Thanks for sharing it is a little odd they would have different versions of the hashing boards. Were the hashing boards in the module the same? Or did they put a mix in the same module even?
Thanks again for sharing!
I think that the last of my S5+ had put together with spare parts and repaired already before shipping to me. Total three different set of blades in one miner? It's not normally possible. And why he came to the old iron sheet housing, not aluminum housing, as the other two S5+ miners shipped before? Does sounds like that one had a harder life then the rest before you got it. I am surprised they shipped with the way it sounds like that module was. I wish we could see stats. We now know it was to get rid stock of chips, and this miner did that very well for them.
|
|
|
Here you go: -- novak Thank you novak! I was afraid of turning it much on my own. This explains a lot. Has anyone used the RPI 1 B with it and RPI 2? I was wondering if there is any noticeable difference for this with the RPI 2 that is worth the upgrade cost of getting another PI. Was not sure if worth buying one or not.
|
|
|
Another not working S5+ hashboard from my DOA arrived miner with broken FAN. This time it was from the other side of miner, not from with broken Fan cube. Pictured is to see that it is completed witg hashboards from different batches. Click to enlargeI sent it to China on Friday, 57 EUR postage with EMS. As you can see, at least one radiator is broken off during transport. Thanks for sharing it is a little odd they would have different versions of the hashing boards. Were the hashing boards in the module the same? Or did they put a mix in the same module even? Thanks again for sharing!
|
|
|
Has anyone tested to see which is best on RPI Minera or Raspbian running cgminer? I thought I would get it today, but looks like Tuesday I'm getting a RPI model B.
Just wondering if anyone has tested both.
|
|
|
marco i've sent you a message about the avatar campaign, can you check please?
Will reply to PMs as soon as possible! I sent a PM a few minutes ago. Thanks in advance!
|
|
|
I find it interesting machine is 123 dollars less with hashnest option (before fees). It would seem like S7 would be same price for shipping as hashnest, then add on fees.
But I guess they get income from you each month this way so likely they want you to try it.
|
|
|
2 c1 at 200 with 0675
miners status: 19m10s 812.09 784.51 19m19s 792.60 813.62
so 2*c1 at 1kw and 1.6th
980w for 800ghs?. i was doing 1.1ths at 0660 at 252.1 and it was pulling 960w from the wall. I think hes saying "so 2*c1 at 1kw and 1.6th" So underclocking two an getting 1.6k for 1k watts between the two. I could have read it wrong, but i think that is what hes saying.
|
|
|
then lets have some +15% to kill some pussys ))))))) one or two like this and i think i will get drunk most of the time! just to cope with it Solid +15's would kill hobby mining for most. I hope to never see the 15-20 normal jumps we had long ago. One big thing look at price today it's headed the wrong direction :/
|
|
|
What is the price you will be having on PCI-E connectors? Will you carry those?
Also will you be selling the PSU's and what price?
I'm just trying to gauge price to get whole package set up.
|
|
|
I don't want to.. but I can do 5 if I have to for a bit. Happy I sold off some of my older gear. Guess we will see but I just want it to go back to low 2's.
Guess we will see. I really don't want 5 to be new norm.
|
|
|
Nice review thanks fro sharing it. How did you get somethings like "Customer Service". Was not sure how you got that percentage.
And again nice job!
|
|
|
This is funny but some water splashed to one of my antminer s4s Holy guacamole! When you say "some water" and "splashed" what does that mean? This looks like a lot of water poured into it. I'm guessing maybe rain splashing from window? Or a big water split? I would like to hear OP say story now that I think about it. I have never seen this before on S4 that I remember.
|
|
|
windows 10 has been harder still trying to get more then 2 sticks to work on a hub.
I will let you know how the RPI install goes hopefully monday. Once I get it I at least wont keep dropping from network. After I get my production stick and a few more U3's I should be set up for my little solo mining. which rpi I only have the newest model I went with the original B model as I had good luck with it in future past. If it turns out to not be enough I will order a RPI 2. I also have a windows machine that is almost always on, so that is kinda last resort.
|
|
|
What would a full kit look like on price? One with board, PSU's, all PCI-e cables, etc.
And congratz that is one heck of a PSU, nicely done.
|
|
|
windows 10 has been harder still trying to get more then 2 sticks to work on a hub.
I will let you know how the RPI install goes hopefully monday. Once I get it I at least wont keep dropping from network. After I get my production stick and a few more U3's I should be set up for my little solo mining.
|
|
|
Bitwisdom is going up:
Bitcoin Difficulty: 56,957,648,455 Estimated Next Difficulty: 59,963,232,138 (+5.28%) Adjust time: After 819 Blocks, About 5.4 days Hashrate(?): 453,542,410 GH/s
Not the direction we want to go. Have to wonder at this point how many 5+ weeks we can have, i'm afraid of it being the new norm.
no not the new norm but very likely we get to a diff close to 70-75 by oct. then I hope we flatten out. I hope your right on that. With the few companies working on chips still to come, I'm afraid of those adding to this. And I really think bitmain will be pumping out a lot of machines right now. And add winter hobby miners into equation. If we get lucky a lot of old A2 will finally come offline but some are in places so cheap on electricity i'm not sure when.
|
|
|
i am running a dsp-2000bb and efficiency at load is 92%, els around 96% so this means this should be platinium? while it is only silver ratad? the big one is rated at 96% load efficiency and 98% not full loaded and this is platinium, so this should be like super platinium? . If there was a rating it should be . I am very with my PSU's they are good quality, and a ton of PCIe cables. Which is nice for newer bitmain products. So add all of that and quality, it really is a great product overall.
|
|
|
What country is it being located in? (I don't need specifics as I understand it's under wraps.
.76 is not if you get this in a decent timeframe. i wish it was .05 that the magic number that would make me want to be investing for sure.
The country is Canada, and 0.076 is available right now, provided we have 100KW worth of hardware to give em. Yep, 0.05 would be very nice! Although at that point I'd start thinking it's too good to be true... It is out there... just I'm not sure it can be done without a huge investment. So hobby miners kinda have to settle with higher then "the big guys"
|
|
|
Stick back on. Debian is not liking my setup. Sorry if it falls out.
I will have a RPI (should be monday) to run it more stable.
|
|
|
Just heard from a hoster, bump. UPDATE: I've talked to a hoster that's given me a fee schedule as long as I keep their name a secret until we start the buy. I've dealt with them before, and you will know who they are before this kicks off, if this ever gets off the ground. 50KW @ $58/KW ($0.08/KWh) 100KW @ $55/KW ($0.076/KWh)
As for time frame, I'm thinking we wait and see for new miners to enter market from avalon/SP-TECH, so prices can come down to something reasonable.
What country is it being located in? (I don't need specifics as I understand it's under wraps. .76 is not if you get this in a decent timeframe. i wish it was .05 that the magic number that would make me want to be investing for sure.
|
|
|
|