Why not just have a mining box with a small extra fan blowing -20 in and another blowing inside ambient box air out?
If possible have their speed controlled so that the box temperature is at a more suitable temperature.
So just stick your miner/s into the box and regulate the temperature of the box by controlling the amount of air coming in and out of that box.
Of course be careful that your box temperature does not fluctuate up and down much. Fast temperature changes to electrical devices is death.
The idea is something like this. But the fans of the machines are to strong to keep it sealed. So exhaust will be completly open and intake aswell whit a fan pulling cold air inside from the bottom. Fans form machines will be pushing out. My IT techer even told me that why not put the machines inside Oil cooling and cool down the oil whit the winter cold. Might even be a clever solution, oil will protect from outside and will be more seleaded swell. |
|
|
|
Another little update: After a few days of sitting at 19M I just checked and had another little grin. Besthash: 1,205,870,795
Not exactly a block, but it was a nice share just the same. I'm proud of my little Sparky!
damn you getting close, i had like half billion as best share, not even in the billion game yet.. Toguth i started to mine normally now will continue after i roi the new machines  |
|
|
|
|
Just ordered some new Thermal GReese, AS5 just dries to quick on the sp20, will repaste all the machines and get the chips on alot of compound to protect from the winter chills.
Also ordered a fan controller will have the fans run 100% whit no machine control.
As what i understand from Overclocking under freezing temperatures the cores need to warm up a little bit before running full pontetiall.
Also checking some absorbemt materials to cover under the intake just incase to abosorbe moisture.
A s3 won't be relevant for overclocking but will might give it a try aswell to see maybe can squish 700ghz out of it.
|
|
|
|
|
Yeha ill be prepareing. ,my electric bill is 0.05 cents kwh so might overclocking my machines if it goes well else ioll be having them inside the house.
The climate is still warm . at -5 at nights and rainy on days. might have to wait a month untill it gets colder.
The climate is dry so it wouldnt conduct much moisture, more than normal, even less.
The main obstacle will be to have the protection totally sealed.
|
|
|
|
|
Yeah i will try anyways.
I am hoping to overclock my sp20 and want to see the possibiliets if i can get 3thz from it running in cold weather.
|
|
|
|
|
I am Auctioning 1x Scam idea Apropiated to your moral.
We start - 10btc .
Ending time
2015-10-2
|
|
|
|
As long as you don't get wet on your machines it sounds like a good idea. -20 would be too much, dunno if any electronic devicewould work at that temperature.
I think the hardest part is letting air in and out. This is needed to run miners an intake and exhaust of air. OP is talking about a roof and 2 sides I believe this leaves 2 sides open to the elements. The miners chances are will heat up. And when they do you will be running with water/ice inside i think. You cannot make air tight so it leaves it to elements of outdoors. I still highly suggest moving inside with miners and send exhaust outside. Water can do a lot of damage. There won't be any kind of elements getting inside, discard this, as there will be a roof over the "box" whit roof. The Air is dry so to carry mositure it wont be that easy. Is it snow or ice by miner? I'm guessing ice with temp but snow still could fall I'm guessing. I just think if air is able to get in possibly some bad elements could to. If snow or ice is pushing against intake when it snows and it melts seems possible for it to come inside of the box. I just have not seen anyone done this at these temps before. And I could be wrong, just don't see to many miners outside, and specifically at this temp. Yeah but it wont come anything from the underside it will be sealed aswell, hot air goes up, and cold air will go down.. Intake will always be fresh air. If cpus can hold nitrogen why would -20 c affect the chips ? |
|
|
|
As long as you don't get wet on your machines it sounds like a good idea. -20 would be too much, dunno if any electronic devicewould work at that temperature.
I think the hardest part is letting air in and out. This is needed to run miners an intake and exhaust of air. OP is talking about a roof and 2 sides I believe this leaves 2 sides open to the elements. The miners chances are will heat up. And when they do you will be running with water/ice inside i think. You cannot make air tight so it leaves it to elements of outdoors. I still highly suggest moving inside with miners and send exhaust outside. Water can do a lot of damage. There won't be any kind of elements getting inside, discard this, as there will be a roof over the "box" whit roof. The Air is dry so to carry mositure it wont be that easy. |
|
|
|
|
Because you talk like a scammer.
You Lie like a scammer.
you are a scammer.
|
|
|
|
|
i would buy for 10us to try out.
|
|
|
|
Am I allowed to change password of account?
You can't change the password because the way this service works is they steal peoples PS4 account info that has digital copy of games. As long as you don't change the password and you have the account linked on your ps4 you can always play it. Note: If the owner removes all device in option you wont be able to play your game. 1. That isn't true. 2. I've told you to PM me if you want a replacement game, since you "misplaced" the one I gave you. 3. These are brand new accounts. I've had over 5 people use the "BitTalk10" coupon, and you're the only one to complain so far. -shooky So i am waiting for my replacement acccount. You say that i can't change the password but earlier you sayd that i changed password from my account you sended me ; wich i still am waiting for. So you are 100% scam. Check what you say, unless you send me that account you say to make all new you will be flagged as a scammer. |
|
|
|
As long as the miner stays on so it generates heat, does not get wet, has air circulation and stays clean I would think it will do fine.
I might be concerned about the wiring getting to brittle if it gets really cold.
yeah i am building a box to put them inside, whit the exhaust out of the windows . It kinda will have two sides and intake will facing inside the buildingn whit the extra roof. |
|
|
|
What types of damage could the machine takes if they are placed outside in the scandinavian winter. whit roof . no walls ? any overclock pocibilities? Let's say s5 machines sp20s ? this is the idea. The Blow will be outside and the intake will be pulled from downside. PLacing the Miners on the balconi the intake should not bring any moisture from the downside. Weather is pretty dry were i live. The little box will be weather prooff so no water or snow will be getting inside.  |
|
|
|
|
Well then ill have to upload the proof of our conversations.
|
|
|
|
|
nope, no game, no account, stop lying.
|
|
|
|
Hello, We have received all required funds for your payment of 0.04652920 BTC to PayIvy and your payment is now Complete. The transaction ID of this payment is: e9f2c23bb5db5fb827cd9c6686db6e33e5118b663f1391983eed43cf71855ff4 Thank you for using CoinPayments.net! Support is available at: https://coinpay.freshdesk.com' this is my payment and he have not delivered anything. In PM he told me i had not payed, he said he was going to send t he game, he have not done anything yet. you all are warned. |
|
|
|
|
This is a scam.
he do not deliver any games.
|
|
|
|
|
{"hashrate1m": "364G", "hashrate5m": "316G", "hashrate1hr": "312G", "hashrate1d": "296G", "hashrate7d": "264G", "lastupdate": 1442710892, "workers": 1, "bestshare": 573857913.48008144}
undervolted udnerclocked s3 2days
|
|
|
|
|
i am still waiting for my game.
|
|
|
|
|
Show Posts
