 Show Posts
|
|
Pages: « 1 2 3 [4] 5 »
|
|
"TizzyTazzy - We are your reliable host with extremely low cost"
-fankih-
|
|
|
|
|
I have tried MSI Afterburner with such .cfg adding:
[ATIADLHAL]
EnableUnofficialOverclocking = 1
UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode = 2
AccessibilityCheckingPeriod = 0
And it just doesn't go lower than 850MHz
-fankih-
|
|
|
|
Noticed it right after posting  |
|
|
|
|
And is it normal that if I try to underclock from 850MHz to lower my 6970 it will reset up to 1375MHz (MEM) ?
Is there anything I could try?
I have tried Afterburner and it's the same result...
|
|
|
|
Normal output with only 6970 (cgminer 2.3.1 reaches 430MHash/s right away and 2.4.1 atleast took so long to reach 430Mhash/s that I was bored wait .. It was hitting only ~400Mhash/s)
cgminer version 2.3.1 - Started: [2012-05-22 17:55:55]
--------------------------------------------------------------------------------
(5s):438.6 (avg):420.5 Mh/s | Q:8 A:12 R:0 HW:0 E:150% U:6.22/m
TQ: 3 ST: 3 SS: 0 DW: 0 NB: 1 LW: 16 GF: 0 RF: 0
Connected to http://gpumax.com:8332 with LP as user 38abc05d047448e3b6cac977d24
Block: 000008271fd09da37a545bd1a5b6e885... Started: [17:55:55]
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 70.5C 2878RPM | 428.4/430.9Mh/s | A:12 R:0 HW:0 U:6.22/m I: 9
--------------------------------------------------------------------------------
GPU 0: 427.9 / 432.1 Mh/s | A:8 R:0 HW:0 U:5.82/m I:9
71.0 C F: 72% (3128 RPM) E: 960 MHz M: 850 Mhz V: 1.175V A: 99% P: 1%
Last initialised: [2012-05-22 17:55:55]
Intensity: 9
Thread 0: 214.2 Mh/s Enabled ALIVE
Thread 1: 214.6 Mh/s Enabled ALIVE
[E]nable [D]isable [I]ntensity [R]estart GPU [C]hange settings
Or press any other key to continue
|
|
|
|
5850 on its own cgminer version 2.4.1 - Started: [2012-05-22 17:10:04]
--------------------------------------------------------------------------------
(5s):324.3 (avg):299.0 Mh/s | Q:24 A:35 R:0 HW:0 E:146% U:3.6/m
TQ: 3 ST: 3 SS: 0 DW: 0 NB: 1 LW: 56 GF: 0 RF: 0
Connected to http://api.bitcoin.cz:8332 with LP as user fankih.fankih
Block: 00000706eee47bcbd8ee04dee565b9f3... Started: [17:10:04]
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 73.0C 3403RPM | 302.3/299.0Mh/s | A:35 R:0 HW:0 U: 3.65/m I: 8
--------------------------------------------------------------------------------
GPU 0: 302.3 / 300.4 Mh/s | A:35 R:0 HW:0 U:3.72/m I:8
73.0 C F: 59% (3405 RPM) E: 820 MHz M: 300 Mhz V: 1.088V A: 99% P: 0%
Last initialised: [2012-05-22 17:10:04]
Intensity: 8
Thread 0: 151.2 Mh/s Enabled ALIVE
Thread 1: 151.3 Mh/s Enabled ALIVE
[E]nable [D]isable [I]ntensity [R]estart GPU [C]hange settings
Or press any other key to continue
|
|
|
|
|
When I'm running this 5850 on it's own I can only achieve : GPU 820 MEM 300 VDCC 1.088. If i'll lower mem / vdcc it will crash. If I'll raise the GPU the drivers will crash.
At the moment it's running with setup mentioned before and fan @ 3375RPM & 72°C.
Do I'm planning to put 6970 back to see if it's back to same, but according to those numbers this card is quite a failure (5850) at least what I have stalked what others have?
Should I just try to cancel my 60€ trade for this card or is anyone else interested to buy this off from me with that price?
-fankih-
|
|
|
|
cgminer version 2.3.1 - Started: [2012-05-21 19:35:27]
--------------------------------------------------------------------------------
(5s):532.3 (avg):549.5 Mh/s | Q:152 A:197 R:1 HW:0 E:130% U:7.40/m
TQ: 4 ST: 6 SS: 0 DW: 10 NB: 4 LW: 492 GF: 0 RF: 0
Connected to http://gpumax.com:8332 with LP as user 38abc05d047448e3b6cac977d24
Block: 000008e04149cb37e3ed4a220c3932f0... Started: [19:49:50]
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 74.5C 3519RPM | 407.0/400.2Mh/s | A:136 R:1 HW:0 U: 5.11/m I: 9
GPU 1: 73.5C 2074RPM | 149.9/149.6Mh/s | A: 61 R:0 HW:0 U: 2.29/m I: 9
--------------------------------------------------------------------------------
Thread 0: 203.5 Mh/s Enabled ALIVE
Thread 1: 203.5 Mh/s Enabled ALIVE
GPU 1: 149.9 / 149.9 Mh/s | A:61 R:0 HW:0 U:2.30/m I:9
74.0 C F: 32% (2119 RPM) E: 400 MHz M: 900 Mhz V: 1.000V A: 0% P: 0%
Last initialised: [2012-05-21 19:35:29]
Intensity: 9
Thread 2: 74.9 Mh/s Enabled ALIVE
Thread 3: 75.0 Mh/s Enabled ALIVE
[E]nable [D]isable [I]ntensity [R]estart GPU [C]hange settings
Or press any other key to continue
this is from CGminer 2.3.1 |
|
|
|
|
Hey,
I was thinking if my 800 W PSU would be too low for this setup since 5850 is getting only 400MHz to GPU core and 900 MHz to memories and I can't change them in CGminer even I try to lower the memory and increase the GPU MHz.
It's saying voltage 1.0V for 5850 and 1.175 for 6970.
5850 is giving 150MHash/s and 6970 is giving 400MHash/s (was giving 430Mhash/s on its own)
What could I try out?
-fankih-
|
|
|
|
|
Thanks!
Good and fast trade!
-fankih-
|
|
|
|
|
I could buy MW3 for my friend with 3 BTC.
Please PM me since, I don't have rights for it yet.
-fankih-
|
|
|
|
Is it 100k BTC or $100k ? If its $100k then its nowhere near the biggest BTC theft so far.
What's the biggest BTC theft in $ then? -fankih- |
|
|
|
Hello, I am Finn my self and I would like to see how many people are in to mining and reading this Forum. Please post in to this if you are a Finnish miner.  -fankih- |
|
|
|
Has anyone found a bar / store where you can buy alcohol with bitcoins? -fankih |
|
|
|
|
I first went for Slush's pool and then I tried Deepbit too, but I went back to Slush again.
Would there be some even more profitable pools?
|
|
|
|
i want to see a miner that doesn't destroy a computer's hardware. too much is too much
How does any miner destroy your computer's hardware? |
|
|
|
|
