New pre release with some more lhr fixes/adjustments. Reset device will now run each hour. TeamBlackMiner_1_30_cuda_11_5_pre.7z https://www.virustotal.com/gui/file/75a6af9d5a854e60629877562c0301782fb2e047989871c06548f62fe07a8908?nocache=13080ti; core: 0 default mem: (+1000) 10500mhz pl: 70% power lhr-unlock [1] = 81 MHASH stable for 1 hour. lhr-unlock [1] --tweak [1] = 85 MHASH stable for 8-15 minutes. 3060: lhr-unlock [1] = 32 MHASH stable for 1 hour. lhr-unlock [40] = 35 MHASH stable for 1 hour.
1.29 and 1.30 hash about 2MH/s slower than 1.28 on my RTX 3080 (Non LHR) 497.09, at least the reported hashrate is lower.
Increase the --xintensity to 284 (old default) to get back the 2MH/s or more. This miner works best on high diff and high intensity, but some pools works better on low intensity. Here is v1.29 been running on --xintensity 144 for ~2.5 days Old testrig with broken cards. [moderator's note: consecutive posts merged]
|
|
|
normal launch config is working here. Set ETC_WALLET=(your wallet) :loop TBMiner --algo etchash --hostname etc.2miners.com --port 1010 --wallet %ETC_WALLET% --worker-name %computername% timeout 10 goto :loop
v1.30 1. NVIDIA partial LHR unlock for all models. enabled with (--lhr-unlock) 2. Removed vardiff in the display when pool has static diff. 3. Reduced memory usage. 4. Added support for more pools. https://github.com/sp-hash/TeamBlackMiner/releases/pre-release. Linux probobly tomorrow. Unlock device 1 and 2 in the rig --lhr-unlock [0,1,1,0,0,0] Higher number give a faster speed (but can trigger LHR mode) --lhr-unlock [0,2,10,0,0,0] Another way to do a more agressive unlock (add tweak 1,2,3,4...) --lhr-unlock [0,1,1,0,0,0] --tweak [0,1,1,0,0,0] This version doesn't have a LHR detector but will reset the device every 5 hours just in case. TeamBlackMiner_1_30_cuda_11_5_pre.7z https://www.virustotal.com/gui/file/75a6af9d5a854e60629877562c0301782fb2e047989871c06548f62fe07a8908?nocache=1[moderator's note: consecutive posts merged]
|
|
|
If you specify a lock core no PL need
My code unlocks without the need to lock the clock. If you don't know how the LHR MR Sp__ works
LHR was created by NVIDIA to reduce the hashrate, so creating a miner that breaks LHR is not an easy task. There are different ways to do it. T-rex way is working good, but failing to unlock on higher power. That meens that around ~90 will be the limit. TBM is not happy with 90, and we try to do 100MHASH++. But we miss is LHR detection and Auto-tune, so more work is needed. will have to explain to me why you copy LOLMINER? you have the same changelog :|
https://github.com/sp-hash/TeamBlackMiner/issuesWe have 153 solved issues, and fix the issues as they come in. Miners want the features of the other miners, so we fix it for them. Our changelog is long, and we have releases every 5-7 days. We are new in the market and don't have all the features of the other miners yet, but it's coming. Our miner is getting better and better for each release. 1) it is not recognizing '--fan' and sets fan speed to 40% by default. I tried using -T 52 but that didn't work either. Though I think maybe '--fan' is not one of the commands supported by TBM, why did it recognize '--fan' in the first attempt but not thereafter?
2) it is not recognizing --lock-mclock or --mclock and gives 'memory lock settings not available for this gpu' and keeps it at 6801mhz (default). I tried using --lock-mlcock 7660, --lock-mclock [[7660,7660]], --mclock 860 but nothing seems to work after the 1st attempt.
Kindly point out what am I doing wrong and how to sort it out. Also, is there any discord server for TBM?
https://github.com/sp-hash/TeamBlackMiner/blob/main/OPTIONS.mdThe correct parameter is called --fan-speed-min (or -f) --lock-mclock is only working for the supported clockspeeds and not for overclocking. Use another program for that. We don't have a discord, but you can reach us on here, on github, and reddit.
|
|
|
Your card is abit better than mine, but powerlmit 65 instead of 75 seems to help. But 75 is needed to do 100+ stable.
|
|
|
I guess my core clock and power settings where too high for the t-rex miner, been running it for a while and it recovered up to ~70 ish. But tbm without LHR code is doing 69MHASH. Perhaps I need --lock-cclock to make it work? Please share your settings..
