is it possible to use Claymore Etc and ETH mining software on your pool ?
my baikal mini miner works well with your pool but i couldnt set up the claymore software for ETC ETH
Yes: EthDcrMiner64 -epool hub.miningpoolhub.com:17020 -ewal user.worker -epsw x -esm 3 -allpools 1 |
|
|
|
@aaronsace, thank for your work  i have make many change for your scrypt work for me : 1 - $Interval = 300 #seconds because ethdcrminer take a lot of time for starting on my rig. 2 - on pool/miningpoolhub.ps1 https://miningpoolhub.com/index.php?page=api&action=getautoswitchingandprofitsstatisticsreturn a bad server (us server or i want use eu server). my workaround : Host = 'hub.miningpoolhub.com' # $_.host hardcode host with this. 3 - your sgminer don't work fine for me. skein don't work and many over kernel make crash my rig. for begin, i must write at the end of Arguments -I 25, with the default -I 8 sgminer don't work. after, i use sgminer-mph who work better for me. so i must change : $Path = '.\Bin\AMD\sgminer.exe' for the path to mph sgminer. 4 - for claymore, i must write on the end of Arguments : -dbg -1 -tt 75 -tstop 85 -fanmin 30 -fanmax 95 for have the same thing of i use now. 1. Will move interval from a hard coded variable into a an optional parameter. 2. Will add error checking on the api and use the previous results if failed. 3. Sgminer shouldn't crash your rig, it may be highlighting a problem with your setup. May add other optional miner versions for situations like that. 4. I recommend using an outside application (i.e. AMD Crimson which has been coming on leaps and bounds) instead of claymore as it switches between miners. Otherwise, editing the miner commands is the best route for now. May add some master options at some point. |
|
|
|
Hallo aaronsace, thanks so much for this christmas present!! But i get crazy: First i bought the book: "Powershell for Dummies" --- now, after little bit looking in it  , i am searching the web for the book {Powershell for Dummies} for Dummies!  i have three test rigs : clones from fresh install win 10, only cards are different, amd R9 270x, R9 280x, and R9 290x So all the same, start multipoolminer on each, ---on each completly different behaviour and now i even cannot form a question -must try more but one question do i have: where to change "us" to "europe" server? dont find in script! ( issues: first rig: only claymore ethash starts, no benchmarking -thats all!? second rig: ccminer tries to start: say some file from it is missing --copied a new version there, all same, even i dont need him -sgminer starts benchmarking one coin - finish!? third rig: benchmarking only some coins with sgminer, thats all Also what i dont understand: also for V1.3 where i had to put in hash/s for my own - miningpoolhub shows for example skein first- with 50% more than equihash, in your script skein nearly zero profit or even zero profit is shown and so sgminer dont start, same for nearl all other coins from sgminer. sorry i really dont understand this all, dont know where to start to solve these issues, i am not so stupid and my little farm quite working well without issues and also i think your script is a must have and was quite a lot - lot of work!!) Will add a location preference in the next increment. Please send the log files from you rigs; I maybe able to see what's going on. Post bugs and suggestions here if you can: https://github.com/aaronsace/MultiPoolMiner/issues |
|
|
|
Type: {AMD, NVIDIA}
Miner Algorithm GH/s BTC/Day BTC/GH/Day Pool
----- --------- ---- ------- ---------- ----
ClaymoreDual30 {Ethash, Sia} {0,031637, 0,431630} {0,002684, 0,000116} {0,084838, 0,000269} {MiningPoolHub, MiningPo...
ClaymoreDual40 {Ethash, Sia} {0,031126, 0,565936} {0,002641, 0,000152} {0,084838, 0,000269} {MiningPoolHub, MiningPo...
ClaymoreDual20 {Ethash, Sia} {0,031857, 0,289617} {0,002703, 0,000078} {0,084838, 0,000269} {MiningPoolHub, MiningPo...
