If you mean solo mining to your own personal node - thass another story. AFAIK the more recent versions of Bitcoin Core (the node software) no longer supports that so the pool operators do some addition coding for it to work.
Thats wrong, bitcoincore does support solo mining. After the changes in the gbt protocol, cgminer and ckpool could not decode the gbt right, because of the changes made in bitcoincore. Using bitcoincore 0.18.1 does still work with the last version of cgminer for solo mining. So until no greater change in bitcoincore is made, you are fine using that for solo mining. The changes are documented in bitcoincore and could be implemented into cgminer or ckpool for beeing up to date.
|
|
|
It would be helpfull to include some pictures from the dead psu, so we can see a bit more.
The 3.88V could be anything, without knowing the origin of it. The Mosfet need a negative voltage (or a negative offset) so you should begin to draw some sort of schematic for fault finding.
|
|
|
Am besten mit einem eigenen Block Explorer. Dieser hier zum Beispiel: https://github.com/janoside/btc-rpc-explorerBenötigt natürlich einen eigenen Node und Rechenleistung sowie 1 TB Festplattenspeicher. Abfragen erfolgen als rpc-call über ein shell-file (zum Beispiel bei größeren Listen)
|
|
|
Mal eine Frage in die Runde.
Damals wollte ich mal einen Yesminers Gruppenkauf erstellen, da ich mir selbst auch Miner kaufen wollte. War ein verlockendes Angebot und bis wir alle es im Forum als Scam erkannt haben, hat es eben ein paar Tage gedauert. Der Mist hat mir damals zwei negative Trust gebracht, was ja auch verständlich ist. Ich hätte auch nie Geld kassiert, vor allem fließen lassen an yesminers wenn ich nicht 100% sicher gewesen wäre (Testgerät in meinen Händen hätte).
Aber die User sind seit 2015/2016 offline und können die Situation nicht mehr berichtigen. Wer mich kennt weiß sicherlich das ich einer der alten Hasen bin der niemals einen Scam unterstützen geschweige selbst scammen würde. Die zwei Trust regen mich aber persönlich auf und daher die Frage ob und wie man die irgendwie loswerden könnte...?
Irgendwelche Ideen?
Viele Grüße Willi
Du könntest einen neuen Nick erstellen, ok, bei null Anfangen. Sonst sehe ich da nur die Chance das die "Inaktiven" User nach ein paar Jahren bereinigt würden und somit alle Einträge gelöscht.
|
|
|
was hat dieses CPU/GPU gesabbel mit Bitcoin Mining zu tun? Genau, gar nichts. Könnte man ja dann auch einfach mal in den dafür vorgesehenen Bereich verschieben.
|
|
|
you are missing 6 Asics on the last chain, try to go to Miner config and reduce the start frequency to 575 and restart the miner.
|
|
|
OK, I now add the connect= entrie to both core PCs, and now it works. Maybe I was to stupid to choose the right one. Now the Core24H connect to the wallet core PC in the bitcoin.conf. That works now, and I will report, if that is now quicker or not. I was maybe thinking the wrong way! Sorry for that.
before: bitcoin.conf only changed on the walletPC connect=core24HPC walletpc => core24H does not work
after: bicoin.conf changed on core24H connect=walletPC core24 => walletPC works fine
I removed the connect entrie on the walletPC, and the connection works still fine, so this must be done from the sender side, not from the receiving side.
Thank you for the Help!
@LoyceV: I did that, but then the reorginize tooks longer ;( , so that does not help.
