Nope "that" wasn't it. It did it again.
Try the one I thought it was and change USB cable to a different slot on the puter.
Be back later

I'm not sure of the firmware but it's an 800+ but my oldest of the batch after warranties for overheating.
The 4aa was a key in trying to track this down so I swapped the suspected miner with a brand new one and will try that and report back in 24 hrs or so.

Ya I went through the versions of bfgminer till I got one that worked and it was v 5.2.0 for me... [edit] now running 5.4.1
No USB hub just original cables plugged into an old computer running Arch.

Sometimes going through the process of writing it down helps me think of different options.
It's hard to find which one it is out of the 4 miners and it's so random but my hypothesis I start with "that" one
and work my way through them till I find the culprit.

Thanks

Hi, what does

"BFL 4aa: Received queue result response: ERR: INVALID COMMAND" mean?

After this happens the miner slows down and when I press quit it takes a long time to release/shut down/get a command prompt again.

This happens once, twice, three times or not  at all for more than 24 hrs. It's random and I'm trying to figure out what is doing this.

I'm using bfgminer 5.2.0 and it does the same on the latest version too. I was trying the earliest version that will run all the monarchs because it's like someone changing the voltage because it's the same if I made a change in the current version of bfgminer and they don't like it and when I quit it take a while before I get the command prompt back.

This has been happening for about  two months now.

OS Arch Linux, ample power, original USB cables.

Any help or anyone else having this problem?
Thanks

I saw it go by on my console! I like this kind of solve. I have 3.5 Th and it gives me encouragement to see this.

It won't load with the armory generated bitcoin.conf only with the p2pool config that I have.

I had in the armory generated config
rpcuser=generated_by_armory
rpcpassword=long password

but it won't load with that
but it will load with this...

listen=1
gen=0
server=1
daemon=1
rpcport=8332
rpcconnect=127.0.0.1
rpcallowip=192.168.1.12
rpcuser=bitcoinrpc
rpcpassword=AJacKm5v8MHFBU1vvHjznhAiy3MckM8jPMDiX3grbpc5
maxconnections=30
upnp=0
mintxfee=0.00005
minrelaytxfee=0.00005
disablewallet=1

Something has changed somewhere.

How do I get armory to generate that secure bitcoin.conf like it did originally?

Ah ha! I found it looking in the bitcoin log there's an issue with it accepting connection here's the error that led me to check out the bitcoin.conf
"ERROR: CScriptCheck(): ca0ee950fb4c1092d5b8e91b236db50b541a1eb13f8de26f7334cb7f259b6f6d:0 VerifySignature failed: Non-canonical signature: S value is unnecessarily high"

I switched the bitcoin.conf off and it didn't work so I turned my old p2pool conf on and it connected.

So that's fixed for me but wonder why it would work in linux and not in windows?

Also I'm a billionaire according to my wallet I have 184467440736.77636719 BTC more than there is in existance... When I do a repair wallet it goes away.

Thanks for your help your last comment is what got me thinking about antivirus, firewall then bitcoin log was the hint I needed.

One other thing I noticed is that while in this offline state if I click on wallet properties I hear a system ding and then the interface is locked and just ding ding everywhere I click on the armory interface till I end task.

It only says...

Log file opened at 1447528977: D:\armoryW\armorycpplog.txt

And ArmorySetting.txt is this...

