Ok, also bought one. I only hope Neil also buys one and adapts MinePeon to use it... Well, unless I don't have the time when it arrives, I'd probably go to the trouble of making it hot pluggable for cgminer anyway - so as long as you are running cgminer it would see it and display info on it. But we'll see what happens when it arrives I'm worthless in Linux. When making the program, please let it configure a remote IP, instead 127.0.0.1, as we can put it in another RPI (I for instance have 3) to display the info from cgminer of the one mining...
|
|
|
Ok, also bought one. I only hope Neil also buys one and adapts MinePeon to use it...
|
|
|
I need someone to talk me through getting my block eruptors mining. I have SSH set up, pi connected to internet. I am just useless at setting up the software. As I said I will pay 0.5 bitcoins to help me through this! Prefferably will have to use some kind of chat. skype etc..
Don't waste your money. See this thread ( https://bitcointalk.org/index.php?topic=137934) and pay attention to the USB HUB you are using to connect the USB Block Erupters to your Raspberry Pi. I have one of my RPI's mining with 2 USB Gizmos, getting a stable 671 MHash/s, with MinePeon. Good luck.
|
|
|
And they aren't being sold for BTC? Ridiculous.
Did you tried to read the topic of this thread? Topic: Bitcoin T-Shirts and embroidered polo shirts paid via BTC I paid in BTC! Did you tried to buy one? Order Information
Order Details Order ID: #490 Date Added: 04/07/2013 Payment Method: Bitcoin Shipping Method: Flat Shipping Rate
|
|
|
... im worried about that too (maybe not sold in german section but he sold something somewhere) ;( especialy bcoz of yxt signature now he have only "official ASICMINER Block Erupter reseller for Europe" but 2days ago it was somethng like this + "i ship today more units than bfl ever" anyway still waiting for news that should be today yxt had " i ship today more units than bfl ever" in he's signature from the time he sold the first thousands of USB Blocks Erupters, when the price was 2,46 BTC... Remember? I bought 2 from him at that price.
|
|
|
Bought one BTC Polo shirt. Thank you.
|
|
|
... olha a ideia aqui: Devem ficar bem fresquinhas. play ficamos aguardar, boa sorte no desenvolvimento. A ideia é interessante, mas eu substituiria a fita plástica (que pode ferir/arrancar componentes) e usaria 3M thermal tape.
|
|
|
I hope this project has legs to run. I'll keep an eye on this thread and I intend to buy one Xcrowd 30 GH/s Pavonis Bitcoin miner, if I'm still alive at that time.
Good luck for your project, xcrowd. Best regards.
|
|
|
... There is a lot that I could do if I had the cash, SMS alerts, Android & IOS Apps with push notifications, VPN Tunneling, Remote Access.... the list goes on. With everyone donating there little bit though I am hoping I can do it all without anyone having to 'pay' for anything (especially me ), we will just have to see how it works out. ... Neil I already wrote this in this thread, but I repeat: Why don't you open a BitcoinStarter Project @ https://bitcoinstarter.com/projects, Neil ? Why should he ? He could get more BTC in less time and also advertise MinePeon to more people.
|
|
|
... There is a lot that I could do if I had the cash, SMS alerts, Android & IOS Apps with push notifications, VPN Tunneling, Remote Access.... the list goes on. With everyone donating there little bit though I am hoping I can do it all without anyone having to 'pay' for anything (especially me ), we will just have to see how it works out. ... Neil I already wrote this in this thread, but I repeat: Why don't you open a BitcoinStarter Project @ https://bitcoinstarter.com/projects, Neil ?
|
|
|
I also want one, but must be red.
|
|
|
WOW Vou esperar 24 horas, para verificar se há ganhos na taxa de Hardware Errors, que até agora era de 1%, com ventilação forçada. Ok, teste efectuado de quase 1 dia, resultados inconclusivos. Se por um lado, temos uma redução dos Hardware Errors num dos Block Erupters ( 0,60%), temos um aumento significativo no outro ( 1,15%). Mas a minha conclusão, apesar dos resultados obtidos, é a de que um chip a trabalhar a uma menor temperatura (34º contra os 42º sem dissipador), terá uma maior duração, seja ela qual fôr a expectável. ... Eu continuo na minha... Acho muito caro, e dificilmente vais rentabilizar isso... Como eu referia no post #20, "...por enquanto é um hobby, pois tenho gasto muitos BTC e recebido poucos BTC.".
