@stunna
there is a guy named:
Myacc3
Myacc5
Myacc7
Myacc8
Probably has the other numbers to but only see this.
Also ocakypa32 and ocakypa |
|
|
|
That latest "GeForce 331.82 Driver" which is required to run this release hangs and BSODs my pc. Therefore, not able to run 18th DEC release 
On GTS 450
Can you help out guys it's a bit urgent ? I'm having the same problem, 2 780's Clean install? |
|
|
|
is that configuration based off of autotune? or did you just selected it?
The settings were originally "-D -H 1 -m 1 -d 0 -i 1 -l K16x16 -C 2", copied from here: https://litecoin.info/Mining_hardware_comparisonWhich were working fine at first for multiple hours of mining but wouldn't work once I restarted the client so I tweaked them a bit until I got it to work again. The autotune settings haven't really been working for me, just a bunch of "result does not validate on CPU" Take out -l because that could be and old config that no longer valid. You need to autotune after every upgrade |
|
|
|
Recently started mining. I've got 2 Gigabyte GTX 770 4GB however I'm seeing some weird results.
My settings looks like this: "-i 1 -l K16x16 -C 2"
I'm seeing a lot of "result does not validate on CPU", basically every change I make to the settings will cause this error. Even restarting the client with the same settings will give me this error a bunch of times, I have to tweak the settings, try to launch with new settings and then switch back to my old settings to get it to work. Even launching it without any pre-set settings will cause an error.
Once I do get it to work, one of the GPUs is reporting a hashrate of ~2000 khash/s which is obviously false, and the other is showing ~350 khash/s. However, if I change my settings to "-i 0", one of the GPUs will show a hashrate of ~90,000 khash/s while the other one remains at 350.
Also, looking at MSI Afterburner only one card is being utilized, GPU #1 is at 100% usage while GPU #2 is sitting at 0% usage, I can't seem to get both GPUs to be utilized.
Any suggestions or ideas?
is that configuration based off of autotune? or did you just selected it? |
|
|
|
Stunna, I think you should make a whitelist for zero rolls, or even need to talk in chat before you can type thing...to stop these bots spamming zero rolls
it will be better to have a min bet(ie; 1 satoshi), else its gonna be so much hassle for us to whitelist each and everyone  Maybe it should go into PD3 development  it be automatically done based on the above criteria to be whitelisted |
|
|
|
|
Stunna, I think you should make a whitelist for zero rolls, or even need to talk in chat before you can type thing...to stop these bots spamming zero rolls
|
|
|
|
oh my god i can't belive that
after the lag, impossible of roll
now the lag, 1roll per 2 second !
There are bots trying to overload the system. |
|
|
|
the site is buggy
Yeah I'm having trouble now too, lagging. ONly for the past half hour I'd say It is because people are attacking it again |
|
|
|
Guys, I wonder if anyone is using GTX 780s to mine litecoins? I already do this using my 7990 system with no issues but when I try to set up cudaminer in order to utilise the 2 x 780s in my other system, I am getting no hashing.
I installed cuda 5.5 (64bit) and set up the .bat file in the cudaminer directory but when I run it, no autotuning takes place and hashing never really starts. Cudaminer launches and attempts to hash and my system becomes hiddeously slow, taking 1 minute to move the mouse pointer. The script appears correct and is taken from my pool's configurator (litecoinpool.org).
Are there any other dependencies required in order to mine with Nvidia cards which I am missing? I saw the OP has put some other dependencies for windows but I am not sure what to do with them? They don't seem to be as straight forward as download and install?
You need drive about like 3xx or something, can't remember the exact number. make sure the drivers are up to date |
|
|
|
Hi,
I have this weird gimmick with cudaminer with my GTX 670 where if I play a video, cudaminer gets about 20% more KH/s and GPU utilization increases by 10%. I can't think of any reason why this would be the case as the GPU clock never changes. Any idea why this happens?
Cudaminer by itself:
You're using with Interactive 1. Which means it is reserving GPU for your monitor. try using -i 0 That seems to have fixed the gimmick. Is there an explanation as to why it does that? The technical explanation would have come from Christian, but interactive 1 reserves gpu for usuage. |
|
|
|
Hi,
I have this weird gimmick with cudaminer with my GTX 670 where if I play a video, cudaminer gets about 20% more KH/s and GPU utilization increases by 10%. I can't think of any reason why this would be the case as the GPU clock never changes. Any idea why this happens?