ManageSatoshi                        | False
NotifyMinPriority                    | 2048
MainWalletCols                       | ff0500003c0078005000a502
Wallet_removed for privacy_DNAA_RecvOther      | False
NotifyBlkFinish                      | False
MainGeometry                         | 01d9d0cb000100000000014c000001030000063e000003ee000001540000012200000636000003e 6000000000000
SkipStatsReport                      | False
SendBtcGeometry                      | 01d9d0cb0001000000000204000000f9000005690000032e0000020e0000011b0000055f0000032 4000000000000
LastBlkRecvTime                      | 1447513708.15
LastDirectory                        | D:\armoryW
Agreed_to_EULA                       | True
MonthlyID                            | 1115_9b0e52bc
NotifyBtcIn                          | True
SyncSuccessCount                     | 10
MainLedgerCols                       | ff0d14000000ad004800700096007000000000000000000000000000
DonateAlready                        | False
UseTorSettings                       | False
DNAA_UnlockTimeout                   | False
WltPropAddrCols                      | ff052200bd00d8004000ae00
AlwaysArmoryURI                      | 0
PrefEndian                           | >
NotifyDiscon                         | True
SkipAnnounceCheck                    | False
KeybdOSD                             | False
NotifyIgnore                         |
DNAA_IntroDialog                     | True
SatoshiDatadir                       | F:\Bitcoin
DateFormat                           | 25592d25622d25642025493a254d2570
DNAA_AllBackupWarn                   | False
DonateFreq                           | 20
DisableUpgradeNotify                 | False
ScrambleDefault                      | 0
AdvFeature_UseCt                     | 0
UnlockTimeout                        | 10
Default_Fee                          | 10000
LastFilterState                      | 0
MinimizeOrClose                      | Close
SkipVersionCheck                     | False
User_Mode                            | Expert
Load_Count                           | 52
First_Load_Date                      | 1446854151
Wallet_removed for privacy_DNAA_RemindBackup   | True
NotifyBtcOut                         | True
DNAA_DeleteLevelDB                   | False
SkipOnlineCheck                      | False
MinimizeOnOpen                       | False
FailedLoadCount                      | 0
First_Load                           | False
Wallet_removed for privacy_ChangeBehavior      | NewAddr
Wallet_removed for privacy_LedgerShow          | True
IgnoreAlerts                         |
DisableTorrent                       | True
LastBlkRecv                          | 383544
DonateLastPester                     | 0
DonateDNAA                           | False
NotifyReconn                         | True
SatoshiExe                           | C:\Program Files\Bitcoin
DNAA_DefaultApp                      | True
WltPropGeometry                      | 01d9d0cb00010000000001a700000086000005830000039b000001b1000000a8000005790000039 1000000000000
LastVersionLoad                      | v0.93.3

