I still mine BUN, and run just enough hashrate to keep the blockchain moving. As long as Bunnycoin is still listed on an exchange, I will keep mining.
BUN was a lot of fun and I see no reason to let it die just yet.
just wondering which exchange has BUNN? I'd like to grab a small amount just to have
|
|
|
what's up with yobit? dev could you contact them to sync the wallet? this is nuts! 2 days for a deposit
i did, a couple days before the fork, and during, and after. there's only so much i can do. they are not reliable. DO NOT SEND/WITHDRAW FROM YOBIT.Are my coins lost? i send yobit coins I think when it comes to Yobit, jumping on the chatbox and asking for Blacksmith or admin will get a result. Tickets never seem to be answered. not so sure about that.. at least in my personal experience. Ive got a missing BTC withdrawl from a couple months ago at yobit... no answer in chat, support or the thread here. However in this particular instance your XVG should eventually show up when yobit updates...
|
|
|
Im hoping either like 'DANK' or similar to a Insane Clown Posse 'Spazmatic'
|
|
|
OMG OMG! potcoin energy drink! hell ya! I gotta grab a case!
|
|
|
Coinomi android wallet seems to be up and rocking with the new wallet (they were down for two days but smooth now) although the wallet title in the app is still 'DogeD' lol
|
|
|
any word on the ios update? no notification from testflight yet.
|
|
|
COINOFLITECD now available for 150 BCY, if interested, send me a PM Got mine Thank you very much.
|
|
|
Please make this work... lol I have a shed of S1's that I'm too lazy to upgrade the blades.
Well, the current project is for the s3/s3+, however if its successful, I'll be dusting off the s1 and giving it a go aswell
|
|
|
L8nit3's Eyes On Miner - Beta 5Hello again BCT members I recently decided to pick up learning python again, and started on a small, spare-time project. It basically began as a way to test what I was learning (at home, self-teaching). It's a small front-end for a (currently) small number of asics. It runs in windows and linux for sure, however currently it must be run within the local network. Remote access is an eventual goal, however isn't at the top of the list for improvements. Should you choose to copy-and-paste the src and just run yourself, then this script runs on python 2.7 and requires PyCgminer and EasyGui to run, and is compiled with PyInstaller. Or you can use the pre-compiled windows exe below. sudo python pip install pycgminer sudo python pip install easygui CURRENTLY SUPPORTED ASICS-Gridseed Globe -Antminer s1-s7 -Hopefully more soon LINKSexecutable link = https://mega.nz/#!bt4mFQCQ!GH1GZjZRmUqIjWLfx2katLXILm3HsG_LRGRFInpAoDssource code paste = http://pastebin.com/ms8HPTJWIMAGESDISCLAIMER:This script relies on Thomas Sileo's PyCgminer module, credits for this module go to him alone. Let me know what you guys think Also, if you have a device you would like added, please send a 'cgminer summary' using the pycgminer module (or any other method) to l8nit3@outlook.com, and I'll add it as quickly as I can. CGSummary copy-and-paste code available at: http://pastebin.com/X6jXVLYR
|
|
|
Its about a dog that was treated badly, posted originally by an animal shelter
|
|
|
Does this shit exchange ever answer to any support ticket?Support Date Topic Status View 2016-03-08 17:18 VTC Coins? New View 2016-02-25 17:43 maintenance? New View I have had issues with them before. The always answer my ticket within a few hours. very fast. much faster then some of the other sites. I had to wait 2 days last week for poloniex to get to one of my tickets. but that could be because of all the action they were seeing with eth. ok... So what did you do to get your ticket answered? As you can see, mine are three and four weeks old now. No reaction whatsoever. I have also been waiting a similar amount of time on a support ticket concerning a missing withdrawl. I am simply assuming my BTC is lost, and that my ticket will not be addressed. Sad because yobit was my favorite exchange up untill now, this is the first issue Ive ever had with them.
|
|
|
waiting eagerly. All of us. Dev, do you have any update? Price is going down and only here it is stable. Otherwise there was no stability found in past days
That may be true, but, instability is a great time for scalp trading which helps to build a nice WARP bag for the release of an update when everyone scrambles to buy back in
|
|
|
Wow, taking a look at the leaderboard, we have some serious gamers in our midst! I barely have time to break 1000 waves and we have some >7k!
|
|
|
Do you have Winzip?
