<?php
function cg_status() {	
	system("sudo ps -U root | grep -c cgminer > php.log",$ret_val);
	$file = fopen("./php.log","r");
	$read = fgets($file);
	if($read != 0)
		$cg_status = "run";
	else
		$cg_status = "stop";
	return $cg_status;
}

function cg_stop() {	
	system("sudo pkill cgminer > php.log",$ret_val);
}

function cg_start($pool1, $id1, $pwd1, $pool2, $id2, $pwd2, $pool3, $id3, $pwd3, $speed1, $speed2, $speed3, $speed4, $speed5, $speed6, $diff) {
	cg_stop();
	sleep(1);
	$cmd = "sudo ./cgminer -o ".$pool1." -u ".$id1." -p ".$pwd1." -o ".$pool2." -u ".$id2." -p ".$pwd2." -o ".$pool3." -u ".$id3." -p ".$pwd3." --A1Pll1 ".$speed1." --A1Pll2 ".$speed2." --A1Pll3 ".$speed3." --A1Pll4 ".$speed4." --A1Pll5 ".$speed5." --A1Pll6 ".$speed6." --diff ".$diff." --api-listen --api-network --cs 8 --stmcu 0 --hwreset --no-submit-stale --lowmem > cgminer.log &";

	$file = fopen("./run.sh","w");
	fputs($file, "#!/bin/bash\n");
        fputs($file, $cmd."\n");
        fclose($file);

	system($cmd,$ret_val);
}

function cg_log() {
	$file = fopen("./cgminer.log","r");
	while(!feof($file)){
		$read .= fgets($file);
	}
	fclose($file);
	$pattern_hashmeter = '/\(5s\)[^\r]+/';
	preg_match_all($pattern_hashmeter, $read, $matches_hashmeter);
	$cg_log .= $matches_hashmeter[0][count($matches_hashmeter[0])-2];
	return $cg_log;
}

if (isset($_POST["ip"]) && isset($_POST["netmask"]) && isset($_POST["gateway"]) && isset($_POST["dns"])){
	$file = fopen("/etc/network/interfaces","w");
	fputs($file, "auto lo \n");
	fputs($file, "iface lo inet loopback \n");
	fputs($file, "iface eth0 inet static \n");
	fputs($file, "address ".$_POST["ip"]."\n");
	fputs($file, "netmask ".$_POST["netmask"]."\n");
	fputs($file, "gateway ".$_POST["gateway"]."\n");
	fclose($file);
	
	$file = fopen("/etc/resolv.conf","w");
	fputs($file, "nameserver ".$_POST["dns"]."\n");
	fclose($file);

	$file = fopen("./ip.log","w");
	fputs($file, $_POST["ip"]."\n");
	fputs($file, $_POST["netmask"]."\n");
	fputs($file, $_POST["gateway"]."\n");
	fputs($file, $_POST["dns"]."\n");
	fclose($file);

	system("sudo reboot > php.log",$ret_val);
}


if (isset($_POST["control"]))
{
	if($_POST["control"] == "stop"){
		cg_stop();
		$cg_status = "stop";
	}
	else{
		if (isset($_POST["pool1"]) && isset($_POST["id1"]) && isset($_POST["pwd1"])){
			$file = fopen("./user.log","w");
			fputs($file, $_POST["pool1"]."\n");
			fputs($file, $_POST["id1"]."\n");
			fputs($file, $_POST["pwd1"]."\n");
			fputs($file, $_POST["pool2"]."\n");
			fputs($file, $_POST["id2"]."\n");
			fputs($file, $_POST["pwd2"]."\n");
			fputs($file, $_POST["pool3"]."\n");
			fputs($file, $_POST["id3"]."\n");
			fputs($file, $_POST["pwd3"]."\n");
			
			fputs($file, $_POST["pool1_2"]."\n");
			fputs($file, $_POST["id1_2"]."\n");
			fputs($file, $_POST["pwd1_2"]."\n");
			fputs($file, $_POST["pool2_2"]."\n");
			fputs($file, $_POST["id2_2"]."\n");
			fputs($file, $_POST["pwd2_2"]."\n");
			fputs($file, $_POST["pool3_2"]."\n");
			fputs($file, $_POST["id3_2"]."\n");
			fputs($file, $_POST["pwd3_2"]."\n");