Edit: clear things up, for maybe the next one who searched for that
|
|
|
I also use bitcoin core . Is there a command, addnode or so that i can help you with, from the configuration of my wallet? thank you for your offer, but no. I allready use addnode for the 24H Core PC, and that is not my problem.
|
|
|
thank you for the reply, yes, my Nodes allow incomming connection. The conf is loaded, If I watch Debug/Network connection, the ip of the core24H PC pops up, then went away, and no connection/transfer is made. But, if that will not help me to speed up the sync, then I can stop right here. Reason is, I do not use the wallet so often, sometimes once a month, and that take forever to sync over the internet because of my poor internet speed. So I was thinking, let use the other 24H core and sync from there. [main] rpcallowip=192.168.2.0/24 rpcuser=xxxxxx rpcpassword=xxxxxxx rpcbind=192.168.2.110 rpcbind=127.0.0.1 rpcport=8332 # Only connect to core24H connect=192.168.2.234
|
|
|
Hello all, maybe a stupid question, elswhere allready answerd, but I could not find it. I got two PCs running core, one 24H and the other just if needed for my wallet. I want that the wallet PC only connect to my 24H Core PC dircetly and update the blockchain. Reason is, I think that speed up my update. Both PCs are in the same local network. I tryed it with 'connect' in bitcoin.conf, but the wallet just connect to the internet. I also tryed 'addnode' but that does also only connect to the internet. Maybe someone can write down the needed conf entries, to do the wanted connection. thank you
|
|
|
Uhhh, Jehova (Aber das wollen wir mal durchgehen lassen)
|
|
|
Can you show the System Page, or list the Hardware Version and Logic Version, as well as the File System Version. I will the look in my saved Firmware if I got a copy of that.
|
|
|
Demnach gaben 30 Prozent der befragten 18- bis 24-Jährigen an, dass die sozialen Medien ihre wichtigste Nachrichtenquelle seien. Also 30% unserer Zukunft lebt in einer Blase, die von Algorythmen der Betreiber bewußt zum Zwecke der Bereicherung aufgebaut wurden. Ja, das halte ich auch für Gefährlich. Wobei man nicht weiß "welche" Blase da Erzeugt wird, das wissen nur die Nutzer, oder eben nicht. Edit: das war jetzt schwer Offtopic. Aber 70% scheinen sich auch "üblich" zu Informieren, bzw. gemischt, also scheinen nicht alle "Verloren" zu sein.
|
|
|
That might be right, but I would never trust such a firmware. Most of them make use of the api (thank you for the excelent API-Readme in cgminer). But hiveon secured it extra, so blocking of their comand and control IP, stops the mining in total.
My solution for that is, do not use it. If someone want a change, compile your own version, all Information are out there in the wild, you only need the will to do it (don't be lazy).
|
|
|
Hallo nach Germany von USA. Ich bin eine Deutsche Oma hier in USA und wuerde mich riesig freuen, wenn mir jemand helfen kann! Es sieht ja so aus als wenn hier einige ehrliche Leute sind: Ich hab im Dec 2020 LTC von Bittrex zu Coinbase senden wollen. Es kam nie an, sitzt auf der Blockchain und Blockcypher mit einer anderen addresse als UNSPENT. Mein fehler war, ich hab bei Coinbase auf RECEIVE geklickt in der Litecoin wallet, und die Coinbase haben BTC angezeigt und ich hab diese BTC emfangs-adresse dann in Bittrex eingegeben. .Ich hab diese kleinen feile nicht gesehn , wo man die entsrechende coin aussuchen muss, dachte es waere die Litecoin adresse. Bitte, ist da jemad der mir helfen kann? Es waere eine riesen hilfe!! Ganz lieben Dank schon mal, Christina
Hallo Christina, deine LTC wurden also an eine BTC Adresse gesendet, verstehe ich das richtig? Wenn das so ist, und das LTC Netzwerk hat die Adresse angenommen, sind deine Coins futsch. Es sei denn, du hast den privat key zu dieser Adresse. Leider hast du weder die Adresse noch den txid gepostet, so kann niemand hier nachsehen ob das so ist.
|
|
|
Ich bin sehr gespannt, wo das Ende dieses Bullenlaufes sein wird :-)
na im Bärental natürlich
|
|
|
Kein Problem, wenn du Zeit hast einfach mal versuchen, dann habe ich mir die Mühe nicht Umsonst gemacht.
