This is a snapshot of my 8 x 1080 Rig. I'm concerned it is switching too much. Anyone figure out how to get the profits to still update frequently but only switch if the most profitable has been there for say 90 seconds? this would prevent a lot of blips. Looks to have changed 115 times since I started about 12 hours ago. That is about 6 min average, but i'm sure 75% of those were running less than 2 minutes. Let's say it takes about 8 seconds to switch and get to full speed. In 12 hours I spent 15 minutes offline due to switching. This is about a 2% impact. Any thoughts?  |
|
|
|
I also added the following code to the beginning of the start.bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
I thought that these variables are only needed when using ethash miners. Are you seeing any difference when using them with ccminer/ewbf? Impressive mastery of NvidiaInspector, BTW. How come you use it instead of AB? I use NvidiaInspector because I feel it is faster when loading values. The command lines are cleaner I feel. I also think it "wakes" the cards up when these get pushed. Using this method I have a lot less issues of Alexis not loading all cards when started. The var sets I include everywhere just from habit. I have had issues when not included. |
|
|
|
Block processing script was hung. Restarted and will take a bit to sync 4 hours worth of blocks.
Looks like it might be hung up again... I hope so, I'm missing about .01 in my balance. No I can't see which blocks I was credited with and not. |
|
|
|
|
I think there is a problem. I just found a blocked I actually mined and didn't get paid for...
|
|
|
|
My miner cant connect to the server at the moment, too.
...retry after 30 seconds
...retry after 30 seconds
...retry after 30 seconds
etc
Nevermind, servers are back online.
I think there is still an issue. The last coin mined was 118 minutes ago. Miners look fine though |
|
|
|
|
A 8 x 1080 TI rig is cheaper.
|
|
|
|
I think its way $$.  |
|
|
|
I also added the following code to the beginning of the start.bat file SET CLOCK1=200
SET MEM1=500
SET POWTAR1=120
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
SET GPU0=-setBaseClockOffset:0,0,%CLOCK1% -setMemoryClockOffset:0,0,%MEM1% -setPowerTarget:0,%POWTAR1% -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,%CLOCK1% -setMemoryClockOffset:1,0,%MEM1% -setPowerTarget:1,%POWTAR1% -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,%CLOCK1% -setMemoryClockOffset:2,0,%MEM1% -setPowerTarget:2,%POWTAR1% -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,%CLOCK1% -setMemoryClockOffset:3,0,%MEM1% -setPowerTarget:3,%POWTAR1% -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,%CLOCK1% -setMemoryClockOffset:4,0,%MEM1% -setPowerTarget:4,%POWTAR1% -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,%CLOCK1% -setMemoryClockOffset:5,0,%MEM1% -setPowerTarget:5,%POWTAR1% -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,%CLOCK1% -setMemoryClockOffset:6,0,%MEM1% -setPowerTarget:6,%POWTAR1% -setTempTarget:6,0,83 -forcepstate:6,0
SET GPU7=-setBaseClockOffset:7,0,%CLOCK1% -setMemoryClockOffset:7,0,%MEM1% -setPowerTarget:7,%POWTAR1% -setTempTarget:7,0,83 -forcepstate:7,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6% %GPU7% |
|
|
|
|
None here.
I'd buy every 1080 / 1080 TI there was...
|
|
|
|
To add custom intensities open the miner ps1 file and after the algo there will be a "", input here but make sure to put a space first. " -i 22"
MAKE SURE TO PUT A SPACE FIRST! |
|
|
|
|
try increasing voltage. I have 22 of these cards and could not go down to 930. I think I'm at 950 for both and -12 for voltage offset.
|
|
|
|
I have changed it still same results.  also changed drivers on Crimson 16.9.2 Is my fan speed is also ok ? its 55 % all the time. You can put you fan on auto. I don't like to force a value because what if for some reason it needs to go higher. Try to dual mine with DCR Intensity at 27 (-dcri 27) setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool URL:PORT -ewal USERNAME -epsw x -allpools 1 -dpool stratum+tcp://URL:PORT -dwal USERNAME -dpsw x -dcoin dcr -dcri 27 -mport 3333 |
|
|
|
Your target temp is set to 52c. change it to 73c |
|
|
|
Awesome Miner version 3.2- Command line parameters can be configured per pool - Claymore specific pool settings added to the Pool Properties dialog - New rule trigger for mining process related failures - Profit switcher can be used with unique Bitcoin wallet address per miner - Display Windows uptime for remote miners - Minor updates to the Managed Profit Switching feature, including information in the View Details dialog - Added CcMiner Alexis 1.0 - Claymore Ethereum Miner 9.7 - Corrections Please make sure that you also upgrade the Remote Agent to the same version. I've added a guide on the web site about how the worker name concept works, and also how you can use the profit switcher with individual Bitcoin wallet addresses for payout per miner (when mining on Nicehash and Zpool for example): http://www.awesomeminer.com/help/workername.aspxFor the next release, I will focus on making improvements to the profit switcher and also bring in Ccminer 2.0 instead of the older Ccminer Sp-mod used today. Thanks for the continuing development. I'm not sure how important a profit switching program is when it still lacks the most profitable coins.... Until we add all algos from zpool I still can't use this program for it's intended use. please add all the algos. For the next release, I will do improvements to the profit switcher, and this will be one of the areas I will improve. To be honest I do not use any of the advanced functions. I'm currently just using it as a monitor. I'm very excited to start using this as a profit switch though. just keep in mind, a lot of us have custom miners and bat files which change clocks/ mem settings, intensity etc to maximize performance. Its almost I just want to select the algos I want to mine and link those to my already made bat file. very excited for future releases. |
|
|
|
Working on a C11 sp-mod if anyone interested.
Sweet! YES! |
|
|
|
Have you purchase a vga dummy chord for your hdmi slot? It allows you to run TeamViewer at a muhc better resolution without as much disruption.
I have dummy plugs on all my rigs. It actually appeared more like a teamviewer network issue. Side note, my hash rates have dropped slightly and I have seen bigger swings. |
|
|
|
Hello!
I have a PC with an Intel Xeon Processor X7330 8M Cache, 2.93 GHz, 1066 MHz FSB
What is its speed for mining Monero?
thanks in advance!
If you do test yourself, please use zpool.ca and add "stats" in the password. This will add to http://zpool.ca/bench . I did not see your CPU there. |
|
|
|
I'm also having an issue where Powershell will not display.  |
|
|
|
If you mean lowering the hash rate of one of your gpu's then yes.
That is the only thing i get whit it
no, connection issues. I've never noticed speed issues. What program do you use? |
|
|
|
|
Show Posts
, just wanted to ask is there anybody here that could help me with custom Bios for my Msi Rx 470 4GB [Hynix] card. What I have done so far is I have created a backup my original bios + copy. Copy I have edited (line from 1500 I have copied and paste 3 times till 2000) also used WattTool. Im mining ETC. Is it possible to get better. hash rate 
Is Win 10 good for mining , and what drivers from AMD are the best ? 
Thanks for any help 