			fputs($file, $_POST["group"]."\n");

			fputs($file, $_POST["speed1"]."\n");
			fputs($file, $_POST["speed2"]."\n");
			fputs($file, $_POST["speed3"]."\n");
			fputs($file, $_POST["speed4"]."\n");
			fputs($file, $_POST["speed5"]."\n");
			fputs($file, $_POST["speed6"]."\n");
			fputs($file, $_POST["diff"]."\n");
			fputs($file, $_POST["starttype"]."\n");
			fclose($file);

			if ($_POST["group"]==1){
				cg_start($_POST["pool1"], $_POST["id1"], $_POST["pwd1"],
                                	 $_POST["pool2"], $_POST["id2"], $_POST["pwd2"],
                                	 $_POST["pool3"], $_POST["id3"], $_POST["pwd3"],
                                	 $_POST["speed1"], $_POST["speed2"], $_POST["speed3"], $_POST["speed4"], $_POST["speed5"], $_POST["speed6"],
                                	 $_POST["diff"]);
			}
			else{
				cg_start($_POST["pool1_2"], $_POST["id1_2"], $_POST["pwd1_2"],
                                 	 $_POST["pool2_2"], $_POST["id2_2"], $_POST["pwd2_2"],
                                	 $_POST["pool3_2"], $_POST["id3_2"], $_POST["pwd3_2"],
                                	 $_POST["speed1"], $_POST["speed2"], $_POST["speed3"], $_POST["speed4"], $_POST["speed5"], $_POST["speed6"],
                                	 $_POST["diff"]);
			}

			$cg_status = "run";
		}
		else
		{
			$cg_status = "stop";
		}
	}
}	
else
{
	$cg_status = cg_status();
}

$file = fopen("./user.log","r");
$read = fgets($file);
$pool1 = $read;
$read = fgets($file);
$id1 = $read;
$read = fgets($file);
$pwd1 = $read;

$read = fgets($file);
$pool2 = $read;
$read = fgets($file);
$id2 = $read;
$read = fgets($file);
$pwd2 = $read;

$read = fgets($file);
$pool3 = $read;
$read = fgets($file);
$id3 = $read;
$read = fgets($file);
$pwd3 = $read;

$read = fgets($file);
$pool1_2 = $read;
$read = fgets($file);
$id1_2 = $read;
$read = fgets($file);
$pwd1_2 = $read;

$read = fgets($file);
$pool2_2 = $read;
$read = fgets($file);
$id2_2 = $read;
$read = fgets($file);
$pwd2_2 = $read;

$read = fgets($file);
$pool3_2 = $read;
$read = fgets($file);
$id3_2 = $read;
$read = fgets($file);
$pwd3_2 = $read;

$read = fgets($file);
$group = $read;

$read = fgets($file);
$speed1 = $read;
$read = fgets($file);
$speed2 = $read;
$read = fgets($file);
$speed3 = $read;
$read = fgets($file);
$speed4 = $read;
$read = fgets($file);
$speed5 = $read;
$read = fgets($file);
$speed6 = $read;

$read = fgets($file);
$diff = $read;

$read = fgets($file);
$starttype = $read;

fclose($file);

$file = fopen("./ip.log","r");
$read = fgets($file);
$ip = $read;
$read = fgets($file);
$netmask = $read;
$read = fgets($file);
$gateway = $read;
$read = fgets($file);
$dns = $read;
fclose($file);

if ($cg_status=="run")
	$cg_log = cg_log();
else
	$cg_log = "";

if ($cg_status=="run")
	$cg_status_color = "green";
else
	$cg_status_color = "red";

if ($cg_status=="run")
	$cg_status_info = "RUN";
else
	$cg_status_info = "STOP";

$cg_button_info = "CGMINER SETTING CONFIRM";

