 Show Posts
|
|
Pages: « 1 2 3 [4] 5 »
|
Is this the old vanilla coin?
No you are confused with Vcash [XVC] by John Connor, This is Viacoin [VIA] i just visiting here, will via get better than before ? |
|
|
|
|
hmmm sweetts
will this sweet enter polo ?
|
|
|
|
Done, waiting for him to assist me how to use this baby thanks a lot  Check out the Telegram group, we can help you out here. PMed. need to wait gunthar to active my account first before i join Oh, whoops sorry about that I better stay away then. stay away with who ? i'm here from bitify |
|
|
|
Done, waiting for him to assist me how to use this baby thanks a lot Check out the Telegram group, we can help you out here. PMed. need to wait gunthar to active my account first before i join |
|
|
|
Done, waiting for him to assist me how to use this baby thanks a lot |
|
|
|
|
sounds guun , i mean good, any license left ?
thanks
|
|
|
|
It's not needed he uses Watttool
GPU 1180
Memory 1750
both running at 904MV
true that. I never go above 1180MHz for the core on the last phase and it's never over 925mv. btw memory read intensive dagger-hashimoto doing fine on 850mv (total power from these 6 is below 920W in dual mining) eth only is 816W:  Excellent settings. Thank you, boys. I am now graphics cards cloks 1180 GPU, 2100 GDDR5 RAM, - 48 mV, power limit +0. I now have 6 x 250 Sol / s = 1500 Sol / s and the power consumption is 880 W (measured by energy meter).
Zcash v 11 is doing quite good.
Undervolted 4 x cards I get 1046 H/s and 360 watts at the wall.
what software both of u use for that ? |
|
|
|
I have 277 H/s on RX 480 nitro stock
where i can get stock bios for this one ? thanks Question : 3 of 6 vga (rx 480) showing 0.00 on all claymore version (6 - 11), i restore their bios, still 0.00 1 is rx480 4 gb , 2 are rx480 8 gb what must i do ? - find another bios for this one ? - reinstall driver -> tried many times - change their clock and memory value ? thanks for any help stock bios are default manufacturer bios, so from their website. what brand/model of GPU ? what's your command to start claymore ? what drivers version you use ? have you tried stock clock ? tried other miners successfully ? What OS ? shappire nitro+ with switched bios, 4gb and 8gb yes i return their bios, still 0.00 os win 10, not tried other miner, any suggestion ? still missing : command to start claymore, drivers version, have you tried stock clock. for other miner, you can try with optiminer to see if you see a difference. Also post the beginning of the claymore log (like 30 lines ish) driver version 16.11.3 - 16.11.5 all error i'll try optiminer this morning log also, now cooling my head a bit GPU_FORCE_64BIT_PTR 1 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100 ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal xxx.xxx -zpsw x -mport 0 -tt 80 -tstop 95 -r 1 -ftime 5 -i 6 |
|
|
|
I have 277 H/s on RX 480 nitro stock
where i can get stock bios for this one ? thanks Question : 3 of 6 vga (rx 480) showing 0.00 on all claymore version (6 - 11), i restore their bios, still 0.00 1 is rx480 4 gb , 2 are rx480 8 gb what must i do ? - find another bios for this one ? - reinstall driver -> tried many times - change their clock and memory value ? thanks for any help stock bios are default manufacturer bios, so from their website. what brand/model of GPU ? what's your command to start claymore ? what drivers version you use ? have you tried stock clock ? tried other miners successfully ? What OS ? shappire nitro+ with switched bios, 4gb and 8gb yes i return their bios, still 0.00 os win 10, not tried other miner, any suggestion ? |
|
|
|
I have 277 H/s on RX 480 nitro stock
where i can get stock bios for this one ? thanks Question : 3 of 6 vga (rx 480) showing 0.00 on all claymore version (6 - 11), i restore their bios, still 0.00 1 is rx480 4 gb , 2 are rx480 8 gb what must i do ? - find another bios for this one ? - reinstall driver -> tried many times - change their clock and memory value ? thanks for any help |
|
|
|
is this the expected performance with stock settings and v.9.3GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #2: Ellesmere, 8192 MB available, 36 compute units
GPU #3: Ellesmere, 8192 MB available, 36 compute units
GPU #4: Ellesmere, 8192 MB available, 36 compute units
GPU #5: Ellesmere, 8192 MB available, 36 compute units
ZEC - Total Speed: 1400.007 H/s, Total Shares: 126, Rejected: 0, Time: 00:04
ZEC: GPU0 235.090 H/s, GPU1 233.052 H/s, GPU2 233.269 H/s, GPU3 232.907 H/s, GPU4 231.216 H/s, GPU5 234.473 H/s
me crash with -i 1 - 6 idk what happen, after sleep try to reinstall ati for that cpu only crashing with stock rx480 8go nitro stock , seem better with mod bios
any link for that mod bios sir ? |
|
|
|
here is a pm I got on Christmas Day no less: I deleted some of it> ------------------------------
DevFee redirecting hack for multiple coins and miners.
Take 100% of the earnings, you already payed enough devfee's.