I am running
core +0 (default setting) trottles abit mem 10700 (+1350) tdp 75% p0 state
|
|
|
The T-Rex unlocker isn't working on the latest driver for the 3080ti Tbm is +80% faster on the 3080ti with the latest drivers. LOL
|
|
|
nice job! please keep it up and unlock more if possible. currently with trex i can get up to 94 and fluctuate between 91-94. Not on the 497.09 driver. T-rex is only doing 40MHASH
|
|
|
No you can keep them in the same config. f.ex rig with 4 cards, Amd in device 0 and 3 nvidia cards --xintensity [1024,4096,4096,4096]
Run with --list-devices to see the correct order.
|
|
|
and another with one RX5700XT and this one will only mine consistently if I use Xintensity 448 or below. Above 448, it ends up crashing and upon restarting, the Dag is reported corrupted, and it enters a miner restart loop.
The AMD intensity needs to be 1/4th of the nvidia intensity. so 448 is the same as 1792. To reduce dag validation error you can try --dagintensity 1 , or with a low number. This will slow down the dag memory buffer creation, but is stable on higher clocks
|
|
|
It works. I will try the lhr-unlock again in the next version. LHR cards are a pain. Take forever to find the perfect settings, but here is a preview of v1.30
|
|
|
Just some debug output we forgot to remove. Don't worry about it.
|
|
|
cant wait to try it out. 100mh unlock on 3080ti would be insane
Not 100 in v1.30, but stable ~80-85 on all drivers. The problem left is that each rig need manual tuning to get it right. Our code is also missing detect LHR, so our only option is to reset the device every 10-30minutes or more, and hope the unlock will stay unlocked.
|
|
|
Currently seeing VARDIFF instead of DIFF for Difficulty value in 1.29. Is this correct?
No This might be a small bug. I think MPH have a static diff. Will check it. Same problem for me. Windows 10, 496.79, 3080 No LHR, ethermine.
So I reproduced this on etheremine when testing the new LHR unlock for 3080ti on maximum oc. I reverted a change in the code and it seems towork now. Will include the fix in 1.30. The LHR2 unlock with the latest drivers (windows 497.09) will have 3 or more modes. 3080ti LHR1: 72MHASH LHR2: 75MHASH LHR3; 78MHASH LHR4: not yet stable. The current beta version will reset the unlock every 5 minutes. Because we haven't made a way to detect LHR yet. Enable with --lhr-unlock [0,2,3,0] Power around 230 watt. Will be released in v1.30. Note that older drivers can give better results, but we want to try to do it on the latest driver.
|
|
|
Same problem for me.
You can try to run with --xintensity 284 (the default in 1.28)
|
|
|
no... it's windows 10
Which pool? AMD or nvidia? All our testrigs run fine all night with 1.29.
|
|
|
miner stop ...don know why.. never happen before.. running 496.98 nv driver..
did you run the linux build?
1060 6GB. when I write --tweak value 0-7 there is no change. maybe I'm doing something wrong?
Tweak is normally used with a high intensity setting.
|
|
|
Getting closer to a 90-100MHASH unlock on 3080ti LHR2 Hashrates fluctate, but stable without triggering the LHR for ~5 minutes at 100% tdp. v1.29 cuda 11.5 build with the following parameters: --log --lhr-unlock 1 -U [ 0 ] Not yet production ready but you can check if it unlocks. When the unlocking fails, hashrates fall to 50-60.. (driver 496.49) when testing start on lower tdp like 70, or 80, and increase Beta testers with LHR cards wanted
|
|
|
Miner is slow for my RX570 4GB cards at the moment - 28.5mh with Tbm and 30.6mh with Trm/lolminer for example. But i saw hashrates over 30mh in this thread. Not so important, but maybe someone can say something about that.
Users are reporting good results with --xintensity 60 latest drivers. You might need to add a few watts as well to reach 30.
|
|
|
Currently on TBM 1.28 and I notice that GPU solution duration time has increased significantly.
1.28 have multiple issues reported, so you should rollback to 1.27 (but reduced GPU solution time is not one of the reported issues) I have recieved more LHR cards this week and busy with the lhr2 unlock, but we will try to get a patch out today or tomorrow.
|
|
|
|