2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1076 - C++ block utilities loaded successfully
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1186 -
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1187 -
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1188 -
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1189 - ************************************************************
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1190 - Invoked: C:\Program Files\Armory\ArmoryQt.exe --satoshi-datadir=F:\Bitcoin --datadir=D:\armoryW
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1191 - ************************************************************
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1192 - Loading Armory Engine:
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1193 -    Armory Version        : 0.93.3
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1194 -    Armory Build:         : e59e10d38c
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1195 -    PyBtcWallet  Version  : 1.35
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1196 - Detected Operating system: Windows
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1197 -    OS Variant            : 8-6.2.9200--Multiprocessor Free
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1198 -    User home-directory   : C:\Users\twebit\AppData\Roaming
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1199 -    Satoshi BTC directory : F:\Bitcoin
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1200 -    Armory home dir       : D:\armoryW
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1201 - Detected System Specs    :
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1202 -    Total Available RAM   : 15.98 GB
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1203 -    CPU ID string         : Intel64 Family 6 Model 42 Stepping 7, GenuineIntel
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1204 -    Number of CPU cores   : 8 cores
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1205 -    System is 64-bit      : True
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1206 -    Preferred Encoding    : cp1252
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1207 -    Machine Arch          : amd64
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1208 -    Available HDD (ARM)   : 151 GB
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1209 -    Available HDD (BTC)   : 242 GB
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1210 -
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1211 - Network Name: Main Network
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1212 - Satoshi Port: 8333
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1213 - Do wlt check: True
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1214 - Named options/arguments to armoryengine.py:
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     nettimeout      : 2
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     rescan          : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     ignoreAllZC     : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     enableSupernode : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     disableModules  : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     port            : None
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     interport       : 8223
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     skipStatsReport : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     forceWalletCheck: False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     rebuild         : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     datadir         : D:\armoryW
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     clearMempool    : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     offline         : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     coverageOutputDir: None
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     armoryDBDir     : DEFAULT
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     satoshiPort     : DEFAULT
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     useTorSettings  : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     netlog          : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     keypool         : 100
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     coverageInclude : None
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     forceOnline     : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     skipAnnounceCheck: False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     redownload      : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     multisigFile    : DEFAULT
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     disableTorrent  : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     testAnnounceCode: False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     mtdebug         : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     logDisable      : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     settingsPath    : D:\armoryW\ArmorySettings.txt
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     verbosity       : None
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     doDebug         : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     enableDetSign   : True
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     testnet         : False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     rpcport         : DEFAULT
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     satoshiHome     : F:\Bitcoin
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     satoshiRpcport  : DEFAULT
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     logFile         : D:\armoryW\ArmoryQt.exe.log.txt
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1216 -     disableConfPermis: False
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1217 - Other arguments:
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1220 - ************************************************************
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:1620 - C++ block utilities loaded successfully
2015-11-14 13:50 (INFO) -- BDM.pyc:418 - Using the asynchronous/multi-threaded BlockDataManager.
2015-11-14 13:50 (INFO) -- BDM.pyc:419 - Blockchain operations will happen in the background. 
2015-11-14 13:50 (INFO) -- BDM.pyc:420 - Devs: check TheBDM.getState() before asking for data.
2015-11-14 13:50 (INFO) -- BDM.pyc:421 - Registering addresses during rescans will queue them for
2015-11-14 13:50 (INFO) -- BDM.pyc:422 - inclusion after the current scan is completed.
2015-11-14 13:50 (INFO) -- ArmoryUtils.pyc:3531 - Using settings file: D:\armoryW\ArmorySettings.txt
2015-11-14 13:50 (INFO) -- announcefetch.pyc:95 - Reading files in fetcher directory:
2015-11-14 13:50 (INFO) -- announcefetch.pyc:104 -    announce         : 96f5d5f4253bac5528333c4fef3afd5fa0e931816bfd4c4c8b43d85cee002bb9
2015-11-14 13:50 (INFO) -- announcefetch.pyc:104 -    bootstrap        : b62c08932668ce162d51226135940724e90f4c71704ac936f74cc153b34cc251
2015-11-14 13:50 (INFO) -- announcefetch.pyc:104 -    changelog        : 1c01304b876de3e75672c8b13d9a00157556b86612afac1c88ffc40a8d7dfb90
2015-11-14 13:50 (INFO) -- announcefetch.pyc:104 -    downloads        : 28efee8047ee0a2c26ac9f785d93566fb5a45c20a794da6f972aa48db50ec35a
2015-11-14 13:50 (INFO) -- announcefetch.pyc:104 -    notify           : 87fa1adcd555be83a71b4f5935a6d4f85178ccbf5043531fdd71432b57d127ca
2015-11-14 13:50 (INFO) -- announcefetch.pyc:271 - Fetching: https://bitcoinarmory.com/announce.txt?osvar=8&os=win&ver=0.93.3&id=9b0e52bc
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2736 - loadWalletsAndSettings
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2790 - Loading wallets...
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2849 - Number of wallets read in: 1
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2854 -    Wallet removed for privacy                      "   (Encrypted)
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2863 - Loading Multisig Lockboxes
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2298 - Setting up networking...
2015-11-14 13:50 (ERROR) -- announcefetch.pyc:283 - Specified URL was inaccessible
2015-11-14 13:50 (ERROR) -- announcefetch.pyc:284 - Tried: https://bitcoinarmory.com/announce.txt?osvar=8&os=win&ver=0.93.3&id=9b0e52bc
2015-11-14 13:50 (INFO) -- announcefetch.pyc:271 - Fetching: https://s3.amazonaws.com/bitcoinarmory-media/announce.txt
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2327 - Internet status: 0
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2525 - loadBlockchainIfNecessary
2015-11-14 13:50 (INFO) -- ArmoryQt.py:2546 - Setting netmode: 0
2015-11-14 13:50 (INFO) -- ArmoryQt.py:1514 - setupUriRegistration
2015-11-14 13:50 (INFO) -- ArmoryQt.py:1632 - URL-register action: AskUser
2015-11-14 13:50 (INFO) -- ArmoryQt.py:664 - Usermode: Expert
2015-11-14 13:50 (INFO) -- ArmoryQt.py:1810 - Changing usermode:
2015-11-14 13:50 (INFO) -- ArmoryQt.py:1811 -    From: Expert
2015-11-14 13:50 (INFO) -- ArmoryQt.py:1819 -      To: Expert
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:50 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss
2015-11-14 13:51 (INFO) -- ArmoryQt.py:6763 - BDM is safe for clean shutdown
2015-11-14 13:51 (INFO) -- ArmoryQt.py:6805 - Attempting to close the main window!

