Same here. Got my delivery e-mail now! raskul was right. Today was a good day and I'm happy  No email here what was your order # ? #10XX. Got a July batch order too? my order is #12xx s I ordered through your grp buy, I've emailed sales several time about the shipping address they have for me which is incorrect to no avail. Jul 29 23:09 Hi there I just wanted to note the address for my shipping is incorrect for my Order #xxxx Placed on May 07, 2014 10:56PM Billing Address Payment Status: paid |
|
|
|
Dear Thomas, After a successful burn-in test, we are happy to announce that your unit was shipped and is now on its way to you. The unit was shipped with DHL. Please see attached shipping documents. A lot of work was put into designing, building, and shipping that unit. We believe you will enjoy it very much. If you have any questions feel free to contact us at info@spondoolies-tech.com. Best Regards, Katya Penkar Thank you spondoolies-tech. I know I will be happy after we have discussed compensation. Same here. Got my delivery e-mail now! raskul was right. Today was a good day and I'm happy No email here what was your order # ? |
|
|
|
I am getting 140 mh/s with 280x, 110 mh/s with 7950. Temps are about 65-70...very smooth. Fans about 50%.
my boxes are all over the place , on one box all my 290s run at 140 mhz 60% fan 60-73 deg other boxes range from 130 to 139 |
|
|
|
ok, coin dead , im out mining results: insane heat, insane power usage, one broken gpu, beaware of this coin djm posted the correct settings to decrease miner form using 100% gpu. This is not x11 with a new algo need to do research on settings, start low then work up. im aware of that, this was just too much for old runner gpu i had no change to 24/7 monitoring gpus, one was lost, no big harm i keep rest of my gpus safe for now I have one GPU that keeps getting sick on this Algo , i just disabled it , hopefully it did not die. |
|
|
|
Any thoughts on why I'm seeing so many invalids........I've tried both ports 5111 and 5112 with similar results....is it possible that it is because all 3 of my machines are running with only 4GB Ram?
I run all my boxes with 16gig ram.. 4Gig seems really low, maybe pull the ram from one box into another as an experiment. I'm not a NVIDIA expert though i use AMD. I have found that lower intensites around 18 tend to give less rejects maybe you are pushing your GPU's to hard |
|
|
|
|
lots of low sell orders I'm seeing alot at 5k as well.
|
|
|
|
Using ccminer and noticing that SuperNova reporting much higher invalid % than ccminer is reporting. Anyone else noticing
this? SuperNova showing 60-85% good and ccminer reporting 94-97% good. Can anyone shed some light on this....I'm
comparing this across three separate 750ti's
here are my stats from Suprnova 100% efficiency and very low rejets My Hashrate 2,233.38 MH/s Pool Hashrate 79.51 GH/s My Sharerate 0.19 S/s Pool Workers 181 Net Hashrate 80.03 GH/s Round Information 1576 Current Block 52.75% Of Expected Shares 0.18001792 DOOM Est Earnings 2,606.24673681 Difficulty 2,236.04076365 Change in 1 Blocks Est Next Difficulty 00:02:20 Est. Avg. Time per Block Share Information Own Pool Valid 2,560 351,972 Invalid 0 7,252 Efficiency 100.00% 97.98% |
|
|
|
My SP30 is already visible at eligius: 256 seconds 5,115.93 Gh/s 304933
128 seconds 4,326.21 Gh/s 128931
5,115.93 Gh/s is way over 4.5 TH/s +-5% Lucky :-) would have been too good to be true is this stock voltage though ? |
|
|
|
a sell wall at 10k. Must be early miner.
I am early miner but i don't sell at 10k. As always, my style is either full moon or coin goes to zero and i will eat the coin.
I got in right when AMD gpu miners were added and this coin is ridiculously hard to might right its stupid to sell so low |
|
|
|
Where are you paying 600$ to host a 3kW device?
That seems a bit excessive, even for a professional datacenter.
I was pharaprasing from the previous postster the rates offered in the past were around $290 per month with the units at 2kW so extrapolating at 3kW thats closet the $500 or maybe over just looking at the worst case scenario |
|
|
|
We are reporting live from the datacenter: My sp30 has just come online. Will keep you updated as this story unfolds.  yes please keep updates coming, graphs images of UI and asic performance over and undervolted etc thanks in advance |
|
|
|
|
Network hash rate up for 75GHZ now and all that hashrate is at Suprnova !!
|
|
|
|
That's ok as far a a nice PR response, but we would really need to see this compensation plan sooner rather than later(October) as you are shipping these units now...correct? and if we receive them as opposed to them being hosted by you, the we are on the hook for either scouting for a good hosting facility which may or may not be cheaper for 3Kw or the alternative to run them in our homes, and hire an electrician if needed to add the extra power to run a single 3Kw unit, while most of us here I would have to assume and say have more than this 1 miner (assuming all they bought is 1 SP30) in their arsenal.