Cudaminer by itself:
You're using with Interactive 1. Which means it is reserving GPU for your monitor. try using -i 0 |
|
|
|
so far as i know there is no more scrypt-mining-support with that version, try elder ones  Edit: i'm using cgminer versions 3.01 + 3.10 + 3.11 + 3.20 on different rigs 3.7.2 is the last version with scrypt support hm... i tried 3.3, 3.4 + 3.5 - but they are not running fine - so i got back to the old ones... you may test other versions before 3.7.2 or change the mining-software -> e.g. bfg-miner BFGminer will not detect the cards |
|
|
|
so far as i know there is no more scrypt-mining-support with that version, try elder ones Edit: i'm using cgminer versions 3.01 + 3.10 + 3.11 + 3.20 on different rigs 3.7.2 is the last version with scrypt support Tried 3.2.2 same startup error as above. Will not mine at all invalid nounce error! |
|
|
|
|
I'm using CGMiner 3.7.2 to do altcoin mining. However, my new R9 270x aren't performing the same at all. One is only getting about 40 KHs, but the second one is performing around 450KHS. I've tried fiddling with the configuration, but still the same result. This is my first Radeon based Rig. If anyone could point me in the right direction to get them preforming them the same.
I am getting this on startup: I'm not sure if it matters.
-12-05 15:27:18] ADL found less devices than opencl!
-12-05 15:27:18] There is possibly more than one display attached to a
-12-05 15:27:18] Use the gpu map feature to reliably map OpenCL to ADL
-12-05 15:27:18] WARNING: Number of OpenCL and ADL devices did not mat
-12-05 15:27:18] Hardware monitoring may NOT match up with devices!
-12-05 15:27:18] Probing for an alive pool
-12-05 15:27:18] Network diff set to 0
|
|
|
|
I'm up to 279 on my GTX 570 how?? im on less than 160 233 with my 570 :-(?? Be happy.. Im only getting 130kh/s But I can't get my cuda to go despite posting my conf doesn't seem like there's anything identify ably wrong with it from what I can see but I'm still getting Json errors. change allowip=10.1.1.* to allowip=All see if that helps |
|
|
|
I'm up to 279 on my GTX 570 how?? im on less than 160 233 with my 570 :-(?? Check my previous posts. you'll see my config However i have evga classified version it is factory OC'd autoconfig select F15x16 |
|
|
|
For solo mining, my coind command: -server -rpcuser=aaa -rpcpassword=123456 -rpcport=8100 my cudaminer command: -o http://127.0.0.1:8100 -O aaa:123456 -C 1 -i 0 -H 1 -l F14x16 This is what I usually have... listen=1 daemon=1 server=1 rpcuser=User rpcpassword=user rpcallowip=all rpcport=7785 rpcconnect=127.0.0.1 |
|
|
|
Primedice actually has never worked for me after the recent update and cloudfare issue. Now the homepage opens though, but when I login with my old id & pass, it shows a blank page. Any suggestions?
Old user accounts are lost. You must email support to recover any btc. You also need to create a new account |
|
|
|
Never used it to solo mine before but I didn`t think it`d be difficult
cudaminer.exe -o localhost:9322 -u blah -p 1
I think you have to add a --no-stratum flag to cudaminer. The next versions will automatically treat http:// and https:// URLs as non-stratum. Any objections? Also pass the -server flag to litecoin-qt or whatevercoin-qt when you start it (e.g. by editing the Windows shortcut accordingly). never needed the flags for solo mining. I would suggest their conf file for the qt is not setup correctly. What coin are you trying to mine? what is your conf file like? |
|
|
|
I can't seem to make this work for alternatepool.com . Point Your Miner To: stratum+tcp://miner.alternatepool.com:3333 Username: <Your BTC Address> cudaminer -o stratum+tcp://miner.alternatepool.com:3333 -u 1ABGZH6oWW6QbkPG4JEajC2q2bFMaJAhci -p x Here is my output: [2013-12-03 22:44:06] 1 miner threads started, using 'scrypt' algorithm.
[2013-12-03 22:44:06] Starting Stratum on stratum+tcp://miner.alternatepool.com:
3333
[2013-12-03 22:44:06] Binding thread 0 to cpu 0
[2013-12-03 22:44:23] stratum_recv_line failed
[2013-12-03 22:44:23] ...retry after 15 seconds
[2013-12-03 22:45:07] stratum_recv_line failed
[2013-12-03 22:45:07] ...retry after 15 seconds
[2013-12-03 22:45:36] stratum_recv_line failed btw, I have this working fine on multipool.us That is odd..works fine for me on that pool did you try -O Address:x instead? May I know your exact config? doing this: cudaminer -O stratum+tcp://miner.alternatepool.com:3333 -u 1ABGZH6oWW6QbkPG4JEajC2q2bFMaJAhci -p x I get [2013-12-04 08:23:42] 1 miner threads started, using 'scrypt' algorithm.
[2013-12-04 08:23:42] Binding thread 0 to cpu 0
[2013-12-04 08:23:44] HTTP request failed: Failed connect to 127.0.0.1:9332; No
error
[2013-12-04 08:23:44] json_rpc_call failed, retry after 15 seconds cudaminer -o stratum+tcp://miner.alternatepool.com:3333 -O 1G2p6NHUnCSE6prYYz3PjKiPkaM4c416rF:x -H 1 -i 0 -C 2 |
|
|
|
|
Show Posts