Coins supported : ZEC, ETH, ETC, EXP, XMR
Miners supported and tested :
- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP)
- Claymore's ZCash AMD GPU Miner v9.2 (ZEC)
- EWBF's CUDA Zcash miner (ZEC)
- Claymore's CryptoNote GPU Miner v9.6 (XMR)
- Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR)
- Kachur XMR miner (XMR)
Price : 0.05 btc This offer is happening for 2 reasons the fee is 2.5 with no ssl the fee is 2.0 with ssl Lets do some math in my case I have 7-7.5 kh on zec. I earn .6-.7 zec a day. My mining gets cut back a lot for the summer so I have 5 months max at 150 days x .66 it is 100 zcash coins 2 percent fee is 2 coins I use ssl. so i would be paying .05 btc to save 2 zec coins that is about 0.096 btc So math wise if you have around 8kh and you are a tight with money paying the 0.05 btc is close to making sense. it might pay to do. not principal or moral sense but close to dollar sense. If you are at 16kh it would certainly save you some money. If claymore were to reduce fee to 1% in the 9.3 edtion a cheap dollar oriented miner would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh. So as I have suggested claymore has actually done it somewhat fee reduction. More fee reduction must be done by claymore. 2.5 to 2.0 is a start maybe in 9.3 drop fee to 1.5 if you use ssl My point is this I am not paying .05 btc to save maybe .096 btc But if Claymore had ssl fee at 1.5 % paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone. and if Claymore had ssl fee at 1% paying .05 btc to save maybe .048 btc would really be dumb. Here is a redacted pm  you have only 7.5khs with 12 rigs ? my rigs are not 6 card which would be 72 cards my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each so I do about 185h a card i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought I think 6 card rigs are a loser method for mining. This is my opinion as risers and big psu's are simply not the way to go. so most of mine are four card . 5 four card with one 3 card total 23 cards   I have some 3 card and a 1 card are you use 1 motherboard for it ? |
|
|
|
|
gpu showing 0.00 is there something wrong with it ?
but they booting normally
must i reinstall video driver again ?
thank you
|
|
|
|
Funny, so I've installed windows on one rig, Win 10 Pro, especialy for Claymore 8 and my 480's and like 10 years go, Win freezes completely on a random basis It feels like nothing has changed since XP etc Anyone got Win10 running stable on a Z170 based Motherboard ? (Asrock Gaming K6) Ubuntu runs flawless. Which drivers do you use ? When I'm trying to install 15.12 it just hangs at 2% for the AMD App manager for 480 use latest driver Yes, I'm on the latest whql driver without the hot fix, might that be the problem? change battery to high performance ? > https://www.youtube.com/watch?v=-txw9u6X5FA16 gb virtual memory ? > https://www.youtube.com/watch?v=NkHjRKFUnNcturn of superfetch ? > https://www.youtube.com/watch?v=RPvOMlxLQAIi turn into onboard mode, and freeze disappear, but before it, no hope for it, keep freeze randomly and lastly find intelHD driver, uninstall it if any |
|
|
|
Funny, so I've installed windows on one rig, Win 10 Pro, especialy for Claymore 8 and my 480's and like 10 years go, Win freezes completely on a random basis It feels like nothing has changed since XP etc Anyone got Win10 running stable on a Z170 based Motherboard ? (Asrock Gaming K6) Ubuntu runs flawless. Which drivers do you use ? When I'm trying to install 15.12 it just hangs at 2% for the AMD App manager for 480 use latest driver |
|
|
|
|
still cant connect to flypool, pc hang with i 0 - 4
no problem on nanopool
any help ?
|
|
|
|
Hi, Im having trouble with nanopool's guide for speed results.....
My miner reads 560h/s to 565h/s however on nanopool 6hrs reads 510h/s and 2hrs to 24hrs not much different. Im losing about 50+h/s. Fees would be 2.5% which is about 15h/s. Does anyone else have this problem with nanapool under cutting or is it just me....
I had that problem, and others too. Moved to flypool and the problem was gone...  sir in flypool if i setting i (intensity) more than 0, windows hang any guide ? edit : now 0 also hang Have you undervolted and overclocked? I had something similar on my 390X rig, I used to use an optimized bios I had made for ETH, but anything even with -i 0 would hang the gpus within 30-60 seconds. now with the core at 1000mHz and the voltage at 1150mV it's rock stable. I notice the same timings I used for Eth aren't that awesome with ZCash, too... same here, using bios for zcash, good in nanopool, when switch to flypool, hang gpu stopped Can somebody please help me what is the exact formula to count ZEC mining profitability?
I know there are many calculators but I want to be sure they tell me the right numbers.
http://www.coinwarz.com/calculators/zcash-mining-calculatorthe number always change based on btc/zec and zec diff , block reward, fee |
|
|
|
Hi, Im having trouble with nanopool's guide for speed results.....
My miner reads 560h/s to 565h/s however on nanopool 6hrs reads 510h/s and 2hrs to 24hrs not much different. Im losing about 50+h/s. Fees would be 2.5% which is about 15h/s. Does anyone else have this problem with nanapool under cutting or is it just me....
I had that problem, and others too. Moved to flypool and the problem was gone... sir in flypool if i setting i (intensity) more than 0, windows hang any guide ? edit : now 0 also hang |
|
|
|
Can someone help me to set up nicehash pool on BTC address? It doesn't show me hashing in their web interface when I search after my BTC address that has been set up in the config file  i'm also newbie here, we're on same page, pm me i'll help |
|
|
|
|
