1.2.1 shows the same error as 1.2.0 after entering IP and Secrete phrase in http://localhost:8125/admin.html#to get the hallmark HTTP ERROR: 404 Problem accessing /nxt. Reason: Not Found Powered by Jetty://
|
|
|
Why is there never a simple download link, that would ALSO work from the command line? ?
|
|
|
I want to run a node. I got a fix IP, I got 100 MB line, I got a NAT router with port forwarding.
I followed the instructions of NXT, but by entering the information for the hallmark, it ends in page not found. What do I need to change to get over that point?
|
|
|
@Elmit looks like you should send some of those 1915.49 coins from polo to bittrex because you did not have enough there to cover the arb of 354.55 coins.
I expected that this will be automatically done!!! Maybe I missunderstand arbitrage at all. I thought it means, if there is a better rate at the other side, then transfer coins over. I read the line: BuyFrom Poloniex at a rate 0.00000143 354.55 <coins>, sell it to Bittrex at 0.00000146 as: send 354.55 <coins> from Poloniex to Bittrex Now, even worse, my coins at Poloniex are gone!!! No trading history at Poloniex, but now zero.
|
|
|
somehow my arbitrage trading does not work. Please explain me the reason:
Quatloo Trader 2.3.1.7 Bittrex BTC: 0.00195 Poloniex BTC: 0.0014 BTC holdings to use (tried to use:) 0%, 10%, ... 100% Coin holdings to use (tried to use:) 30%, ... 100% Minimum arbitrage: 1%
Bittrex Coin Balance: 13 Poloniex Coin Balance: 1915.49
Bittrex Buy Poloniex Sell Poloniex Buy Bittrex Sell Arbitrage 0.00000146 0.00000143 0.00000140 0.00000155 Yes 2.10%
BuyFrom BuyRate SellTo SellRate Quantity Percentage Result Poloniex 0.00000143 Bittrex 0.00000146 354.550625 2.10 Fail - exceeded <coin> percentage allotted for arbitrage in Bittrex or balance is 0
Which value does not match?
|
|
|
I think that is too much. I prefer instead of new feature to fix all open things first.
|
|
|
It seems alphacoin is dead!!!
The wallet cannot sync anymore, even with 8 connections I am 795716 blocks behind. There is no maintenance anymore at github.
R.I.P.
|
|
|
I use the program now for a week and found some parts that could be enhanced:
1. it would be nice to have the same column order for different exchanges, also the same font!!!
2. it would be better to use a different color schema for each exchange
3. BITtrex BaseCoinValue is the default sorting
4. CEX_IO has no accounts listing
5. CEX_IO Marketing History does not mention WHAT was traded
6. Export to Excel for decision making information is good, but Common markets is missing
7. One error popped up saying that I must have at least 1000 QTLs to operate the program, and I have 4000. This error does not go away till you restart the program!!! I have 3 windows open and had to set all for each trading pair again, ... It would be nice if we could use templates, or if the last setting for EACH coin would be saved automatically
8. Auto refresh after placing order does not work, if it is traded via auto pilot.
|
|
|
sh: ./make-release: No such file or directory
|
|
|
I thought it is time to upgrade from 3.99 (gridseed), which I downloaded then, ...
Now I did: sudo apt-get install bfgminer - that installed 3.10 again!!!
I downloaded the zip file and configured with: ./configure --enable-cpumining --enable-scrypt
sudo ./bfgminer finds my ~/.bfgminer/bfgminer.conf
which includes, beside the pools:
"api-listen" : true, "api-mcast-port" : "4028", "api-port" : "4028", "expiry" : "120", "expiry-lp" : "3600", "log" : "5", "log-microseconds" : true, "no-pool-disable" : true, "no-show-processors" : true, "no-show-procs" : true, "queue" : "3", "scan-time" : "60", "scrypt" : true, "skip-security-checks" : "0", "submit-stale" : true, "temp-hysteresis" : "3", "shares" : 0, "kernel-path" : "/usr/local/share/bfgminer", "scan" : [ "gridseed:all" ], "set-device" : [ "gridseed:clock=800" ], "api-allow" : "W:127.0.0.1", "api-description" : "BfgMiner 3.99.0"
When I execute bfgminer, it shows the gridseed devices, but does not find anything to mine. Changing the directory of bfgminer-3.99 let me mine immediately.
The pool uses nomp, just in case that matters.
What have I forgoten to do?
|
|
|
... So, I just downloaded the wallet to try out solo mining, then will probably delete it. Says that there are still a few people mining this coin other than me. Are any of them here? If so, I am curious why you are still mining a coin that is, for most intents and purposes, dead?
Where did you download the wallet?
|
|
|
I have some troubles with some wallets, compiling on a Ubuntu 14.04 machine:
alphacoin The link to download a compiled version is not valid anymore, not for Windows nor for Linux. I tried to use qmake/make:
/usr/bin/ld: cannot find -loleaut32 collect2: error: ld returned 1 exit status make: *** [alphacoin-qt] Error 1
noblecoin /usr/bin/ld: cannot find -lboost_system-mgw46-mt-1_54 /usr/bin/ld: cannot find -lboost_filesystem-mgw46-mt-1_54 /usr/bin/ld: cannot find -lboost_program_options-mgw46-mt-1_54 /usr/bin/ld: cannot find -lboost_thread-mgw46-mt-1_54 collect2: error: ld returned 1 exit status make: *** [noblecoin-qt] Error 1
Krugercoin does sync, but will never finish. The bar at the bottom ends, but the sync still remains.
How can I solve these three problems?
|
|
|
I have setup NOMP and it is running. Still there are a couple of questions, which I am not sure or fail to do.
