Latest posts of: Crypto

Show Posts
Pages: « 1 2 3 [4]

on: June 03, 2017, 09:17:23 AM

Quote from: Zimmsquad on June 02, 2017, 08:32:37 PM I set my cards to 1150 core but I have many different cards and some revert their core to 1106, 1128, 1168 and 1203. Any ideas why the cards don't listen? All are on powerlevel 6 with only the 1500 straps copied to 2000. What hashes do you get with them? Also what is their default memory speed? Do you overclock via smOS ? I have problem overclocking ram via smOS my settings are not accepted. Anyone has an advice?

on: June 03, 2017, 07:05:27 AM

hello everybody, got two rigs one with 6* rx 470 8gb asus strix and one with 6* rx 470 Nitro pus sapphire 8gb My problem is that when I try to set OC settings, they are not accepted? Mainly I try to O/C vram but no success... Is this a known problem? how can I fix this? Also I am getting 22,6 ghs with Strix and 24,5 with Nitro, If I modify timmings without overclocking VRAM will I get better performance?

on: June 01, 2017, 09:00:20 PM

Quote from: tytanick on June 01, 2017, 02:10:41 PM Guys, its isnt that its not recommended I just recommend only miners with custom config thats it Those pre defined miners were first when the system was alpha but i would rather give full controll for users than entering dummy wallet address of sia and eth Hello tytanick, I have the following issues: 1 Rig Asus Prime & g4560 6* rx 470 Nitro plus 5 of them on pci-e risers 1 directly on pci slot. 1) GPU 0 hashing between 2 and 4mh/s All others at 24 2)While rig screen shows 125mh/s total simplemine.net reports much lower (e.g. 60-80) simplemine.net shows really low clock speeds! Temps are fine sub 60!

on: May 26, 2017, 10:14:00 AM

Is an 8gb stick enough, or is it possible that in future update we will need 16gb?

on: May 25, 2017, 03:17:05 PM

Similar problem with h270 prime (asus) Got 2 rigs g4560, Asus h270 Prime, 8gb ram & x6 470 8gb Above 4G enabled in bios, Pci set in Gen1 wherever possible. Both rigs work with all Six gpu with smOS. Windows 10 enterprise boots only when 5 GPU are connected, as soon as I connect a 6th they Crash on Boot with ATTEMPTED EXECUTE OF NOEXECUTE MEMORY Whichever gpu I disconnect and leave 5 online, windows boots all 5 cards recognized.... Does anyone know about this issue;

on: May 25, 2017, 01:53:28 PM

I also have problem with this mobo. 5 cards work out of the box when I add no6 then system hangs with ATTEMPTED EXECUTE OF NOEXECUTE MEMORY. This is with g4560 CPu and windows 10...

on: May 24, 2017, 05:57:22 PM

got 2 Rigs with x6 570 8gb Is this normal for GPU 0 to be stuck at 12 mhs while others are at 24? also is it normal for cards 1-5 to fluctuate between 4mhs to 24 mhs?

on: May 24, 2017, 05:08:00 PM

Ok here is the deal. Got 2 rigs g4560, Asus Prime, 8gb ram & x6 470 8gb Both rigs work with all Six gpu with smOS. Windows 10 enterprise boots only when 5 GPU are connected, as soon as I connect a 6th they Crash on Boot with ATTEMPTED EXECUTE OF NOEXECUTE MEMORY Whichever gpu I disconnect and leave 5 online, windows boots all 5 cards recognized.... Does anyone know about this issue; Do windows 7 support 6 GPU + igpu, do I need a mod for that ?

on: May 24, 2017, 01:02:09 PM

Quote from: fonyo on May 24, 2017, 11:59:04 AM Quote from: Crypto_Future on May 24, 2017, 11:45:27 AM 1st of all huge props. Windows 10 still not working with my rig, hangs when GPU no 6 is connected with MEMORY NO EXECUTE ERROR. 2nd. Its running now and I am minning eth: A)Cards spin up n down all the time this normal? B)Some cards report very low MHz C) How do I get payed in ETH or BTC? Where can I see my balance? A) they are probably overheating and being throttled down B) try changing core/mem or use a modded bios C) you need to use your own pool configuration with your own worker name or wallet address, the default configs only mine for tytanick and are there for guidance only. ok can anyone please provide help on how to do that.... Ok I understand it is from the line below each algo! The cards are overheating like mad, any bios mods you would sugest? Overclocking from simplemining does not seem to work for the rig with asus strix cards while the one with nitro works ok!

on: May 24, 2017, 11:45:27 AM

1st of all huge props. Windows 10 still not working with my rig, hangs when GPU no 6 is connected with MEMORY NO EXECUTE ERROR. 2nd. Its running now and I am minning eth: A)Cards spin up n down all the time this normal? B)Some cards report very low MHz C) How do I get payed in ETH or BTC? Where can I see my balance?

on: May 24, 2017, 10:13:43 AM

Quote from: Bones972 on May 24, 2017, 10:08:26 AM Try this.... Worked for me on my Asus H270-Plus https://www.youtube.com/watch?v=Z1FnEYI25z0 I have followed this but no luck still. What CPU do you have?

on: May 24, 2017, 09:53:34 AM

Hello, I built two rigs with Asus H270 Prime and G4560 and Windows 10 I am trying to connect 6 x 470 on it. 5 cards get recognized, when the 6th card tries to get drivers machine hangs with ERROR ATTEMPTED EXECUTE OF NOEXECUTE MEMORY .\ This is the same on both rigs. First rig is default asus drivers & AMD 16.6.1 Second rig default asus drivers & Amd drivers from Microsoft download. Anyone have an opignion on that? Is it possible for this to be a problem with the integrated gpu of g4560? Is it true that windows 10 have a HARD limit at 6 GPU max so the igpu is the problem?

Pages: « 1 2 3 [4]