|
|
|
WOW Vou esperar 24 horas, para verificar se há ganhos na taxa de Hardware Errors, que até agora era de 1%, com ventilação forçada. Ok, teste efectuado de quase 1 dia, resultados inconclusivos. Se por um lado, temos uma redução dos Hardware Errors num dos Block Erupters ( 0,60%), temos um aumento significativo no outro ( 1,15%). Mas a minha conclusão, apesar dos resultados obtidos, é a de que um chip a trabalhar a uma menor temperatura (34º contra os 42º sem dissipador), terá uma maior duração, seja ela qual fôr a expectável.
|
|
|
Também com tantos ministros a demitirem-se...
|
|
|
Neil, what features have costs associated with them and how much do they cost?
My mining setup is small, and will probably remain that way, but I REALLY want to support you. What do you think about putting up a list a features that have costs (+ some more for your time) and then adding in a bitcoin address for each? That way you get the funding you need, AND you can tell which feature is most requested by people that actually matter (people that will pay you).
I was trying to figure out this hidden Easter egg you guys were talking about... I looked all around and I heard no sounds or a ple... then it occurred to me and i set my donation time to 0, sure enough... HOW could you THING of not even donating 15min of your time! I would NEVER have found this without it being pointed out to me:P
And what about opening a BitcoinStarter Project @ https://bitcoinstarter.com/projects ?
|
|
|
Congrats, Unacceptable. And i love the mugs.
|
|
|
O que é vocês pensam da Kncminer? De momento parece-me o melhor investimento em termos de mining...
US$ 3,795.00 está muito acima das minhas possibilidades, mas 200 GH/s é simpático... quanto ao de 400 GH/s, não quero ir assaltar um banco...
|
|
|
ct1aic,
Achas que isso compensa? Eu estive a pensar me comprar, mas.... hummm o preço ainda não me convence...
xmax, o preço pode não ser o melhor (já desceu para 1.1 BTC), mas à falta de melhor... O Jelapeño deve chegar no Outono, assim como os Klondike16... e as gráfica são caras e gastam muita electricidade. Pois as gráficas gastam muito... Eu tenho 12 - 7950 e aquilo a consumir electricidade, cuidado!!! Tens ideia de quanto vais pagar de taxas alfandegárias pelo teu Jelapeño? Quando se começou a falar em asics, tive com duas maquinas encomendadas. Uma na butterfly labs e outra na avalon, mas depois apareceu uma conta para as finanças e eu desisti... Bem que me arrependo agora! Não pela butterfly labs mas pela avalon. Penso que na altura custava 1200 dolares... Tinha sido um dos primeiros a receber... A culpa foi do Gaspar, LOOLL Pois... mas o Gaspar já era. Pelo Jalapeño, espero pagar os 23% de IVA dos 274 US$ e dos 88US$ de shipping. Só espero que não incluam factura, para não pagar o IVA do upgrade de 5 para 7 GH/s (100 US$).
|
|
|
ct1aic,
Achas que isso compensa? Eu estive a pensar me comprar, mas.... hummm o preço ainda não me convence...
xmax, o preço pode não ser o melhor (já desceu para 1.1 BTC), mas à falta de melhor... O Jelapeño deve chegar no Outono, assim como os Klondike16... e as gráfica são caras e gastam muita electricidade. Com a Radeon HD 7870, consigo 450 MH/s mas gasto mais 120 watts a 230 volts e com cada USB Gizmo, 336 MH/s e electricidade quase não mesurável.
|
|
|
Já agora, pergunta pra a parvoice....
Vcs Compram, Vendem, Minam ou é so Hobby e/ou Interesse, etc, etc ?
Eu mino... Gostava de comprar tb mas é muito lento... https://bitcointalk.org/index.php?topic=191590.msg1986598#msg1986598 - fiz um post com a construção das minhas maquinas, mas tenho que mudar de host para as fotos... Atenção que eu não sou informático isto foi uma luta LOL Eu costumo colocar as fotos num web server que tenho em casa (e que também uso para minerar, com a gráfica Asus Radeon HD 7870). Mas desta vez, enviei as fotos para o Facebook e ao visionar cada foto, botão direito do rato e "Copy image URL". Depois é só colocar o link entre o {URL}{/URL} com {}=[].
|
|
|
|