 Show Posts
|
|
Pages: « 1 2 3 [4] 5 »
|
|
ive updated to .98 right when it came out and noticed that i was yielding 15-20 gh/s more than previous firmwares.
i was hash around 565-570gh on the pool and this was shown on cgminer as well, but today i noticed that cgminer, bertmod and pool is displaying a decline in hash rate (cgminer showing 550gh down from 565gh), any idea why this is? the temps on the unit remain the same and i havent touched anything since i updated.
|
|
|
|
Long time Avalon owner. Always had an issue on my Batch 2/3 4 module where if I oc'd too much I would get a decrease in GH eventually (sometimes 20-40%). Run those @ 335 (auto 325-335) 24/7 around 107GH and they maybe restart cgminer once or twice a week but never slow down. Really loved the 20130821 firmware. So I now have 7 minis running (stock 20130723), and let me tell you now 2-3 of them have so far had this issue where they slow down to under 30GH as low as 4GH or so? GAH! Changed the worst two to 20130821 and will see. However I am disappointed, it appears the --avalon-auto option doesn't work? (currently set 350 clock on page with these options: --quiet --avalon-auto --avalon-temp 50 --avalon-cutoff 70 --avalon-freq 350-375 ) < Those settings never show above 350 on the status page. Setting 375 manually works.  put a sheduled task to restart cgminer, hash is same, hw error increases. i had same issue, after restarting cgminer every 4 hrs untouched for weeks, and constant max.. im having problems with my miner dropping low hash rate after hashing for a while, how do i set a scheduled task to restart cgminer? sorry. very new here! thanks for any help Scroll back a few pages. it's here! hi if you start reading from here https://bitcointalk.org/index.php?topic=140539.msg3419505#msg3419505you should find the info you need any problems let me know ok i added those two lines, will revert back with results after letting the miners run for a bit here are the lines i added in my scheduled task tab: */5 * * * * cgminer-api devs | grep "MHS 5s] => ....\.." && /sbin/reboot */5 * * * * cat /proc/loadavg | grep "2.\." && /sbin/reboot |
|
|
|
Long time Avalon owner. Always had an issue on my Batch 2/3 4 module where if I oc'd too much I would get a decrease in GH eventually (sometimes 20-40%). Run those @ 335 (auto 325-335) 24/7 around 107GH and they maybe restart cgminer once or twice a week but never slow down. Really loved the 20130821 firmware. So I now have 7 minis running (stock 20130723), and let me tell you now 2-3 of them have so far had this issue where they slow down to under 30GH as low as 4GH or so? GAH! Changed the worst two to 20130821 and will see. However I am disappointed, it appears the --avalon-auto option doesn't work? (currently set 350 clock on page with these options: --quiet --avalon-auto --avalon-temp 50 --avalon-cutoff 70 --avalon-freq 350-375 ) < Those settings never show above 350 on the status page. Setting 375 manually works. put a sheduled task to restart cgminer, hash is same, hw error increases. i had same issue, after restarting cgminer every 4 hrs untouched for weeks, and constant max.. im having problems with my miner dropping low hash rate after hashing for a while, how do i set a scheduled task to restart cgminer? sorry. very new here! thanks for any help |
|
|
|
|
hi guys, my avalon mini will be hashing at full capacity for close to 24 hrs and then all of the sudden drop to like 3gh/s, the machine continues to mine but at a reduced hashrate ~3-5gh/s. i have to log in to the avalon interface and reboot it before it will go back hashing at ~60gh/s, any idea why?
any help is appreciated! thanks!
|
|
|
|
|
is it possible to connect to the avalon using browser and the ip address that i configured it to without directly connecting an ethernet cable from the avalon unit to my computer?
or is the only way to access the avalon unit is by direct ethernet connection?
edit: i meant to ask if i could access the avalon unit if the avalon unit and my laptop are on the same wifi network, or would i be required to use a direct ethernet cable connection each time i want to configure the avalon unit.
|
|
|
|
|
hey guys,
my jupiter is reporting HIGHER temps after i switched the heat sink stock fans for cooler master jetglo fans (95CFM). any idea why this is happening?
any insight is greatly appreciated! thanks.
|
|
|
|
|
to my understanding, the jupiter devices will not come with a PSU? what brands and models are you guys looking into and why? KNC says jupiter will consume less than 1000W of power, so - is there really a difference between using a 1000W PSU and a 1200W PSU? anything below 1000W PSU for jupiter is going to damage the device?
|
|
|
|
|
only method of getting the machine is stockholm pick up...no shipping options yet..
|
|
|
|
|
still have coins for trade? can do PP or WU payments.
|
|
|
|
|
lol, "scam like an egyptian".
no offense to other egyptians.
|
|
|
|
|
how much for the 50gh/s unit?
|
|
|
|
1块钱一个就卖
1rmb = 1xrp?....... |
|
|
|
|
to send XRP to me:
我的XRP址: rJKzQJfRgMkgDbyA3y3hQZ8mfw3nSzNde8
XRP傳送完畢請告知我你的XRP址以及你的BITCOIN錢包址以便我發BTC給你.
你若想要我用等值的USD透過PAYPAL或WESTERN UNION支付也可以!
有問題歡迎發問!
|
|
|
|
|
can also make payments via PP or WU in USD, your choice.
to send XRP to me:
- Login to your Ripple account.
- Go to the "Send" tab, transfer your XRP to me: rJKzQJfRgMkgDbyA3y3hQZ8mfw3nSzNde8
- Send me a message with your Ripple address and your bitcoin address.
I am ok with using an escrow as I just joined this community and don't expect anyone to give me their full trust.
If I bought from you and the transaction was smooth, please leave a message here to vouch for me. Reputation goes a long way especially when you are just starting out!
|
|
|
|
|
can you provide the hash rate and power consumption of your rigs? im merely curious!
|
|
|
|
|
rJKzQJfRgMkgDbyA3y3hQZ8mfw3nSzNde8
|
|
|
|
|
what are some payment methods good for this transaction? new here, any help is appreciated!
|
|
|
|
|
mining with a laptop is not worth it!! don't even bother.
may want to look into purchasing an ASIC device and attach that to your laptop.
|
|
|
|
What he meant:
You know Blizzard? you know what Blizzard's "soon" is?
BFL will deliver soon.
  |
|
|
|
|