Looked and it says "2015-11-14 13:41 (INFO) -- ArmoryQt.py:5962 - Dashboard switched to user-OfflineOnlinePoss"

I've also tried copying all data to my OS's default data directories and checking let armory start bitcoind/qt but it doesn't start bitcoind/qt
Everything works when loading linux mint from live cd with the same parameters so I'm assuming something to do with win10.

Any other tips?
Thanks

Anybody having problems with connecting to the new Armory? I use custom startup options in the shortcut like this --satoshi-datadir="D:\Bitcoin" --datadir="D:\armoryW" but it won't connect with bitcoin core running and windows 10 firewall allowing connections. Settings in armory are unchecked for "Let armory run Bitcoin/QT in the background"

I can usually get this to work but I'm at a loss here.
edit: I tried the checkmark Let armory run Bitcoin/QT in the background too and specified the directories.
Thanks

Is there a way to put the voltage in the bfgminer.conf file now that bfgminer supports changing voltages? And if so what format? I set the cutoff temp like this "set-device" : [   "all:temp-cutoff=78"] and wonder if something similar for voltage?

Also, they go down in voltage well but going up in voltage the program, I won't say locks up but, can't get out of the Manage devices screen untill I force it to quit and even then it doesn't release it for about a minute or so.

Again, great feature!

• bitforce: Enable changing voltage from the Manage TUI

Thank you for this it works great with my monarchs! I've got two of them that go over 920ghs and this will come in handy in the summer.

For me it was sometimes off. Other times saw an inflood of transactions.
Sorry to say I shut it down and moved to pool mining again but I have one question...

Why? if this is a relay, do we/I have to connect to what it says on the home page of this post. Rather connect to anyone? place or thing?
I don't understand much but can't there be other relays in the bunch other than the initial connect to "java -jar ./RelayNodeClient.jar public.us-east.relay.mattcorallo.com 127.0.0.1:8333" ? reliability seems to be not so much currently. No dis on Matt. But why is he the only one to initiate the relay "string" for lack of better word.
I've seen it where it goes down and you can't connect. Connect to another?
Just saying
Thanks

I haven't seen this elsewhere but if it's a duplicate just let me know.
I found this site http://p2pool.jir.dk/bitcoin/ that finds nearest nodes.
The first time you load the page is not that accurate but refresh and it's better.
Cheers!

OK thanks. I tried CoinCadence.com but too far away then I tried another that wasn't too bad then I connected to one in Guelph then I figured do it myself.

I tried that alternate front end but it didn't show the "Payout if a block were found NOW" section at the top and it's really all I know how to look at right now. But I guess a person could really build that out with the right experience.

OK thanks for that. They are already opened so I I'm good to go.

Ya I'm greeeeen but got it and then I forwarded my domain name raintowers.com to it and that worked too! I'm just running it on ubuntu.
Don't know what I opened myself up to with regards to security blabla .

I just started my publicly accessible p2pool at http://50.70.132.95:9332/static/
barely figured it out but got it. Whew!

Hi, I see these errors once and a while with 800 Monarchs  BMA0: Ran out of queued IDs after 6 of 7.
What does it mean? Also sometimes I see  hex2bin str truncated.
And BMA0: incorrect result count 10 (INPROCESS:00x00) will try 10 (COUNT: 100x00)
I'm using 4.9.1 built from github on ubuntu x64
Thanks