Eventuell mußt du diese Zeile auf dem BananaPi weglassen, da es ja keine Boost im Repository gibt: Abhängigkeiten zum Kompilieren Installieren: sudo apt-get install libevent-dev libboost-system-dev libboost-filesystem-dev libboost-test-dev libboost-thread-dev
Auf dem PI3 unter screen (hatte ich vergessen zu verlassen) hat das ganze ca. 2 Std. gedauert. Ich habe dann einfach ./bitcoind gestartet und es ging echt Problemlos. Kein Konvertieren, keine Reorganisation Notwendig.
|
|
|
Damals™ ja, aber dann wurden die Satoshis verteilt: 2013-10-07 16:55:29 XD
|
|
|
Hier nun die Anleitung zum Kompilieren von core 0.21.0 auf einen RASPI3 mit RaspianOS (Debian Buster): Alle Befehle werden mit dem Standard User durchgeführt, so das dieser auch Besitzer von Core ist. Ich hoffe, das es auch auf dem BananaPi so geht, bitte Probieren. sudo apt-get update sudo apt-get upgrade
Hier nun Prüfen, welche Version RaspianOS nun installiert ist: dies sollte das Ausgeben: 10.7 ein neues Verzeichniss Erstellen: und in das Verzeichniss wechseln: Nun die Sourcen von Core 0.21.0 herunterladen: wget https://bitcoincore.org/bin/bitcoin-core-0.21.0/bitcoin-0.21.0.tar.gz und entpacken: tar xfvz bitcoin-0.21.0.tar.gz oder Wahlweise auch über git: git clone https://github.com/bitcoin/bitcoin.git Nun die Abhängigkeiten zum Kompilieren Installieren: sudo apt-get install autoconf sudo apt-get install build-essential libtool autotools-dev automake pkg-config bsdmainutils python3 sudo apt-get install libevent-dev libboost-system-dev libboost-filesystem-dev libboost-test-dev libboost-thread-dev sudo apt-get install libzmq3-dev
Jetzt geht es ans Konfigurieren: Zuerst das Buildsystem: Nun die Bitcoin-core Konfigurieren, hier ohne Wallet, ohne gui (also kein bitcoin-qt) und ohne upnp ./configure --disable-wallet --without-gui --without-miniupnpc
Wenn das durchgelaufen ist erhält man folgende Ausgabe: Options used to compile and link: boost process = no multiprocess = no with wallet = no with gui / qt = no with zmq = yes with test = yes with fuzz = no with bench = yes with upnp = no use asm = yes sanitizers = debug enabled = no gprof enabled = no werror = no
target os = linux build os = linux-gnueabihf
CC = gcc CFLAGS = -pthread -g -O2 CPPFLAGS = -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -DHAVE_BUILD_INFO -D__STDC_FORMAT_MACROS -D_FILE_OFFSET_BITS=64 CXX = g++ -std=c++11 CXXFLAGS = -fstack-reuse=none -Wstack-protector -fstack-protector-all -fstack-clash-protection -Wall -Wextra -Wformat -Wformat-security -Wvla -Wswitch -Wredundant-decls -Wunused-variable -Wdate-time -Wsign-compare -Wduplicated-branches -Wduplicated-cond -Wlogical-op -Woverloaded-virtual -Wno-unused-parameter -Wno-implicit-fallthrough -g -O2 -fno-extended-identifiers LDFLAGS = -lpthread -Wl,-z,relro -Wl,-z,now -Wl,-z,separate-code -pie ARFLAGS = cr
nun bitcoin-core Bauen mit: Einen Size-B* Kaffeee holen und Abwarten, wenn ihr den auf habt, ist das Kompilieren fertig Heute selber kompiliert und getestet, bitcoind läuft Einwandfrei. Alle Informationen zum Bauen habe ich der Doc entnommen. QUELLE: bitcoin-0.21.0/doc/build-unix.md * Quelle: Loadingartist.com
|
|
|
|