|
I got 87-97w per card, how could it be the power supply deficiency is the reason why my rig was freezing, I also tried to change risers, usb cable, riser power cable etc, but i have the same problem, by the way I already use my cards a year ago, but Im only using it for lessthan 5 months then I was decided to stop and dissembling my rigs.
|
|
|
|
do you have a sample of a command line for this vios mode? I am using Phonix miner v 5.0e I only got 29MH for my Sapphire Nitro Plus RX 570 8gb, I know there is a way to increase my hash power, and also my miner always crash in every hour of running sometime my rig lagged. I hope you will share the good command line. Thanks
this is my Sapphire RX 570 8GB modded bios gives 1106/2100 812mV 30.48 MH/s75 W https://dosya.co/2kza64m22zhp/Ellesmeremodded.rom.htmlThat's great, i didn't get that kind of hash in my 570 8gb I only got 28.9MH, if you have a copy of your mode kindly share it to me, oh by the way if you have also an asus strix rx 570 4gb it would be grat if you share it here. Thanks |
|
|
|
Hi bounty manager, may I know if this signature campaign is extended Thanks.
I am waiting for the IDENA CEO's decision, I will make an update soon. Okay will wait for the update, for the meantime, I will not going to remove my signature. |
|
|
|
|
Hi bounty manager, may I know if this signature campaign is extended Thanks.
|
|
|
|
|
Good thing to see this thread it might be help me with my 8 Sapphire RX 570 8gb cards, I bricked it by randomly change its bios mode, I hope that i can get the solution in this thread. If you have a solution too with error 43 with my cards it's really appreciate it.
|
|
|
|
And psu can now handle the load.
as a rule of thumb 60% on an atx works well 24/7/365. and 1300 x .60 = 680 watts.
Just realized that 1300 x.6 is 780 watts Anyway, I kept changing the voltage down to 875mV for both core and memory and it is still stable. How much is it safe to downvolt?, I don't dare to put any lower value. I don't think its your PSU. If you want to eliminate your PSU as the culprit just run the miner with reduced intensity, basically run it at 50% and see if it runs then. It will use less power and you can see if its your issue or not. Try what I suggested and get your motherboard manual and find out about the available lanes on your PCIe slots. Do you think that the problem of freezing rig is not a pSU related problem? In my experience I've cleaned my mobo with cleaners then I also tried the randomly change my riser slot to my pcie but the problem remains. |
|
|
|
I also believe in the success of bitcoin forks. Many of them are highly versatile cryptocurrencies and have a very good chance of success with investors.
As to BTC forks, recently, like in the last year or so...er...no....that ship has sailed IMHO. If you do know of any, let me know, but BTC forks are completely out of favor now...and provide nothing in the way of return. brad I don't think forks are history. Many promising forks are also planned this year. For example, I read on Twitter that Ripple is scheduled to fork. Given the capitalization and mega-community of the XRP coin, I think it will be a big influx of money into the market. There are also some more promising forks. As far as my knowledge concern, fork is made just to correct or to enhance the current code and platform of one's coin project, like BTC2 the dev team saw the flaws of Bitcoin then they made the fork just to add enhancement and some very useful features to it. |
|
|
|
|
708
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: miniZ fast Equihash miner 144,5 150,5,3 125,4 192,7 210,9 150,5 BeamHashIII 96,5
|
on: August 31, 2020, 01:51:10 AM
|
I hope ypu will also develop for AMD cards, and kindly look at the other side of the 2 miner here like Claymore and Phoenix and fix the flaw of this 2 miner in your development, we don't care about the mining dev fee.  |
|
|
|
|
You can mine a coin that are minable with cpu, but i think the cpu coin are rare to find today because few of them are circulating in the market, you can try a masternode mining, you can use the vps in masternode mining and there's a lot of good POS/MN coin now that are placed in the market.
|
|
|
|
I tried yadacoin wayback then, I thought that it was not circulating in the market now bacause one of the exchange that my minted yada was stored was closed and i didn't withdraw my coin in my wallet there. Tell me is that coin still on the market? how about the development? |
|
|
|
That is also my problem right now, one of my rig has 12 rx 570 4gb and I am currently using a mining expert motherboard, I powerup my rig with 1000w corsair and 850w fsp, 7gpu for my corsair 1000w and 5 for the psf 850w, I noticed that in the first run of my mining apps, the hashrate was good but after a few minutes, my hash power decrease and some of my gpu turn to zero hashrate, and today everytime i run the miner it was frozen. I did almost of all of the troubleshooting method, changing the riser, the usb cable, etc. Now, my question is, is my gpu enough to power my rig? I saw also in the miner that my rig only consuming 1098w.
no try five on the 1000 watt four on the 850 watt see if they run overnight. a lot of atx psu age. a year or two into operation they cant do it. if 5 and 4 work over night try 6 and 5 remember to downvolt. My rig brings me a headache, sometimes the zeroed hash gpu will randomly rotated, after I've change the riser, usb cable and run the miner it will took around 3-4 hours then it will give the zeroed hashrate again in one of my gpu, then my rig started to freeze. |
|
|
|
Had same problem last night with an RX 470 8gb rig that has been sitting for 3 years.