Claymore Ethash 0,031723 0,002691 0,084838 MiningPoolHub
Type: AMD
Miner Algorithm GH/s BTC/Day BTC/GH/Day Pool
----- --------- ---- ------- ---------- ----
Claymore Equihash 0,000047 0,233759 5008,621430 MiningPoolHub
Sgminer Myriad_Groestl 0,000343 0,000005 0,014995 MiningPoolHub
Sgminer Lyra2RE2 0,000140 0,000005 0,036792 MiningPoolHub
Sgminer Groestl 0,000267 0,000005 0,017909 MiningPoolHub
the statistics is incorrectly displayed Claymore Equihash,
Not sure why but your computer is showing a comma (,) instead of a full stop (.). It may be a language problem, are you English? Will look into the problem. Please can you send me the Claymore text files in the stats folders? Also, what should the total hash rate be for your machine? Maybe it's parsing it incorrectly from Claymore if it has a comma instead of a full stop. Post issues here if you can: https://github.com/aaronsace/MultiPoolMiner/issuesEdit: Identified the decimal problem, I believe it's just a formatting issue on some displays; will be fixed in the next increment. |
|
|
|
New release of MultiPoolMiner! Have a great Christmas! https://github.com/aaronsace/MultiPoolMiner/releasesSupports benchmarking and multi-chip support (AMD and NVIDIA). There are currently no CPU miner pre-sets but will be added in the next increment. Just run the script and enter your pool user name once prompted; that’s it. Advanced users can add more miners in the ‘miners’ folder either as JSON or PS1. Please submit bugs and feature requests in the 'issues' section. Logs are produced in text format; use them when submitting issues. Bitcoin Donations: 1MsrCoAt8qM53HUMsUxvy9gMj3QVbHLazH |
|
|
|
Hi aaronsace, on one little test rig i was still (trying) running your script. again after time issue: two instances of claymore ------and of course sys freezing i think i saw something in the logs: in this test rig i have restart option claymore equihash miner 120min. after 5,6 times correct restarting - timer of claymore restart option starts first time and your script some seconds after this restart starts miner second instance! this is what i sometimes also recognised while testing in front of monitor maybe helps nice see your new master Don't set the miner to restart as that is probably creating a new process. If you want, you can set the miner to close then multipoolminer will detect this fine. Try version 2 if you're still having issues. |
|
|
|
|
1. Not sure why it's failing to close the previous miner (never failed for me); will add more checks to see if it's closed.
2. I use the 17xxx to reduce the amount of local switching.
3. No hub configuration is required.
4. I'll add it in ready.
5. PPLNS is confusing but I don't believe switching occasionally effects it.
6. I'll add CPU support as well as NVidia (same underlying problem).
I've got a day off tomorrow so be sure to check version 2 when it's released.
|
|
|
|
aaron you said you would release v2 in a couple of days......about 4 days ago. Any update on ETA?
Sorry, I couldn't work on it for a while. It was close to ready; I'll look at uploading tonight. Edit: It's not working quite right. I have tomorrow free so I'll sort it then. I want to add NVidia support as well before I upload. |
|
|
|
Sorry it was misconfigured after web server movement.
I extended session duration.
I prefer web browser to remember my id/password recently, and didn't notice this problem until now.
Adding "Remember me" checkbox would save user email temporarily. Is it enough for you?
It's working! That's so much easier; closed the web browser then opened it again and I'm still logged in. |
|
|
|
Hi MPH guys
can you please prevent that i had to enter my user and password every single time? before the upgrade, i can remain logged in for about 6 hours, and then i had to login, that's ok, but now it's like 10 minutes, i have to put my password every single time to see the stats, it's really annoying.
thanks
indtk.
+1 on that, a 'keep me signed in' option like on other sites would be better. I think Monero is taken most of the time at the moment though; eagerly awaiting. |
|
|
|
Hallo,
can somboday explain, how to use multipoolminer?! I am always mining with claymore and last time on miningpool hub. Like very much this pool and all you can make here - but no idea how to start multipoolminer. in powershell? --always say cannot find internetexplorer?? I dont know to make programms -but my miners work.
So please, somebody could give me an useful unstruction
Not sure how you have internet explorer involved in it.  I'll be releasing version 2 in a couple of days that should be easier to use. On the current version: Right click and edit the file. Enter your miner locations, username and hash rates (hash per second). Save the changes. Right click and run the file. If you leave the hashrate as zero then it won't mine that algorithm. he's right.yesterday i reinstall windows 10 and with first start of scrypt - same error.i just opened IE once and then scrypt begin to work. I've never seen this error but I believe powershell uses internet explorer services to parse the web. If it is a fresh install of windows or have never launched internet explorer then I think it causes this error. There is a work around, I'll apply the fix in the next release. Thanks. |
|
|
|
Hallo again, i think i really need an "easier to use" version. I saw where to write all in -- not all: where to write hashrate? which wallet - we are on miningpoolhub, only our loginnames ....and so on Maybe you could write a " how to use text" where exactly to fill in all ´(different miners are config., all work when i start, and i think you program is that i was looking for the last month-you did it!) Glad to here it worked. New version should be as simple as click and run. Should have done a readme, live and learn. So I've now added those instructions on the download page to alleviate the initial confusion at least. |
|
|
|
Hallo,
can somboday explain, how to use multipoolminer?! I am always mining with claymore and last time on miningpool hub. Like very much this pool and all you can make here - but no idea how to start multipoolminer. in powershell? --always say cannot find internetexplorer?? I dont know to make programms -but my miners work.
