This one makes me confused.

Are you going to send 0.05BTC to Coinbase offline?
Or you have a problem with your ledger after you replace your broken ledger with a new one? Is it show incorrect balance in your ledger nano?

If it shows the correct balance from your Ledger live with your new ledger nano sending 0.05BTC should be work without confirming it unless if the balance show is lower than the sending amount.

And about deleting and adding an account in your new ledger nano with ledger live it must synchronize first so that the ledger live will request new data transaction history from the blockchain.
Once it's done it must show the correct balance and able to send any amount you want to any addresses of your choice.

If you follow the method from Bitmain "How to set up V9 V1.0 test jig manual for S9, S9i, S9j, R4, DR3, T9, Z9, Z9 mini"
But the problem still occurs try the firmware from ZeusBTC you can download the firmware from this link below.

- Test Fixture TF Card File

If still not, maybe your v9 controller is faulty.

If you didn't backup it before you can't able to back up it today if it's already replaced with a new one.

Have you tried to search the old wallet on your hard drive may be the old one still exists on your hard drive?

Use some tools like "Everything" where you can easily search a file without long loading.

Use keywords like .key or wallet or mbhd.wallet.aes for multibit HD

Once you found the old one make an original backup copy before you extract your all private keys.

Is that the telegram? Do you receive a message from someone pretending to be a coinbene support or admin?

Look at their message it's the same as what I encounter on telegram days ago they are fake support and admin until you are convinced to send BTC or send private keys or seed phrase. There are lots of scammers on telegram be careful they are pretending to be a support or admin.

I suggest you only contact them using this email support support@coinbene.com and wait for their response than answering those fake admin/support in telegram.

It's obviously spam because you are looking for the cheapest stable coin but almost all coins are the same and equally stable at $1.

What actually your purpose in asking them? They are all stable coins or you might be talking about withdrawal fees when withdrawing this stable coin?

Well, that's what I see in your topic that is why they got deleted from the mods or were reported by someone because of that title.

If you are in hurry or broadcasting the raw transaction on Bitcoin core still doesn't work then your best option is to get the raw transaction and broadcast them on any broadcasting sites.

To get the raw transaction use this command in the Bitcoin core console


Also, I think you can also get the raw transaction through GUI, open your unconfirmed transaction and then right-click and look for "Copy raw transaction".
 

The result must be your raw transaction copy them and go here https://coinb.in/#broadcast or https://www.viabtc.com/tools/broadcast
Paste them then broadcast.

It will show on the block explorer once you broadcasted it.

I'm actually using Binance and almost all coins there have an option of these from the Binance chain, TRC20, BEP2, and ERC20 on withdrawal.
I'm using some of them TRC20 and BEP2 just to reduce the withdrawal fee when transferring them to another wallet or in other exchanges like Okex they support TRC20 for depositing.

I think the reason why they have these options is to help the community or traders to get fewer fees if they are going to withdraw them or transfer to another exchange. This is their solution for congested blockchain networks and high fees.

The NotFuzzyWarm suggestion is right the red light signal from your miner might be a signal for high temperature.

To troubleshoot them start from the software before you touch anything on the hardware.
If you can push the fan speed more try that first if not try to flash it you can find firmware from this link https://download.canaan-creative.com/

If it still keeps restarting try to disassemble your unit and clean them. Maybe your miner has full of dirt and dust that is why it's overheating so cleaning them might solve your issue.

I think even you can find any exchange right now out there that you can buy ETH without KYC the $25 is not enough to withdraw or transfer your ETH to another wallet. The transaction fee for ETH right now is high and I'm sure exchange like Binance as the sample they ask of 0.005 ETH withdrawal fee which is around $16 in USD.

So not worth it if you are going to buy ETH on exchanges.

P2P is the best option like the above said there is someone here on the forum that I think you can buy ETH with bitcoin check this section below.
- https://bitcointalk.org/index.php?board=53.0

The website still exists but the problem they turn into a feeds/blog for bitcoin casino and I think the domain was sold years ago.

