i have a 4 module batch 1 and by right it should be hashing at 100-120gh/s (MHSav and MHS5s) I made sure the heatsinks do not contact any capacitors or components but sometime after my latest round of cooling mods (placing alu heatsinks on the square mosfets?) on the lower 3 modules (1st mode at the top is left alone) the hashrate has dropped to around 85 to 104gh/s and my mhSav has dropped to 98500gh/s I have a power meter attached to the power socket for this unit and it confirms the actual power draw has dropped from the usual 970-990Watts to as low as 770-940Watts on the miner status pag, it still shows miner count 32, asic count 10. if there is a fault within the miners, does it reduce those numbers?
|
|
|
stats page is down but it is still working for the miner page? paying out, getting paid work as per normal?
|
|
|
added even more heatsinks while getting quotes for the cnc milling of my waterblock hope the double sided tape works because i used the same tape on the external heatsinks (mounted on the hotter side panel) and hung a lightweight 120mm fan on it and the heat caused it to lose grip. anyway i added them to the square blocks (chokes?) because they felt extremely hot (50+ degC) for the last 3 modules. the top module does not have air from the 2 main fans blowing over it unlike the lower modules, so the top module's pcb surface is actively cooled with just a scythe GT fan blowing air, without any heatsinks and it runs a lot cooler. so i found it strange that the
|
|
|
i heard US-based accounts have problems transferring money into btc-e
what about other countries?
|
|
|
does it affect solely american users
|
|
|
my options dont work at all
I've set it to pay out every 1 btc instead and set the nmc address but everything remains the same despite signature passing
|
|
|
why not use this i intend to use this because my avalon occasionally restarts but doesn't start mining until it's manually shutdown and restarted. my idea is that, i connect it to the mains (between the psu's power plug and the wall socket) and make it shutdown for the smallest duration every few hours. shutting down for say 15mins (not sure if there are shorter intervals) for every 4hrs is better than having a miner go offline for 4-5hrs or longer until someone is able to power cycle it for u
|
|
|
strange
i successfully signed the changes to payout every 1 btc but it still pays out every 0.2-0.3 bitcoins
|
|
|
selling a BNIB, not yet opened iron man 3 (midas). it's still sealed in the plain cardboard box. price will include DHL shipping to anywhere dhl is willing to ship. it will not include the poster as it's delicate state means bigger/standalone packaging which means higher costs. i will include the fan (just a plastic sheet to fan yourself) and the t shirt. the crumpled iron paper bag if you wish. Shipping from outside the US. Post your offers in bitcoins.
|
|
|
alright...
there's an option for switching miners, does it mean the balances are switched over to another address immediately?
i have changed to a bitcoin wallet to sign changes to my options
|
|
|
now my balance seems to be dropping... ? from 0.1404...to 0.1403 now 0.1402?
|
|
|
Try re-syncing your blockchain. I've had some payments not show but I know they'd been confirmed. On e I got MultiBit to replay the blockchain, they appeared. wizkid the payment for 0272 only appeared in my bitstamp address almost a day after it was sent out the previous payment of 0.74 appeared much quicker after it was "posted" on the table on the right of the stats page
|
|
|
i'm confused with this payout.. it says i've got a payout 0.272 bitcoins almost 11hrs ago and i've not seen it yet.
Payouts are direct from coinbase (generation/mined/mint). If you're using some online wallet and not a normal bitcoin client, there are known issues with this due to some of their sloppy implementations. I doubt there is a pool side issue. I can check if you post your mining bitcoin address. -wk 14r8kcWVPR8SXLZ65MjbjtHKcyRBiz5hQb
|
|
|
i'm confused with this payout.. it says i've got a payout 0.272 bitcoins almost 11hrs ago and i've not seen it yet.
|
|
|
basically i am looking for a dual action airbrush with 0.2, 0.3 and 0.5mm nozzles and needles
preferably ship overseas (Singapore) or ship to portland, OR.
kindly post your asking price + shipping.
|
|
|
try setting min fan speeds
i found a potential problem with the 20120721, not sure if it's fixed as i havent tried other versions yet
the funny thing is, once temps go below 48 (i set the threshold at 52) the fans drop to min rpm 840rpm then temp rises quickly, sends the fans spinning like mad again then cycle repeats
|
|
|
what's this "ERR: sock connected failed www.google.com could not be resolved (2: Server failure)" everytime i enter the captcha, i get this and after entering the mainpage and when i want to go to the dashboard or charts, i get the captcha again
|
|
|
How long have you been mining? The pool hasn't found a block in about 2 hours, so you won't see any rewards show up yet. And a heads up on PPLNS, your shares takes ~8 hours to be fully paid as blocks come in (which also means if you stop mining, your earnings will still be ticking up for about 8 hours).
oh ok, i thought i made a mistake with the connection/settings. mining for just about an hour? anyway the webpage for btcguild is still having issues right? no wonder i've been getting a lot of captcha verifications that day and connection issues today. thanks.
|
|
|
|