So as a suggestion:
- Provide the compensation plan as soon as possible
- Distribute the actual compensation as soon as possible, why would it make any sense for anyone but ST to hold off with compensation if you are offering it anyways? at least this way people may have the opportunity to pay for another hosting option or 'hire' that electrician if needed.
You could always lower your own hosting plans, but as you mentioned above that is not an option.
Just some thoughts, as most people here I would think were expecting a higher performing machine with lower power consumption with a better ROI.
That's all. nothing personal against ST at all, I think you guys are great and cutting edge.
Just trying to make it seem fair for everyone involved.
Thanks!
Fully agree here, luckily i just ordered one , and if hosting is going to cost over $600 per month I might as well find a local hosting company or run the miner from home, we really need to see what this compensation package is before the units ship. |
|
|
|
Still got nothing. It keeps telling me shares are above target
I think your intesity is too high for a 280? it should be like I 13 or something |
|
|
|
As I have a first day order and shipping starts today, my unit should come online today.
When are you going to connect the hosted units?
We are handling todays shipping and then we connect machines that left here. Same tomorrow. any images of the internals ? or at least the completed machines and also how many are you shipping each day ? |
|
|
|
I have updated my ccminer repository: expect a speed increase around 40%
can we get an updated compiled windows version please ? !xRVzSCoT!XdGIAMX9stIPYywc2Z9_yyU54B7wuoH1LONl_FCcH0g -a luffa That's CCminer, need the new SGminer build DJim updated last night : https://github.com/djm34/sph-sgminer_x11moddjm34 said "i have updated my ccminer repository....." and sry but i'm out from amd(too much consumption and crap hashrate ), i don't have all the dependencies to compile If you look at the source he seems to have updated sgminer as well. and using powerune -20 I get decent hashrates with my R9290s around 150mhz at I-20 and power user is on par with X11. |
|
|
|
I have updated my ccminer repository: expect a speed increase around 40%
can we get an updated compiled windows version please ? !xRVzSCoT!XdGIAMX9stIPYywc2Z9_yyU54B7wuoH1LONl_FCcH0g -a luffa That's CCminer, need the new SGminer build DJim updated last night : https://github.com/djm34/sph-sgminer_x11mod |
|
|
|
can you compile the new source and replace the old one ? thanks |
|
|
|
I have updated my ccminer repository: expect a speed increase around 40%
can we get an updated compiled windows version please ? |
|
|
|
My plan was to run these at home as well I was planning on installing a 240v circuit next week to host these and I was going to undevolt down to around 2kw now we are looking at 4.5 TH at 3KW we are looking at frankeneptune numbers that's a ridiculous amount of heat to have to account for. The only way I accept this deal is if I get another sp30 for a low price in October for a VERY VERY low price and this is guaranteed and I will host them both in a DC. The power miss ins a big deal heck I would probably have been happy with 4.5 TH at 2.5KW and a discounted price but now I don't know I might go the full refund route now as I don't feel this compensation is equitable enough. Either make us whole or give a full refund but either way we got fucked becase I missed out on the s3 batch 1 by investing in these.
http://www.coinwarz.com/calculators/bitcoin-mining-calculator/?h=5400.00&p=2500.00&pc=0.10&pf=2.00&d=18736441558.31020000&r=25.00000000&er=586.70000000&hc=4500.00
http://www.coinwarz.com/calculators/bitcoin-mining-calculator/?h=4500.00&p=3000.00&pc=0.10&pf=2.00&d=18736441558.31020000&r=25.00000000&er=586.70000000&hc=4500.00
as you can see from the difference this new miner spec would avagere close to $600 less per month (that's a whole BTC) than the orginal spec we were expecting, and we are not even talking about 6TH here which was higly bandied about. The way I see it is SP tech owes us the price of an additional Sp10 , and if we have to wait till October for compensation who the F knows what the difficulty will be by then ? which means we should be getting October batch miners for damn near free IMO |
|
|
|
|
Show Posts