Dropped in a rx 580 8bg (I thought the 470's were 4gbs')
All cards were bios modded
System recognized only the 580, code 43 on the the 470's
DDU says driver 20.xx.xx was installed for all cards (not the blockchain drivers I was trying to install)
1) unplugged the ethernet cable
2) DDU as administrator
3) Installed blockchain workloads driver from August 11 , 2017 (i am stuck in my ways)
4) Did not reboot
5) Ran AT pixelpatcher as admin (this was the key)
5) Rebooted
all good
I tried a half dozen things last night, gave up and tried the patcher as admin today.
That's one of my big problem on how fixing the error code 43, I almost tried fifferent methods but not luck until today, some say that we need to restore the original bios using the blockchain AMD driver, but I don't think that this will fix the problem. I know that there is a fix for our problem dude. |
|
|
|
|
That is also my problem right now, one of my rig has 12 rx 570 4gb and I am currently using a mining expert motherboard, I powerup my rig with 1000w corsair and 850w fsp, 7gpu for my corsair 1000w and 5 for the psf 850w, I noticed that in the first run of my mining apps, the hashrate was good but after a few minutes, my hash power decrease and some of my gpu turn to zero hashrate, and today everytime i run the miner it was frozen. I did almost of all of the troubleshooting method, changing the riser, the usb cable, etc. Now, my question is, is my gpu enough to power my rig? I saw also in the miner that my rig only consuming 1098w.
|
|
|
|
I was thinking that it was the solution, replaced my moded bios with factory, then tried to applied again the patcher but still the problem remains, I tried again to unpatched but it's the same error the card were given. I have 10 RX 570 8gb with error 43 problem. |
|
|
|
Every time i try launch the AMD software it says that There is no AMD GPU detected or check if it has been installed correctly which i checked it has been installed correctly and every time i go to device manager it says On my GPU that Windows has stopped this device because it has reported problems. (Code 43) please help i have tried updating the drivers on the GPU but that didnt seem to work.
Hello! Sorry, but it looks like you forgot to use atikmdag-patcher.exe maybe this will solve the problem. maybe i'm wrong about that. The atikmdag patcher is not always the solution, it didn't fix my card's error 43 problem, and I'm still searching for the fix of this problem, I already tried some tutorial on youtube but i have no luck fixing the eror 43 problem, I wish someone's here may share the working fix for the problem. |
|
|
|
|
It is hard to say that RX 500 4gb series GPU's are not capable of mining eth neither etc this coming october to december, I just rebuild my gpu rig again after of lessthan 2yrs that i shut it down, anyway there's a lot of coin listed in whatomine that are capable to mine with our gpu.
|
|
|
|
|
do you have a sample of a command line for this vios mode? I am using Phonix miner v 5.0e I only got 29MH for my Sapphire Nitro Plus RX 570 8gb, I know there is a way to increase my hash power, and also my miner always crash in every hour of running sometime my rig lagged. I hope you will share the good command line. Thanks
|
|
|
|
Hi guys do you have a recommended and safe mobile wallet for ETC, I just want to try to shift my rig to mine ETC it would be great if someone here share the link and the good mobile wallet. Thanks
Coinomi is good Yes, coinomi and trust app are very good wallets, you can add ETC to metamask as well, if you already use that app for ETH and tokens Great, the app is the best choice for mobile, I'm currently using both to store several tokens including ETC. The simple interface and also the attractive features are enough for me. There are a lot of mobile wallet available for this coin along with coinomi like Trust Wallet and Atomic Wallet. I personally like to use Atomic Wallet it offering some other features too like built in exchange with comfort and in secure environment. Thanks guys for all your suggestion, but I already stopped to mine ETC, looks like the 51 attacks hasn't solve yet, My minted coin (etc) hanged on the immature balance and the thansaction the will be needed is 80k, that is too much for a small miners like me. I hope they will fix this problem immediately. |
|
|
|
|
I found this definition of whitepaper that many ICO project themselves does not fully understand.
''A white paper is an authoritative document intended to fully inform the reader on a particular topic. It combines expert knowledge and research into a document that argues for a specific solution or recommendation. The white paper allows the reader to understand an issue, solve a problem, or make a decision.''
|
|
|
|
|
Show Posts
