I am seriously lost I have followed the power up guide with Molex cables but yet when I connect the blade to my PSU the Blade blinks a few times then the PSU shuts down every time. I added the images of my power supply and the setup I am using. I would like to get this started as fast as possible. I hope I added the images correctly if not you can still click on the links I believe or let me know how to do it properly but I would really greatly like to get my blade working very soon
Well I noticed on the Y-connector cable that the wires are very thin compared to molex cables or psu wires I ordered a molex like the one in the guide so hopefully when I plug that one in it will work so tomorrow when it comes in I am going to try like the guide then I can go from there if it doesn't work.
Well this Y connector that I got has in the connecter part it has 2 red 2 black 2 black 2 orange I tried plugging in 1 red and one black blade blinks a few times and Ethernet shows an orange light periodically blinking green shows that it's connected but when I type 192.168.1.201:8000/main into the browser it takes me straight to bing.com showing me a links to routers and ip addresses then I tried just like in the photo 1 orange 1 orange because those are the wires that say 300v on them just like yellow cables when I do this the PSU turns on blade blinks a few times then shuts down PSU I would really like to get this working but so far the reds are the only cables making it so the blade shows activity but it won't take me to the configuration page.
Well I bought this Y-Connector Cable from radio shack is just like a molex just different colors the Orange wires say he exact same things as the yellow wires on a Molex. It would shut down my PSU when I had the two oranges hooked up where the yellow and blacks are shown in the guide. Then when I plug in the red wires it shows it's getting power by the Ethernet port on both the blade and the router lighting up. I have a Molex on the way but I am impatient and losing BTC that keeps rising and it's getting frustrating.
Not trying to hook two psu together lol no I just want to take the same yellow and black cables from an old PSU connect them to a different plug and wire them to the green connecter and plug in the blade I had tried to use a Y-power cable connector but it wouldn't power on the blade it would just blink a few times and that was it.
Do these stay solid green until they start hashing like the USB Block erupters? I need to know I but a Y-power cable and that didn't work so I had to order the Molex. Never go orange black black red lol good thing I was watching the blade when the wire started smoking.
I hope I can get my blade setup soon I am losing money and I have a nice cold place for it out in the shed and it snowed last night so why do I need a fan hahaha.