So please, somebody could give me an useful unstruction
Not sure how you have internet explorer involved in it. I'll be releasing version 2 in a couple of days that should be easier to use. On the current version: Right click and edit the file. Enter your miner locations, username and hash rates (hash per second). Save the changes. Right click and run the file. If you leave the hashrate as zero then it won't mine that algorithm. |
|
|
|
hi, mind to share how does the auto exchange works ?
let's say that i'm mining eth/etc autoswitch & i had set auto exchange to bitcoin.
I've just set it to auto exchange to BTC & filled up the BTC pool with my BTC addy.
Hope i got it right.
so those etc/eth mined at MPH will be automatically exchanged to BTC at prevailing prices (based on which exchange) & the auto exchanged etc//eth to BTC will show up in MPH's Bitcoin Pool wallet ?
I think I'm on the right page but not 100% sure how it works.
much thx in advance OP/pool op.
That's correct and is the best setup. Don't leave loads of coins in pool wallets; set your auto payout to 0.01 BTC. |
|
|
|
how do i make the dashboard update? faster  It's a set speed: "Refresh interval: 10 seconds. Hashrate based on shares submitted in the past 5 minutes." Your miner will give you real-time speed. |
|
|
|
 nice to see I made something useful. I'll be adding benchmarking this week and make it easier to use. I fixed the errors on the current version that lyolyalya reported on github. Please use bitcoin address 1Q24z7gHPDbedkaWDTFqhMF8g7iHMehsCb for multipoolminer donations.
|
|
|
|
Sometimes the profit for 'Digitalcoin-X11' reports really high on the pool but never gets anywhere near what it reports (seems like less than a tenth of what it's reporting). Are you sure it is ever that high and it's not just a mistake sometimes or a very momentary spike?
I think it's the most fluctuating coin on there...
Check digitalcoin's blocks page. https://digitalcoin-x11.miningpoolhub.com/index.php?page=statistics&action=blocksThis coin's difficulty rise up like rocket and crash to near 0 often. When this coin's difficulty gets lower, profitability increases at that point. It doesn't last long, but it makes more profit time to time. I'll monitor this coin and adjust switching pattern if it doesn't fit our needs. This is what I am talking about:  posted imageIt may work in a fast coin switching pool but it doesn't seem to fit with a pool like this. Did it really produce that many coins when it switch to it...? If it is ever that profitable then it must be so fleeting that it gains nothing by time it's switched; I think this shows how bad the coin is: https://www.whattomine.com/asicIt is so much of an anomaly that it's effecting the daily average for your pool. I think your profitability calculations need adjusting for this coin or you just remove it from the rotation. It works really well just switching between Adz, Start, and Dash; Digitalcoin is just ruining what could be a nice stable and profitable pool. Hope I'm not being too pedantic here. |
|
|
|
okay...i can turn off ethash...but this groestl...can i mine only neoscrypt and skein if they aren't on the top of norm profit list?
What are you trying to do? i'm trying to mine only neoscrypt and skein multialgo switching=)but there is no such work in hub workers=)there is groestl, myraid-groestl,neoscrypt and skein=) I'll have a look at posting a script after work that will switch based on your parameters. would be nice=)need example for at least. Decided to post it on github.com under MultiPoolMiner. It's been a long day... I'm heading home now. Need to test then I'll release the script here: https://github.com/aaronsace/MultiPoolMinerEdit: It's now live! Too tired to test it much but it seems to work. Let me know what you think. https://github.com/aaronsace/MultiPoolMiner/releasesemmm...for noobs...what to do with that?=) Enter your user name and hash per second. Then just run it. (right click and you can edit or run) You already have the miners; obviously enter the location that you have saved them. I'll it make more intuitive to use at some point but once actually open the script you will see it's easy enough for now. |
|
|
|
okay...i can turn off ethash...but this groestl...can i mine only neoscrypt and skein if they aren't on the top of norm profit list?
What are you trying to do? i'm trying to mine only neoscrypt and skein multialgo switching=)but there is no such work in hub workers=)there is groestl, myraid-groestl,neoscrypt and skein=) I'll have a look at posting a script after work that will switch based on your parameters. would be nice=)need example for at least. Decided to post it on github.com under MultiPoolMiner. It's been a long day... I'm heading home now. Need to test then I'll release the script here: https://github.com/aaronsace/MultiPoolMinerEdit: It's now live! Too tired to test it much but it seems to work. Let me know what you think. https://github.com/aaronsace/MultiPoolMiner/releases |
|
|
|
|
Show Posts