Since the domain still has much traffic I think to get benefits they are going to promote a bitcoin casino. The weird thing is that I can't find any links for casinos from their site it seems the site still not finish yet.

I always received this on my email every time I log in well I'm always using incognito mode to avoid any plugins to logs my keystroke or logs my activity.

The reason may be because they don't detect any cookies from your browser that is why they always send you "Authorization of new device".
Like bitmover said there is no problem with the Binance security I actually enabled all security verification email, number and 2FA so for me it's impossible for someone to hack my account on Binance.

I doubt about whitelist my IP to get rid of this but it seems that they don't have it on their settings. Whitelisting is only available for withdrawal addresses.

Adding this from ranochigo post above.

If you don't know how to use BTCrecover I suggest, try to learn first from video tutorials on how to recover the backup seed.

Here are some videos

- https://www.youtube.com/watch?v=Rp9n53XM3RI
- https://www.youtube.com/watch?v=XXw6dP7OPR4

And also check this BTCrecover documentation https://btcrecover.readthedocs.io/en/latest/Seedrecover_Quick_Start_Guide/

Do you remember if when you created your wallet from Blockchain?

It must have a 12-word seed phrase you might be saved it to notepad anywhere on your PC. Try to search it on your laptop with keywords like seed, secret, or recovery phrase and maybe you can find it.
You can use that seed phrase to recover your wallet and you can able to access your wallet again to check if you have a balance. If you only have a wallet ID then you can't able to check your wallet balance unless if you have access to this wallet that is why they're suggesting to brute-force your wallet.

This is not going to work ASIC chip from s19 is different it has IC in the middle compared to the old ASIC from s9.
And they are totally different so you might experience some compatibility issue if you are going to replace the s9 ASIC chip with the s19 chip.

Unless if you can able to modify the whole program of the miner to use the s19 chip and modify the PIC program of each hashboard.

Much better follow what suggested by HagssFIN and you can save your time.

Can you try adding this parameter below


Then run bitcoind again.

If it doesn't work try to stop bitcoind again and add this command below when running bitcoind
Sample:

Have you tried to set the pool through Innomonitor software?
You can download innomonitor from here https://www.innosilicon.com/html/support_en/tool.html
Then change the pool using that software. If not work it might need to flash via TF/SD card.


Do you have any idea if what t2th+ control board is?

Check the control board physically if it's the g9 or the g19 control board.

If it g19 then try to flash it through SD card you can download the boot image under "Innosilicon A4+ Miner" in their download page.

Check these below

I found this on their documentation.

Tmax is the maximum chip temperature(It means it reads the highest chip) and the temp is the ambient temperature(and this one is for temp board I guess).

Are you looking for Tron original website?

Or are you just asking about this website?

It seems that this is another scam site according to them that you will receive x2 of what you deposit it's the same as other scam site asking deposit and promising to return it in times two.

The other thing is I tried to check it with Whois but doesn't show any info or if when it was registered. If it shows nothing on whois it means that the domain just registered recently which I think just made for scamming purposes and possibly you're promoting it?

How did you found this?

If you have the private key you can import it on Bitcoin core through command.
Do you have the private key?

I heard that old doesn't work on Electrum but can you tell us what is your backup key first character?

What I think is that if the old address doesn't work on Electrum try to convert them using this tool https://www.bitaddress.org/
Then go to wallet details and paste the private key it should show two different wif private key compress and uncompressed private key.
Use the uncompressed private key and import it to Electrum.

How did you know that the temp is fine?

I couldn't see any temp from your kernel logs.

Can you try this post first below someone there has the same issue when showing a wrong chip data and then shutdown adding some command like no sensor scan might help try the suggestion from the post below

- https://bitcointalk.org/index.php?topic=5036844.msg50152417#msg50152417

Or try other custom firmware

Here check this one
- https://bitcointalk.org/index.php?topic=4513567.0

Or this one https://bitcointalk.org/index.php?topic=5127323.0
And then try to lower the freq and lower the ASIC voltage board.