//if ($cg_status=="run"){
//	$cg_radio_start = '';
//	$cg_radio_stop  = 'checked';
//}
//else{
	$cg_radio_start = 'checked';
	$cg_radio_stop  = '';
//}

if ($group==1){
	$cg_radio_group1 = 'checked';
	$cg_radio_group2 = '';
}
else{
	$cg_radio_group1 = '';
	$cg_radio_group2 = 'checked';
}

$ip_button_info = "NETWORK SETTING CONFIRM";

switch($speed1)
{
		case 1330: $cg_option_speed1_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed1_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed1_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed1_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed1_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed1_1280 = 'selected = \"selected\"';break;
	default:   $cg_option_speed1_1280  = 'selected = \"selected\"';
}

switch($speed2)
{
       		case 1330: $cg_option_speed2_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed2_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed2_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed2_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed2_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed2_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed2_1280  = 'selected = \"selected\"';
}

switch($speed3)
{
        	case 1330: $cg_option_speed3_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed3_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed3_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed3_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed3_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed3_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed3_1280  = 'selected = \"selected\"';
}

switch($speed4)
{
        	case 1330: $cg_option_speed4_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed4_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed4_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed4_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed4_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed4_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed4_1280  = 'selected = \"selected\"';
}

switch($speed5)
{
        	case 1330: $cg_option_speed5_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed5_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed5_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed5_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed5_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed5_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed5_1280  = 'selected = \"selected\"';
}

switch($speed6)
{
        	case 1330: $cg_option_speed6_1330 = 'selected = \"selected\"';break;
		case 1320: $cg_option_speed6_1320 = 'selected = \"selected\"';break;
		case 1310: $cg_option_speed6_1310 = 'selected = \"selected\"';break;
		case 1300: $cg_option_speed6_1300 = 'selected = \"selected\"';break;
		case 1290: $cg_option_speed6_1290 = 'selected = \"selected\"';break;
		case 1280: $cg_option_speed6_1280 = 'selected = \"selected\"';break;
        default:   $cg_option_speed6_1280  = 'selected = \"selected\"';
}

switch($diff)
{
	case 11 : $cg_option_diff_1024 = 'selected = \"selected\"';break;
	case 10 : $cg_option_diff_512  = 'selected = \"selected\"';break;
	case 9  : $cg_option_diff_256  = 'selected = \"selected\"';break;
	case 8  : $cg_option_diff_128  = 'selected = \"selected\"';break;
	case 7  : $cg_option_diff_64   = 'selected = \"selected\"';break;
	case 6  : $cg_option_diff_32   = 'selected = \"selected\"';break;
	case 5  : $cg_option_diff_16   = 'selected = \"selected\"';break;
	default : $cg_option_diff_128  = 'selected = \"selected\"';
}

if($starttype==1){
	$cg_option_starttype_webstart = '';
	$cg_option_starttype_autostart = 'selected = \"selected\"';

        $file = fopen("/etc/rc.local","w");
        fputs($file, "#!/bin/sh -e \n");
        fputs($file, "sleep 30 \n");
        fputs($file, "cd /var/www \n");
        fputs($file, "./run.sh \n");
        fputs($file, "exit 0 \n");
        fclose($file);
}
else{
	$cg_option_starttype_webstart = 'selected = \"selected\"';
	$cg_option_starttype_autostart = '';

	$file = fopen("/etc/rc.local","w");
        fputs($file, "#!/bin/sh -e \n");
        fputs($file, "exit 0 \n");
        fclose($file);
}

?>

<!DOCTYPE html>
<html>
<head>
	<meta http-equiv="Content-type" content="text/html; charset=utf-8" />
	<title>A2 - OC tweak version 1.0 by Emdje</title>

	<style type="text/css">
		div#header {font-size:18px; text-align:center}
		div#author {font-size:16px; text-align:center}
		div#ip     {font-size:16px; text-align:left}
		div#pool   {font-size:16px; text-align:left}
		div#hash   {font-size:16px; text-align:left}
		div#status {font-size:16px; text-align:left}
		div#log    {font-size:16px; text-align:left}
		div#footer {font-size:14px; text-align:center}
	</style>

