It's been so long since I used a PTS miner.
On YPool with 280X getting about 3,050 c/m with clpts-v0.2.2. Sound about right?
|
|
|
Three pages of some kids picture. That's constructive.
How is the testing going?
The MN are working as they are supposed to but I believe there is an issue with the instantx (or whatever it is called). It has been a good test so far. There is no issue with instantx, it worked perfectly. But it is limited at the moment to transactions with less than 15 inputs and you need to pay a txfee of 0.001 per input.So, it is not finished yet, and masternodes do net yet handle instantx the way they are supposed to. http://spreadcointalk.org/index.php?topic=37.msg1017#msg1017(ATM there are too many masternodes trying to confirm instant transactions than intended) Mr. Spread is working on it. That why I said there is an issue. It's ok if things don't run perfect that is why we are testing. It's fine that we report everything that is going on not just always the perfect stuff.
|
|
|
Three pages of some kids picture. That's constructive.
How is the testing going?
The MN are working as they are supposed to but I believe there is an issue with the instantx (or whatever it is called). It has been a good test so far.
|
|
|
@ bitcreditscc @ yvg1900
Thanks for the advice.
I night be able to do yvg1900 before I can learn to set up my own private p2p pool.
I really have only known to do the solo mining multi rigs into one wallet that one way but I'll give this a shot.
|
|
|
@ bitcredits
Curious question.
This is the first coin that I have tried the set my config file with the rpcallowip=xxx.xxx.x.* but it will not allow it to work.
Am I missing something?
let me help you out: rpcuser=a rpcpassword=x server=1 daemon=1 rpcport=1098 port=4036 rpcallowip=192.168.1.1 rpcallowip=127.0.0.1 listen=1 rpcthreads=64 set miner to localhost:1098 and you should be good to go, happy mining But I am not trying single rig mine. I want to multi rig to one wallet. That is why I had the * in the rpcallowip.
|
|
|
@ bitcredits
Curious question.
This is the first coin that I have tried the set my config file with the rpcallowip=xxx.xxx.x.* but it will not allow it to work.
Am I missing something?
|
|
|
Try 5, 10 and 15. Lower x makes computer much more responsible and hash stays almost the same, sometimes lower x is faster. This with 750ti.
After 10 min gpu load from thread 0 drop to 0 power usage aprox6% and the other 5 still working normaly that's weard because on others alghorithms they work all 6 normal any sugestions It's working What got it working? The riser was the problem Glad you got it going.
|
|
|
Try 5, 10 and 15. Lower x makes computer much more responsible and hash stays almost the same, sometimes lower x is faster. This with 750ti.
After 10 min gpu load from thread 0 drop to 0 power usage aprox6% and the other 5 still working normaly that's weard because on others alghorithms they work all 6 normal any sugestions It's working What got it working?
|
|
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance 1) Are you using tsiv's or sp_'s (and which version)? 2) What does your bat look like? 3) What cards?4) What OP system and drivers? Those are just a few that might help out. 1)Tsiv version 2)spreadminer -o http://127.0.0.1:41677 -u x -p x 3)6x750Ti 4)Win 7x64 347.25 And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems Don't compare to other algos because they all stress the cards differently. I am not a pro at this but sounds like one card is kicking the driver. Or could be a riser issue. Don't know if you have tried to narrow down the problem by running one card at a time (-d 0 then change to -d 1 and so on) to see if they run without getting the big hash. If no issues then run 4 cards at once and then add one card at a time until all 6 are running. I know this is time consuming. I would also run 1 card to see if you get a crazy hash immediately or not. I am betting you will because you are 0 for 37,703 blocks found. Another idea is to have EVGA (or Precision) running and when you see that big hash start kicking in look to see if it shows 5 or 6 cards active. I had to do this before because I had a card disappearing and finally changed the riser and no issue since.
|
|
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance 1) Are you using tsiv's or sp_'s (and which version)? 2) What does your bat look like? 3) What cards?4) What OP system and drivers? Those are just a few that might help out.
|
|
|
OMG! No! .... No!!! Not the big red letters!!! Anything but those...
You a fan of The Christmas Story? First thing that pooped in my mind reading that.
|
|
|
How strong can this coin resist ASIC or FPGA ? I'm sure both and an optimized miner will come eventually if KHC is successful. The difficulty is extremely low right now so it's a good time to acquire and hold a decent amount in case it takes off. Any new algo has a chance as long as the developer continues to support. If or when KHC is added to Bittrex I believe there will be a massive price surge. hope KHC can be added to bittrex soon Holy s#it, why? So you can bring big red letters over here also.
|
|
|
Hi, I downloaded the testnet wallet today, I needed some coins to get it running.
Here is my address
Aliman, Edit your post and delete your address.
|
|
|
Coming from a guy who launched a coingen coin and then abandoned it lol okay there mate Good to have you aboard Hey how is DecryptRCoin working for ya? Must be working hard at developing your coin and making it a success right We should feel honoured that you took time out of your busy schedule to post in another coins thread then Thanks so much for doing that for us! We really appreciate it mate Noob, Please resist the urge.
|
|
|
Last page at least 3 person quote him.
Yes but I didn't quote him and I simply called him out on what he was FUDDING about and if he has enough DarkCoin to set up a masternode then I would assume that he supports DarkCoin right Also I have always said that DarkCoin and SpreadCoin could co-exist and become 2 of the great Crypto Currencies out there Ignore them completely. Hint: They want you to respond. It keeps them going.
|
|
|
Just received my first payment from the MN test.
How much was your payment if you don't mind me asking? Also how many masternodes do you have currently set up on the testnet? Only 1.997784 with 7 MN running.
|
|
|
Just received my first payment from the MN test.
|
|
|
An old saying for all you young'ins out there
"Never argue with an idiot, they'll just drag you down to their level and win with experience."
A very good quote, I know another one: "Any man can make mistakes, but only an idiot persists in his error." Good! please point out my error!! Personal attacts won't change the fact. I was going to leave well enough alone but why is everyone giving this person a platform. Look for yourself as they already admitted to what they are. Notice they did not ask what mistake. Please don't quote.
|
|
|
Is there a link to the actual pool? I was curious to look at it's page.
Sorry but my search feature is not working and I didn't see the pool link in the first two posts.
Take a look at the second post https://bitcointalk.org/index.php?topic=657601.msg7391883#msg7391883Coinshield Beta Pool: 204.27.62.234:9549 There is the only beta pool. With no front end Start miner with miner.exe 204.27.62.234 9549 YOUR_CSD_ADDRESS [threads] [connection_timeout]
Thanks.
|
|
|
Is there a link to the actual pool? I was curious to look at it's page.
Sorry but my search feature is not working and I didn't see the pool link in the first two posts.
|
|
|
|