Blade looks fine, but it does not power up using the six pin connectors , not sure what the deal with it is i  think the power connector is damaged not the blade physically, it seems pretty clean with no burns on it.

btw how did you manage to burn your boards ? they seem to run cool for me even with the 1200 frequency.

Another thing i would like to do is run these boards on a PI-2 and run more than six boards on a single controller.

I will post pictures of the board end of today so you can see and determine if it will be useful to you.

so bottom line it for us here what did you use that lowered your temps AS5 then ? or MG ?

I have have a large repasting project for my Scrypt Asics , a 10-15 degree reduction in temps would be great for me as well

I had a miner that did that the blinking lights that is.  The miner will eventually turn itself off if the ASICs can't intilize
Which is what the blinking lights issue is.

First you want flash the sd card with a clean new image, if that fails try a new rasbery pi
That's how I fixed one of my boxes, the pi was bad

I have some broken a2 12 chip blades, if I send you one and you can fix it could you update your image?

Scammers basically, I shipped stud and they said they didn't get it one time , they disputed and still lost lowered my feedback.

** edit *** nm my negative feedback was some dude I sold a psu pretty much new in box for $85, I forgot to include the power cable and the loser bitched at me
I pretty much got indignat dude got a smoking deal and bitches about a power cord that I have like 50 of that type laying around my house lol.

here is his feedback .. what a dushebag:
Forgot the power cord to psu. An told me to buy one.... wow. Never again. Buyer: Member id torenbvs1156 ( Feedback Score Of 53Blue star icon for feedback score in between 50 to 99)   During past year Feedback conversation
  ATX 1 Fan, Rosewill LIGHTNING-800 800W 80 Plus Gold Certified Power Supply (#301278701499)


Check the ratings I've sold alot of stuff

I've only had one bad feedback in the last year , main thing is I never request for feedback after a sale dont have the
Time to waste soliciting feedbacks.

*** edit ** updated the sp20s with the mining stats from today and asic stats for the Sp20 Jackson.

Too many bargain hunters out there , plus people are waiting for SFTARDS hardware , they don't understand that since it is best and only new hardware in town it will be even more overpriced than previous generations that had more competitors.

You fail to mention the fact is the supply of new Sp20s coming into the market is.... drumroll 0.   They are not made anymore thus their value wont go down until better hardware comes to the market
and right now the only other hardware the S5 and S4 are holding their prices as well. 

 From Israel with shipping and Duty even if the sp30 was priced at $500 which I know it was not lower than $690 since that's when I got my sp20E, you were paying closer to $700 per unit.

any idea on how to connect the controller board for an A2 terminator to these PI 2s ?  It seems to data connection port is different on the pi2

Um I paid $134 that includes shipping for refurbished IBM 2800 watt platinum psus
I'm pretty much locked into those since I bought two jaberwock breakoutboards along
With the bunk psus he sold me,

Why would I pay $130 for a refurbished evga anything  

I dont want to go back and forth with you if anything I was more anoyed with his response , I definitely know I wont every buy another used psu of this type not only did I lose the $200 I paid for the psus but also the week of downtime
The failure cost me.

No one will sell you working sp20s for $250 lol gluck with that,

$250 or $350 is along way from $500 you sound like a dumpster diver or
Garage sale shoper id let the units collect dust rather than basically throwing them away for $350

Lol a review ? I was burned on these so honestly I'd be doing the community a disservice
If I didn't express my experiences with theses.

1 out of 15 I doubt that I had two go out in less than 3 months, the difference from these with a normal evga psu is at lest you get the 5 or 10 year warranty with this you have zero recouse when not if the fans fail and they go out.

I contacted jaberwok when the first one failed his response was of the tough luck ilk,  when the second one died I just ate it.  I ordered two referbished ones from eBay last week at $135 each I'm not going to sweat it.