	<script language="javascript">
	function showhashspeed()
	{
		var speed1=parseInt(document.getElementById("speed1").value);
		var speed2=parseInt(document.getElementById("speed2").value);
		var speed3=parseInt(document.getElementById("speed3").value);
		var speed4=parseInt(document.getElementById("speed4").value);
		var speed5=parseInt(document.getElementById("speed5").value);
		var speed6=parseInt(document.getElementById("speed6").value);
		var speed=speed1+speed2+speed3+speed4+speed5+speed6;
		document.getElementById("hashspeed").innerHTML="A2 TERMINATOR SPEED: "+(speed*12.4/1000)+"M/s";
	}
	</script>
</head>

<body onload="showhashspeed()">

<div id="header">
	<h1>A2 OC version 1.0 by Emdje</h1>
</div>

<div id="author">
	<p>INNOSILICON A2</p>
</div>

<div id="ip">
	<form action="" method="post">
		IP ADDRESS:   <input style="color:blue" type="text" name="ip"      size="11" value=<?php echo $ip ?> />
		NETMASK: <input style="color:blue" type="text" name="netmask" size="11" value=<?php echo $netmask ?> />
		GATEWAY:   <input style="color:blue" type="text" name="gateway" size="11" value=<?php echo $gateway ?> />
		DNS:      <input style="color:blue" type="text" name="dns"     size="11" value=<?php echo $dns ?> />
		<input type="submit" value="<?php echo $ip_button_info?>" />
	</form>
</div>

<div id="pool">
	<form action="" method="post">
		GROUP 1 POOL 1 ADDR: <input style="color:blue" type="text" name="pool1" size="35" value=<?php echo $pool1 ?> />
		POOL 1 ID: <input style="color:blue" type="text" name="id1" size="10" value=<?php echo $id1 ?> />
		POOL 1 PWD: <input style="color:blue" type="text" name="pwd1" size="10" value=<?php echo $pwd1 ?> /> <br \>
		GROUP 1 POOL 2 ADDR: <input style="color:blue" type="text" name="pool2" size="35" value=<?php echo $pool2 ?> />
		POOL 2 ID: <input style="color:blue" type="text" name="id2" size="10" value=<?php echo $id2 ?> />
		POOL 2 PWD: <input style="color:blue" type="text" name="pwd2" size="10" value=<?php echo $pwd2 ?> /> <br \>
		GROUP 1 POOL 3 ADDR: <input style="color:blue" type="text" name="pool3" size="35" value=<?php echo $pool3 ?> />
		POOL 3 ID: <input style="color:blue" type="text" name="id3" size="10" value=<?php echo $id3 ?> />
		POOL 3 PWD: <input style="color:blue" type="text" name="pwd3" size="10" value=<?php echo $pwd3 ?> /> <br \>
		GROUP 2 POOL 1 ADDR: <input style="color:blue" type="text" name="pool1_2" size="35" value=<?php echo $pool1_2 ?> />
		POOL 1 ID: <input style="color:blue" type="text" name="id1_2" size="10" value=<?php echo $id1_2 ?> />
		POOL 1 PWD: <input style="color:blue" type="text" name="pwd1_2" size="10" value=<?php echo $pwd1_2 ?> /> <br \>
		GROUP 2 POOL 2 ADDR: <input style="color:blue" type="text" name="pool2_2" size="35" value=<?php echo $pool2_2 ?> />
		POOL 2 ID: <input style="color:blue" type="text" name="id2_2" size="10" value=<?php echo $id2_2 ?> />
		POOL 2 PWD: <input style="color:blue" type="text" name="pwd2_2" size="10" value=<?php echo $pwd2_2 ?> /> <br \>
		GROUP 2 POOL 3 ADDR: <input style="color:blue" type="text" name="pool3_2" size="35" value=<?php echo $pool3_2 ?> />
		POOL 3 ID: <input style="color:blue" type="text" name="id3_2" size="10" value=<?php echo $id3_2 ?> />
		POOL 3 PWD: <input style="color:blue" type="text" name="pwd3_2" size="10" value=<?php echo $pwd3_2 ?> /> <br \>

