of the proportional averaging of the mining pool, with such a huge hashrate you shall point it to your own node to get the full block reward+fees, but if the hashrate is rented you need to open your ports to point if from outside. You could also rent less hash power but for a longer time (days) to avoid this issue, and point this constant hashrate at xpool, if this is cost effective for you. CS Yes thats my address from btc38 and i use it to mine on pools when i can the balance is not exactly accurate as it only shows entire transaction i wish i had that 4k+ though. Thanks for making things clear now
|
|
|
Funny, they seem to run an unofficial solo p2pool instance. Thats not the idea of a p2pool. i'd avoid it just because of that. They should either provide the source of their p2pool version (so others can run their own instance and connect to them) or connect to the (no longer existing due to no more people joinin) ANC p2pool network.
I am confused here i dont know if you can help me understand whats going on? Is there a systemic problem with the blockchain or the xpool owner is refusing to pay me for work done? EDIT. This is a screenshot of my address as available from abe explorer, it shows on the blockchain some blocks found but it doesnt reflect on my balance what could be wrong pls? they likely havent found a block yet, hence your not paid. just because someone found a block, dosnt mean your automatically paid. the pool you mine at has to find the block. But looking at my address it showed blocks were found yesterday when the network was down i rented 1.4 GH to mine and at that time im sure i mined a lot of blocks but my balance is not in agreement, looking at the screenshot you can see blocks found and yesterday the pool found most blocks as Cryptoslave confirmed
|
|
|
Funny, they seem to run an unofficial solo p2pool instance. Thats not the idea of a p2pool. i'd avoid it just because of that. They should either provide the source of their p2pool version (so others can run their own instance and connect to them) or connect to the (no longer existing due to no more people joinin) ANC p2pool network.
I am confused here i dont know if you can help me understand whats going on? Is there a systemic problem with the blockchain or the xpool owner is refusing to pay me for work done? EDIT. This is a screenshot of my address as available from abe explorer, it shows on the blockchain some blocks found but it doesnt reflect on my balance what could be wrong pls?
|
|
|
Guys does this ""Warning: (from bitcoind) This is a HARDFORK build for block 585555"" on xpool.net ANONCOIN Page mean the pool is behind? i dont understand why i didnt get paid
|
|
|
I also was mining at hashtocoins, after htc crash i quickly moved my miners to xpool.net but xpool has not paid me a single ANC even though on the blockchain it shows i was with the biggest hashrate and earning but xpool did not pay me for my work
xpool had 1.5 GH hashrate the 21 June but only 100 MH the 22 June. They found a lot of blocks. If you configured your address correctly it shall work. Nonetheless, people who have more than 100 MH/s of hashrate shall solo mine IMHO. It is very easy to setup and excellent for strengthening the Anoncoin network. Save this text into anoncoin.conf and place it in your %appdata%/anoncoin directory (or in /anoncoin/data for anci2pd). Change username and password to the same value than set on your asic. Uncomment #rpcallowip=192.168.0.0/24 and set it to you asic IP. Point your asic to this wallet IP address. People with GPU shall not mine anoncoin, this is profitable only for SCRYPT asic, mine other altcoin (privacy focussed are zcash, monero). Yes, when i noticed Hastocoins crashed i rented miners from MRR about 1.4GH to support the network and i used my ANC address as username and mining was fine but i have gotten no payment from Xpool i thought i should wait but its like Xpool owner refused to pay me
|
|
|
I also was mining at hashtocoins, after htc crash i quickly moved my miners to xpool.net but xpool has not paid me a single ANC even though on the blockchain it shows i was with the biggest hashrate and earning but xpool did not pay me for my work
|
|
|
Hi @Cryptoslave , thanks for all the good job you have been doing?, i rent miners to mine at pools how do you mean by multipools do not mine "ANC TX?" I want to be clear please is there any pool you can suggest that mine "ANC TX" as im making use of rented miners?
|
|
|
Good news...ordered additional memory for the servers. Should arrive sometime next week. This should make room for additional pools Also working on updating the code to version 13.4. HI CartmanSPC been mining ANC on your pool yet no payout why please?
|
|
|
Apparently one of the major pools broke down, but hashrates coming back up, i wonder what will happen to previous transactions tho
|
|
|
wow i see why the coin breaking charts kudos to you all
|
|
|
- 1 Million coin supply is too low for a "doing good" coin. - I suggest a premine/swap on ubiq or ethereum or any other good platform - total starting coin supply should be 100 million new good Karmacoins - 76 billion karma swapped at 1000 rate i.e 1000,000/1000 = 76 million new good Karma. Remaining 24 million reserved for projects, devs and community decision. ----- 76mill + 24mill = 100 million new good Karmacoins. I am predicting 1 Karmacoin for 1 usd. With this both investors and Karma community are happy!
|
|
|
Any existing pool for mining Karmacoin?
|
|
|
Its Good to be Good, Karma will always remember!
|
|
|
there is a 20 btc buyback insurance at 100sats on yobit, i like that
|
|
|
i just did my calculations on rented miners looks like im heading for a loss, maybe it isn't profitable to Roi on rented rigs
|
|
|
Hello all im a noob in mining, i am about to rent rig from MRR, what do i input at the site after renting?
You will need to add pools to your rented rig. For us the following should do Host: ny1.minez.zone:3043 Address: your zen address Password: can be anything Worker name: can be anything OK Thanks, but how often do you pay out Minimum payout 0.1 ZEN, Payouts are default for ZEN at after 100 block confirms. Ok great, but do you have idea how many zens i can mine with 1kh contract?
|
|
|
|