Hi, We've added OC to the miners multipool: www.zpool.caCheers Nice. Can you please remove the one as its just OC   Tnx. fixed. thanks |
|
|
|
|
We've adjusted the profitability calculation for x13 to mBTC/GH/day from MH. Please adjust your profit switching scripts accordingly
|
|
|
|
Hello pool administrator! Add Azart coin! The X11 Algorithm. PoW+MN. The project started a few days ago, at the moment very profitable mining and masternodes! The main topic of the project here. needs to be on an exchange we support before we can add it. Thanks |
|
|
|
missing zpool  Hi! Have some issues with your API 1) Shares and Hashrate is 0 for all coins 2) Workers stats shows for whole ALGO not per COIN I have 4-5 pools with the same problem, and still didn't fixed it on my side...  I've added back the hashrates, but not shares. Shares is really irrelevant and just unnecessary load on the api. You can get workers either way. https://zpool.ca/api/currencies - is per coin https://zpool.ca/api/status - is per algo https://zpool.ca/api/blocks - is blocks Thank you! It's will be helps me) EDITED: Done! https://snag.gy/N2Hrzp.jpg  cool thanks. I think you'll find that the pools that don't have workers per coin, are the one that have BTC/autoexchange enabled. It's the nature of the pool when running in that mode. You're then mining an algo hitting the most profitable coins. |
|
|
|
Where is the mining possible?
it's not, the pool is obviously dead. |
|
|
|
Hi, We've added MTI to the miners multipool: www.zpool.caCheers |
|
|
|
|
upgraded and chain issues continue.
|
|
|
|
Hi, We've added AIRIN to the miners multipool: www.zpool.caCheers |
|
|
|
Update
Verge has once again been exploited yesterday with a 51 percent attack where one single miner bought lots of hashpower to gain control of Verge blockchain. Block 2155850 to 2206272 were mined with super-low-diff for the hackers. About 35 million Verge coins ($1.7M) were created in few hours rather than a few weeks – all alone by single person/group.
To elliminate this issue once and for all, we are releasing a small patch to prevent this from happening again. In the meantime we're working on a whole new codebase, more about this soon. Binaries for the patch can be found below and will soon be added to the OP. We urge everyone to update ASAP.
thanks for update dev... really hope this will be the last time verge was hacked  idiots, don't download these files, they're not from the dev. |
|
|
|
|
The worker count is the number of workers on that algo. Not sure how to change that yet.
|
|
|
|
Good afternoon Your pool does not give data (API) hashrate and workers, is it planning to fix the error? Our service www.new-coins.online has stopped working correctly on your pool. I've added back the hashrate for now. not sure the usefulness of the shares so it's still 0. Workers has always been there and seems it has values, not sure why you see 0? What API are you looking at? I'm getting API data https://www.zpool.ca/api/currenciesFor example "hashrate":0 for all coins. "ABY":{"algo":"scrypt","port":3433,"name":"ArtByte","height":1045362,"workers":1963,"shares":"0","hashrate":0,"estimate":"0.43929","24h_blocks":53,"24h_btc":0.00910992,"lastblock":1045357,"timesincelast":1095,"error":""}, I'm not seeing them all as 0..... { "$PAC": { "algo": "x11", "port": 3533, "name": "$PAC", "height": 67330, "workers": 1552, "shares": "0", "hashrate": 12705911604378, "estimate": "0.02506", "24h_blocks": 158, "24h_btc": 0.05488419, "lastblock": 67332, "timesincelast": 311, "error": "" }, "ABY": { "algo": "scrypt", "port": 3433, "name": "ArtByte", "height": 1045362, "workers": 1978, "shares": "0", "hashrate": 0, "estimate": "0.44075", "24h_blocks": 51, "24h_btc": 0.00875712, "lastblock": 1045357, "timesincelast": 1878, "error": "" }, "ARC": { "algo": "x11", "port": 3533, "name": "Arctic", "height": 345336, "workers": 1551, "shares": "0", "hashrate": 0, "estimate": "0.00284", "24h_blocks": 40, "24h_btc": 0.00061067, "lastblock": 345279, "timesincelast": 10325, "error": "" }, "ARG": { "algo": "scrypt", "port": 3433, "name": "Argentum", "height": 3109526, "workers": 1977, "shares": "0", "hashrate": 0, "estimate": "0.00055", "24h_blocks": 10, "24h_btc": 0.00055193, "lastblock": 3109357, "timesincelast": 9089, "error": "We are short of this currency (40.65092057 ARG). Please switch to another currency until we find more ARG blocks." }, "ARG-groestl": { "algo": "myr-gr", "port": 5433, "name": "Argentum", "height": 3109526, "workers": 24, "shares": "0", "hashrate": 16706137443, "estimate": "0.00003", "24h_blocks": 78, "24h_btc": 0.00431345, "lastblock": 3109465, "timesincelast": 3132, "error": "", "symbol": "ARG" }, ... |
|
|
|
missing zpool Hi! Have some issues with your API 1) Shares and Hashrate is 0 for all coins 2) Workers stats shows for whole ALGO not per COIN I have 4-5 pools with the same problem, and still didn't fixed it on my side... I've added back the hashrates, but not shares. Shares is really irrelevant and just unnecessary load on the api. You can get workers either way. https://zpool.ca/api/currencies - is per coin https://zpool.ca/api/status - is per algo https://zpool.ca/api/blocks - is blocks |
|
|
|
Good afternoon Your pool does not give data (API) hashrate and workers, is it planning to fix the error? Our service www.new-coins.online has stopped working correctly on your pool. I've added back the hashrate for now. not sure the usefulness of the shares so it's still 0. Workers has always been there and seems it has values, not sure why you see 0? What API are you looking at? |
|
|
|
Hi, We've added LUNEX to the miners multipool: www.zpool.caCheers |
|
|
|
Hi, We've added CURV to the miners multipool: www.zpool.caCheers |
|
|
|
missing zpool |
|
|
|
Hi, We've added SLC to the miners multipool: www.zpool.caCheers |
|
|
|
Hi, We've added SPLB to the miners multipool: www.zpool.caCheers |
|
|
|
|
Show Posts