		GROUP 1 POOL SELECT:<input type="radio" name="group" value="1" <?php echo $cg_radio_group1 ?> />
                GROUP 2 POOL SELECT:<input type="radio" name="group" value="2" <?php echo $cg_radio_group2 ?> /> <br \>

		BOARD 1 SPEED: <select name="speed1" id="speed1" onchange="showhashspeed()">
			  	<option value="1330" <?php echo $cg_option_speed1_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed1_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed1_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed1_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed1_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed1_1280 ?> >15.87M(1280Mhz)</option> 
			  </select>
		BOARD 2 SPEED: <select name="speed2" id="speed2" onchange="showhashspeed()">
                		<option value="1330" <?php echo $cg_option_speed2_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed2_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed2_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed2_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed2_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed2_1280 ?> >15.87M(1280Mhz)</option>
                </select>
		BOARD 3 SPEED: <select name="speed3" id="speed3" onchange="showhashspeed()">
                		<option value="1330" <?php echo $cg_option_speed3_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed3_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed3_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed3_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed3_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed3_1280 ?> >15.87M(1280Mhz)</option>
                </select> <br />
		BOARD 4 SPEED: <select name="speed4" id="speed4" onchange="showhashspeed()">
                		<option value="1330" <?php echo $cg_option_speed4_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed4_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed4_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed4_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed4_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed4_1280 ?> >15.87M(1280Mhz)</option>
                </select>
		BOARD 5 SPEED: <select name="speed5" id="speed5" onchange="showhashspeed()">
				<option value="1330" <?php echo $cg_option_speed5_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed5_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed5_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed5_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed5_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed5_1280 ?> >15.87M(1280Mhz)</option>
                </select>
		BOARD 6 SPEED: <select name="speed6" id="speed6" onchange="showhashspeed()">
                		<option value="1330" <?php echo $cg_option_speed6_1330 ?> >16.49M(1330Mhz)</option>
				<option value="1320" <?php echo $cg_option_speed6_1320 ?> >16.37M(1320Mhz)</option>
				<option value="1310" <?php echo $cg_option_speed6_1310 ?> >16.24M(1310Mhz)</option>
				<option value="1300" <?php echo $cg_option_speed6_1300 ?> >16.12M(1300Mhz)</option>
				<option value="1290" <?php echo $cg_option_speed6_1290 ?> >15.99M(1290Mhz)</option>
				<option value="1280" <?php echo $cg_option_speed6_1280 ?> >15.87M(1280Mhz)</option>
                         </select> <br \>
		DEVICE INITIAL DIFF: <select name="diff">
			  	<option value="12" <?php echo $cg_option_diff_2048 ?> >2048</option>
				<option value="11" <?php echo $cg_option_diff_1024 ?> >1024</option> 
			  	<option value="10" <?php echo $cg_option_diff_512  ?> > 512</option> 
			  	<option value="9"  <?php echo $cg_option_diff_256  ?> > 256</option> 
			  	<option value="8"  <?php echo $cg_option_diff_128  ?> > 128</option> 
			  	<option value="7"  <?php echo $cg_option_diff_64   ?> >  64</option> 
			  	<option value="6"  <?php echo $cg_option_diff_32   ?> >  32</option> 
			  	<option value="5"  <?php echo $cg_option_diff_16   ?> >  16</option> 
			  </select> (AUTO UP TO 4096) <br \>
		START TYPE: <select name="starttype">
                                <option value="0" <?php echo $cg_option_starttype_webstart ?>  >WEBSITE MANUAL START</option>
                                <option value="1" <?php echo $cg_option_starttype_autostart ?> >POWERON AUTO START</option>
                          </select> <br \>
		CGMINER START:	  <input type="radio" name="control" value="start" <?php echo $cg_radio_start?> />
		CGMINER STOP:	  <input type="radio" name="control" value="stop"  <?php echo $cg_radio_stop?> />
			  <input type="submit" value="<?php echo $cg_button_info?>" />
	</form>
</div>


