Copy this exactly. Only changing what's underlined: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 vertminer.exe --scrypt -o stratum+tcp:// your pool: PORT -u MyUsername -p MyPasswordBut before you run, delete the old config file and all .bin files. If it works, go into settings to write your own config file. Once it's generated, you can tinkle with the settings. You don't have to put your parameters in your .bat Let me know if it works. I do: Mine.bat: mode CON cols=96 lines=32 timeout /t 60 set DT=C:\Users\miner\Desktop set VMINER=%DT%\vertminer-0.5.3
setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 del %DT%\*.bin
%VMINER%\vertminer --scrypt-vert
pause
However, I don't know how to fit all those options on the comamnd line, which is why I have always used the conf file. Are you suggesting that I just start vertminer with just the -o/-O options and nothing else?
|
|
|
Surely you meant previous posts; plural, right?
|
|
|
Yes.... with the caveat that I'm not familiar with this software ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) That's what I do with cgminer. Let me try to find something that might work... Is there an option to Write your settings using vertminer? If so, that's the option that creates your personal config file. Also, delete all the .bin files from the location you have the miner before you start. The .bin will tell you your TC. I do: Mine.bat: mode CON cols=96 lines=32 timeout /t 60 set DT=C:\Users\miner\Desktop set VMINER=%DT%\vertminer-0.5.3
setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 del %DT%\*.bin
%VMINER%\vertminer --scrypt-vert
pause
However, I don't know how to fit all those options on the comamnd line, which is why I have always used the conf file. Are you suggesting that I just start vertminer with just the -o/-O options and nothing else?
|
|
|
Starting posts: 920 Bitcoin address: 1JUj1XL89eDAmpUSrq6tzMZLrSwMzYpJ3f
|
|
|
How do I apply?
Please use the following format... Starting posts: Bitcoin address: Make sure that u have 50 posts before 17th. Thanks! Do I add the signature now?
|
|
|
I cut-and-pasted your R9-280x settings into my vertminer.conf file. It went down from about 260KHs to about 185ksh with the new settings. I have a different brand gpu though. Could it make that much difference?
Most def! Bummer. Ill have to get the brand details and search this thread to see if any others have matching HW. It's much easier if you begin by tuning just one card (at least for me). I suggest to dump these parameters; delete the config file, and build your own. Do you have a .bat created to start cgminer?
|
|
|
With something trustworthy like PrimeDice it's basically a guaranteed $0.50 per constructive post. I don't encourage signature advertisements as they produce a lot of spam, but if you can make good contributions to the forum then you may want to consider it to help pay back the loan.
WHAT! I've been missing out!
|
|
|
I cut-and-pasted your R9-280x settings into my vertminer.conf file. It went down from about 260KHs to about 185ksh with the new settings. I have a different brand gpu though. Could it make that much difference?
Most def!
|
|
|
Have you tried using just one card to test the settings? No luck trying to get vertminer to work on 4x 7850s. Suggestions?
|
|
|
Good luck with your business! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Is this all you have to say? I must say Vod, I'm a little disappointed.
|
|
|
Do you have the PCIe power connected? I have a MSI 990 and 880, both FX. The 990 would not boot at all without the PCIe power. The 880 worked for 2 months with it and one day wouldn't come back after a reboot until I connected the PCIe power.
With both boards, all the blue lights came on but it would not post.
Thanks for the input! Yes, I actually have to connect the 8 and 6 pin molex along with the PCIe cable to the PSU. I think the BIOS is corrupted... that's what hours of trying to find a solution online led me to believe anyway.
|
|
|
Is it just me, or does anyone else think Nik1ab is looking to start trouble?
|
|
|
Things have to start somewhere or everything would be stagnant.
And I agree. Count me in for 20... I'm about to enter the trading scene full force - what are you planning on doing with this bot once it's fine tuned?
|
|
|
Hi ,
I'm running 2 x 6 Gigabyte R9 280 - using SMOS LINUX with Vertminer 0.5.4pre3
I'm using same settings as with "normal scrypt" like litecoin except that I have to lower GPU CORE FREQ. TO +- 1000 Mhz - hashing 350 Kh/s with +- 6-8 Kh/s variance.
Aren't you supposed to get about 1/2 normal hashing power mining coins that use the N-Scrypt algorithm?
|
|
|
Stupid Ponzi Bitcoin Idiot Casino Scammers ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) And you somehow think this is funny?! Learn how to use emoticons
|
|
|
Should you not, you will anyway; this is a very weird sentence,isn't it?
It's takes a lil bit to get used to the structure of LostDutchman's questions; anyone else agree?
|
|
|
Damn - wish I could take you up on this offer. But I do know a couple of folks looking to get into mining; this would be perfect for them. If one is interested and if it's still available, I'll let you know tomorrow.
|
|
|
|