If you need to extract the contents of a complex archive, such as a tar.gz or tgz file (each being an archive with a tar file inside), you would need two commands:
unzip file.tar.gz to your custom [folder] then put them in the new ultra iso custom as you see. unzip file.tar to your custom [folder] then put them in the new ultra iso custom as seen
These things used to annoy me in the past, still do now.
You just have to try, and try anything.
will do I think my first step is going to be getting a look at the newer firmwares, such as s5 or s7, to get a feel for the file tree setup. Then switching over to linux for a better attempt at the s3 .bin file.
|
|
|
LMFAO, just logged into my old account, and somehow I have 2 Mhash.... after cashing out a ways back.... 'everytime I make it out, they pull me back in' lmao jk
|
|
|
You can try using all the files instead, put them in a new custom folder in ultra iso (new project) and try that way, maybe it will work. I had problems like this myself long time ago, not sure if it worked now.
I shall have a nose around, see what I can come up with.
Well, either way Im not ready to give up yet I'm in the process of familiarizing myself with the different types of bin file, how they are created, and how they are extracted. Thank you for the help. I'd love to have a self-customized front-end on my s3+ running solo right now. And, who knows, if it works out, maybe I'll link a copy for any brave s3/s3+ owners willing to give it a go lol. (after a proper testing period of course) However at this point, these are all just big dreams lol Magiciso... lol Your computer skills lack for what you wish to achieve. Hint: wait some time maybe there will be new firmware for ants family later
I have tried other software aswell, and as soon as some of my projects are done running on my winblows partition, I'll be switching over to my linux for a real go at it. I think it's a tad over-reaching to tie my 'computer skills' to a single piece of software I mentioned. I have accomplished some neat projects in my short time (~ 5 years) learning all areas of tech. I run my own custom android kernel (5.1 kali nethunter) with some neat additions such as overclocking, multiple filesystem support, and OTG support, all from a vanilla kernel source. ( a feat I accomplished as my FIRST android project) This is my first attempt with .bin files, and as such, the learning curve is likely to be steep, which Im prepared for.
|
|
|
Just got a real cheap s3+ to play the 'lottery' Also just looked at the 'pools' total hashrate, and checked blocktrail for the last block found..... its been a bit for solo.ckpool. Which, made me think nows a great time to jump on with all I got so I rented a buncha rigs..... here's to hoping!
|
|
|
Ok, so Ive hit a bit of a roadbump with this project. (I know, on step 1 lol) The binary files provided by bitmain, at least for s1 and s3, are NOT cd files that have been converted into a .bin (such as for emulators). Due to this, magicISO, daemon tools, and UltraISO all give an error when attempting to convert to ISO filetype. All with different wording, but similar to 'Cannnot locate file or file is not cd image file'.
Now after some quick research I've come to realize that firmware for s4 and up actually come in .tar.gz format, making extraction and modification FAR easier. With this new info, I've come to the conclusion that without some serious hex and debugging knowledge, that this project may be dead before it starts.
Does anyone have any ideas on how to turn a non cd-rom .bin into ISO (since its not mountable)? or is hex-editing the only option at this point?
|
|
|
You have to convert the bin to ISO then burn it to dvd/cd, if you don't want to do that you can create a virtual disc drive for the purpose of seeing the files and running the exe inside.
Been a long time since i did this, cannot remember all the fine details.
Hope it helps somehow.
SWEET! this is exactly what I was looking for Thanks so much for the info. Now time to journey 'down the rabbit hole' lol see you all in 2 weeks lmao
|
|
|
|