1. I have setup for two coin daemons blocknotify. So far I do not see any possible usefulness of doing that. In fact it just bothers me to see lines on my screen telling me that it has NOT found a block:
sh: 1: /bin/blocknotify 127.0.0.1:17117 einsteinium 649fcbdba95bbeaf8f8693616893723e79687bfafbef7009d21899fcb1fd2c62: not found sh: 1: /bin/blocknotify 127.0.0.1:17117 42 d6abec322a7d8cbe6c1f5c3b90fae7eb101843612c3f4b96595e2bbd0fa0134b: not found sh: 1: /bin/blocknotify 127.0.0.1:17117 einsteinium bcada6ad3a4b35dc13e81af021b34833b792b4e8d44a54c1bfe2c61b5d38be6c: not found sh: 1: /bin/blocknotify 127.0.0.1:17117 42 0a948ea648760a00ef4f1ececeb61d3dcd117b918bb5674c23321b7c9f2c7405: not found
Is there a way to direct this to a blocknotify.log file instead. If I want to know it, I would look up there.
2. A pool config file starts with:
{ "enabled": true, "coin": "litecoin.json",
"address": "LeJZH5ZpD2F9o3FLEj7WpBodkW5x3wAZ6U",
"rewardRecipients": { "f720e6b8d6dd0572bd33781bcb64220eac57cb44": 0.9, "22851477d63a085dbc2398c8430af1c09e7343f6": 0.1 },
The "address" I got with: litecoind getaccountaddress "" LeJZH5ZpD2F9o3FLEj7WpBodkW5x3wAZ6U
Do I need to know the private key? If so, how to get?
Is it OK to use a key instead of a litecoin address for the rewardRecipients?
3. How can I retrieve the PUBLIC address of a miner, who is mining with a key? The idea is to get a page up showing for a miner all his balances in all currencies.
4. backup daemon I copy ~/.litecoin/litecoin.conf into ~/.litecoin/backup/litecoin.conf litecoin.conf looks like: server=1 gen=0 rpcport=9332 rpcallowip=127.0.0.1 rpcuser=lite_user rpcpassword=xxxxxx
What do I need to change for the file backup/litecoin.conf ?
Is it correct to start then the litecoin daemon with: litecoind -daemon -datadir=/backup
"at least one backup daemon" - how would I setup a second backup daemon???
In pool_configs/litecoin.json I would add in the "daemons" the second daemon: "daemons": [ { "host": "127.0.0.1", "port": 9332, "user": "lite_user", "password": "xxxxxx" }, { "host": "127.0.0.1", "port": 29332, "user": "lite_user2", "password": "xxxxxx2" } ],
(depending on what I have to set in the backup/litecoin.conf)
5. forever Do I need forever or forever-monitor or both? How to setup / use it?
6. IP tables I am lost what I need to do at a Linux system, to make it automatically. I understand that it allows me to enable/disable ports to the server. Some of the ports are coming from a webserver, NOMP web site, NODE irc site, some from the mining ports, ... What is a good idea to open/close? (I know better close all what you do not need, ...)
7. Website changes How can I add the information of Profit Result line: 2014-08-22 12:14:21 [Profit] [RESULT] Best coin for scrypt is fastcoin on Cryptsy with 0.00055581 BTC/day per Mh/s
There is also an error not showing the port for auto-switching. Does anybody have an idea how to fix it, or how to circumvent it hard coded?
... please jump in where you can add/clarify.
|
|
|
Do you know how to import it to Libre Office?
|
|
|
How can I track down the TypeError as mentioned above???
|
|
|
My portal config parts for switching are: "switching": { "sha256": { "enabled": false, "algorithm": "sha256", "ports": { "3333": { "diff": 10, "varDiff": { "minDiff": 16, "maxDiff": 512, "targetTime": 15, "retargetTime": 90, "variancePercent": 30 } } } }, "scrypt": { "enabled": true, "algorithm": "scrypt", "ports": { "4444": { "diff": 10, "varDiff": { "minDiff": 16, "maxDiff": 512, "targetTime": 15, "retargetTime": 90, "variancePercent": 30 } } } }, "scrypt-n": { "enabled": true, "algorithm": "scrypt-n", "ports": { "5555": { "diff": 10, "varDiff": { "minDiff": 16, "maxDiff": 512, "targetTime": 15, "retargetTime": 90, "variancePercent": 30 } } } } },
"profitSwitch": { "enabled": true, "updateInterval": 60, "depth": 0.90, "usePoloniex": true, "useCryptsy": true, "useMintpal": true, "useBittrex": true }
|
|
|
I got another problem, autoswiching died: TypeError: Cannot call method 'hasOwnProperty' of undefined at /home/ronald/nomp/libs/profitSwitch.js:452:36 at Array.forEach (native) at /home/ronald/nomp/libs/profitSwitch.js:450:51 at /home/ronald/nomp/node_modules/async/lib/async.js:610:21 at /home/ronald/nomp/node_modules/async/lib/async.js:249:17 at iterate (/home/ronald/nomp/node_modules/async/lib/async.js:149:13) at /home/ronald/nomp/node_modules/async/lib/async.js:160:25 at /home/ronald/nomp/node_modules/async/lib/async.js:251:21 at /home/ronald/nomp/node_modules/async/lib/async.js:615:34 at /home/ronald/nomp/libs/profitSwitch.js:407:25 2014-08-15 14:16:28 [Master] [Profit] Profit switching process died, spawning replacement...
How can I fix that?
|
|
|
I came a big leap further ;-) I found on http://pool.kryptochaos.com/mining_key how to create the address. This address now works even when it switches to another coin. However, how do I handle that? Where are the awards going to? How can I check it? If you know of a guide, please give me the link!
|
|
|
|