<div id="hash">
	<p id="hashspeed" style="color:blue"></p>
</div>

<div id="status">
	<form action="./miner.php" target="_blank" method="post">
		STATUS:<font color=<?php echo $cg_status_color?>> <?php echo $cg_status_info?> </font> <input type="submit" value="REALTIME STATUS MONITOR" />
	</form>
</div>

<div id="log">
	<br \>
	<form action="" method="post">
		HASHMETER:<input type="submit" value="REFRESH" />
	</form>
	<?php echo $cg_log?>
</div>



<div id="footer">OC tweak version 1.0 by Emdje</div> 
<div id="footer">Donate btc: 1FiHCFcP4ovbV89nGhYEMWXSZsWnGUASSe</div>

</body>
</html>

1>------ Build started: Project: sgminer, Configuration: Debug Win32 ------
1>  Could Not Find C:\Users\Maarten\Desktop\SGMiner inc. X15\winbuild\output\x86\Debug\*.exe
1>  Could Not Find C:\Users\Maarten\Desktop\SGMiner inc. X15\winbuild\output\x86\Debug\*.dll
1>  'git' is not recognized as an internal or external command,
1>  operable program or batch file.
1>  util.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  whirlpool.c
1>  twecoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  skein.c
1>  simd.c
1>  shavite.c
1>  shabal.c
1>  sha2big.c
1>  sha2.c
1>  panama.c
1>  luffa.c
1>  keccak.c
1>c:\users\maarten\desktop\sgminer inc. x15\sph\keccak.c(1593): warning C4244: '=' : conversion from 'sph_u64' to 'sph_u32', possible loss of data
.
. alot more of these lines all the same
.
1>c:\users\maarten\desktop\sgminer inc. x15\sph\keccak.c(1593): warning C4244: '=' : conversion from 'sph_u64' to 'sph_u32', possible loss of data
1>  jh.c
1>  hamsi_helper.c
1>  hamsi.c
1>  groestl.c
1>  fugue.c
1>  echo.c
1>  cubehash.c
1>  bmw.c
1>  Generating Code...
1>  Compiling...
1>  blake.c
1>  aes_helper.c
1>  sifcoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  sgminer.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\curses.h(153): warning C4005: 'MOUSE_MOVED' : macro redefinition
1>          c:\program files (x86)\microsoft sdks\windows\v7.0a\include\wincon.h(101) : see previous definition of 'MOUSE_MOVED'
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  scrypt.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  qubitcoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  quarkcoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  pool.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  patch_kernel.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>  build_kernel.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  binary_kernel.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  ocl.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  myriadcoin-groestl.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  maxcoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  marucoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  logging.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  inkcoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  hexdump.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  groestlcoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  fuguecoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  Generating Code...
1>  Compiling...
1>  findnonce.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  driver-opencl.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\curses.h(153): warning C4005: 'MOUSE_MOVED' : macro redefinition
1>          c:\program files (x86)\microsoft sdks\windows\v7.0a\include\wincon.h(101) : see previous definition of 'MOUSE_MOVED'
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  config_parser.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  darkcoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  value.c
1>  utf.c
1>  strconv.c
1>  strbuffer.c
1>  pack_unpack.c
1>  memory.c
1>  load.c
1>  hashtable.c
1>  error.c
1>  dump.c
1>  usage.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>  parse.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>  opt.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>  helpers.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\ccan\opt\helpers.c(78): warning C4244: '=' : conversion from 'double' to 'float', possible loss of data
1>  api.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  talkcoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  Generating Code...
1>  Compiling...
1>  bitblock.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  animecoin.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  algorithm.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  adl.c
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\winbuild.h(115): warning C4244: 'return' : conversion from 'double' to '__int64', possible loss of data
1>c:\users\maarten\desktop\sgminer inc. x15\winbuild\dist\include\curses.h(153): warning C4005: 'MOUSE_MOVED' : macro redefinition
1>          c:\program files (x86)\microsoft sdks\windows\v7.0a\include\wincon.h(101) : see previous definition of 'MOUSE_MOVED'
1>c:\users\maarten\desktop\sgminer inc. x15\miner.h(124): fatal error C1083: Cannot open include file: 'ADL_SDK/adl_sdk.h': No such file or directory
1>  Generating Code...
========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ==========