I'm just saying buyer beware on these used psus

I would not recomend this gear , i dont know if its becase of the breakout boards or the psu's being old used POS but

i had two PSU's die in a matter for 3 months after purchase.  Now i have to resot to buying brand new PSUs from Ebay to replace these doorstops

if these ones die too it has to be an issue with the breakout boards.   

The cables on the other hand are great but i would be cautious when purchasing the Heavily used PSU's and Breakout boards

you all say that but right now  I dont see any sp20s anywhere even on this forum for less than 500.

please post links of these magical unicorn sp20s selling for $350, heck i'd buy them myself to resell.

im shipping from the US sorry for confusion, the market for Sp20s is steady at 600USD minus shipping

I dont plan on selling them separately

** updated the sp20s with mining stats and admin page and asic stats ***

One of the sp20s has a flakey asic so only hashes at 1.2  sometimes but if you reboot it a few times it gets back up to 1.5 TH.
The sp20E is solid at over 1.7 TH with 35 deg cooling, or 1.6 TH with poor cooling.



http://www.ebay.com/itm/301697394788?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649


http://www.ebay.com/itm/301697398062?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649


I also have an sp30 for sale 4.2 TH box ( also has a flakey asic)  With good cooling though the asic will not overheat and the hash rate is
stable at 4.3 TH if you have 240V and 35 deg cooling.  Otherwise you will see around 3.9 TH at .65 .  As you should know the sp30s are super sensitive to temperature the colder you can get them the more hash rate and stability you will see imo they are more suited to a data cen

I already have a sale in processes for the sp30 but I would rather sell everything to one buyer with Escrow of course and delivery confirmation



All units come in in  original boxes , all are super clean and basically in like new condition, i've not run them for a few months more focused in scrypt hardware right now since my electricity rate climbed a few cents this summer.

pricing i want $600 for the sp20E , $400 for the sp20

and $2000 for the sp30.

buyer pays shipping to US and Canada only

Even if this was true , their prices would be way too high, the initial A2 was way overpriced , if you have .06 cents power the A2 would still be a better deal assuming  you can get a working unit lol.

I have two units that behave differently  

-both started out with bad PSU's 1k watt PSUs came with the units even though the Innosilcon claims that the units need 1200Watt+ psu
they just happened to shit with defective 1k watt PSUs hmmmm.

To the problems

- the first unit powers up when none of the asics are connected to the PSU.  If I connect even a single of the six ASIC boards the
unit will not power up.  There are lights on the controller board and on the rasbery-pi but the fans don't spin asics don't light up.

-second unit powers up but the asics do not initialize , the LEDs on the asics all flash red , similarly to when normal units first power up .


I have tried single Asics connected , multiple PSU's from 1200Watts to 1k watts to no avail.

Anyone ever experience anything like this ?

I just want to ship the damn units back to be honest but they claim the issues can be resolved would pay LTC/BTC bounty if someone get these up and running otherwise ill just have to pay the shipping price to get these replaced.

It makes it hard to place an order for any other units currently out there, these seem to be the most effient and also being new would have the highest resale value.

1200 is too high though.  We need have someone work with SFARDS to do a huge order 200+ units and get them at around 900 per unit and BRING back home mining for the

masses !  (Bring back Voltron lol). 

I personally would order 10-15 if the price was 900 or so USD

the units ere never $1399 they were $1499.00 at their lowest.(might have been $1599 actually)  I got the coupon too but chose not to use it no way I'm ever paying Zoomhashes shipping tax again.
  The price would have been : $1099 after coupon and  then with shipping $1299 so around $1300 still a good price though.  but way higher that the 2277 for two you quote.

I've ordered s4's in the past from zoomhash and they do the same thing with the shipping you don't see it till you are about to pay.
1

how can you tell the 90MH/s version vs the 10 ? 5 blades vs six ?

one thing to remember the supposedly 110 mh/s unit is actually 100mh/s  it only runs at 111 in turbo mode and not very effeicentlty at that.  Ive clocked it at an extra 240 watts just for the addtionall 11mh/s

better to run them normally at 100mh/s for 900-1000watts.