I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?
Usually it is going to be a connection someplace. I would check your network cable, even try swapping it. Do you see a red light that is illuminated on the orange pi? If not then double check the power connection to the controller board is firmly seated in the power plug. Then double check your USB plug/cable to the first controller board connection. Lastly check the cross connect serial cables. These would be the places I would check. It is usually something simple. Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as securely fit as possible.. Seems mine is DOA :/ to check if the PI is bad plug the HDMI output into a monitor if you get a load of CPU errors then it might just need a flash of the micro SD card i did have that issue on a few minis if you are in the uk i have spare Orange PIs that i got from them if you pay the postage il send you one thanks Paul I don't get any video output when I plug the orange pi hdmi out into my monitor then is a DEAD Pi where are you thanks Paul I got everything working! It turned out my orange pi didn't come with a micro SD card in it. I went out and bought one and followed the Baikal guide on how to install the right files on it and then i plugged it into the orange pi and everything is well. Thanks though
|
|
|
I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?
Usually it is going to be a connection someplace. I would check your network cable, even try swapping it. Do you see a red light that is illuminated on the orange pi? If not then double check the power connection to the controller board is firmly seated in the power plug. Then double check your USB plug/cable to the first controller board connection. Lastly check the cross connect serial cables. These would be the places I would check. It is usually something simple. Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as securely fit as possible.. Seems mine is DOA :/ to check if the PI is bad plug the HDMI output into a monitor if you get a load of CPU errors then it might just need a flash of the micro SD card i did have that issue on a few minis if you are in the uk i have spare Orange PIs that i got from them if you pay the postage il send you one thanks Paul I don't get any video output when I plug the orange pi hdmi out into my monitor
|
|
|
I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?
Usually it is going to be a connection someplace. I would check your network cable, even try swapping it. Do you see a red light that is illuminated on the orange pi? If not then double check the power connection to the controller board is firmly seated in the power plug. Then double check your USB plug/cable to the first controller board connection. Lastly check the cross connect serial cables. These would be the places I would check. It is usually something simple. Thanks, there is not a red light on the orange pi, however the ethernet port lights on the orange pi light up. the orange pi power cord seems as securely fit as possible.. Seems mine is DOA :/
|
|
|
I just got my miner and plugged everything in correctly. I've had it turned on and it's still flashing the colors after 10mins, and it doesn't seem to be using the ethernet connection (I can see that the light isn't on for that port on the ethernet switch)? Any ideas whats wrong?
|
|
|
hold on, I am having trouble communicating with the time difference.
anyone on the list is covered and unfortunately anyone not on the list isnt
Why am I not on the list? I posted earlier in this thread I was down for 1 before the 30 was accounted for. Edit: I messaged baikalminer on skype and they said they could try to squeeze me in anyway though!
|
|
|
Put me down for 1.
Also what PSU do you guys recommend?
|
|
|
How much $usd these make per day? when is estimated ROI?
|
|
|
In the latest claymore ethereum miner I don't see an option for -a 2 or any -a at all, although i see a low intensity more -li (could use -li 2) is that what you mean by -a?
|
|
|
How much is an Antminer L3 (without psu?) and how much $usd per day does it make with current prices? also with that algo how often does the difficult rise?
|
|
|
Slightly Off topic, but why do you guys prefer (why did you get) pandaminers over just building your own rig? I may consider getting a pandaminer but one of my main concerns is seemingly lack of resale value
|
|
|
How much different in % is XMR more profitable than eth not counting electric costs?
|
|
|
I think they may be about the same mhs and power consumption when properly flashed and tweaked but i don't know for sure
|
|
|
You guys get 29mh with RX 470? Any guide? I get around 20 mh
Gotta flash the bios, modding the memory strap timings. with hynix I put the 1500 value in the higher ones 1625, 1750 and 2000. Also overclock the mem, (can underclock and undervolt the core too)
|
|
|
How profitable is this compared to zec/eth gpu mining?
|
|
|
Anyone have this working with 4gb 470s or 480s? (dual mining zec and eth, both claymore miners)
|
|
|
I looked at the Zcash forum and it shows people are mining with the open source GPU miner, that's on a test and not for real zcash right? when will real zcash be mineable? and is it a good idea to test first with the open gpu miner or will there be a new better miner?
|
|
|
My best result so far
ETH only
Sapphire Nitro RX470 4GB x 6
Each Card 25.4MH
Whole Rig 152MH
Power Draw is 640W on the wall
Running for weeks
What clocks and voltages?
|
|
|
Is it ok to connect powered risers directly with the molex? I have a 5 non ref RX 470, all with 8 pin connectors.
Yes that is the best way. Although you may not want to connect more than 2 gpus per molex chain. 3 may be okay but I am not certain
|
|
|
|